I need to create a formula that will reference row 3 in whatever column it's in.
If I copy the formula down the whole column I need it to always reference the third cell from the top. I've got a value in that row that I need all the formulas to use.
I have the following data:
column a: column B:
1
7
9
25
I need a formula to make column B equal to the current month adding the day in column A. so that column B equal the following:
column a: column B:
1 09/1/2009
7 09/7/2009
9 09/9/2009
25 09/25/2009
I'm having some difficulties in defining my formula. I'm pretty sure that this should be possible.
I have a table containing values and dates. For each change in dates, I should summarize every value for that date. I cannot use the autosummarize function, because I do not want the sum to be beneath the values, rather in a column to the right of the values.
I have created a formula which checks for a change in date: =IF(C15=C16;0;1) where the C column contains the dates. Basically I say that the Index column should contain a 0 if the date is the same as previously registered, 1 if it is a new date.
The index column is used in some conditional formatting rules, so I would like to keep it anyway.
Sheet1 is a report that expresses 90 days of information and Sheet2 has three columns of 365 day information. Sheet1 has a title, a today function for the date (cell B2), two columns (A5:A94 and B5:B94), and then some other info not relevant to the problem. Sheet2 has three columns (A1:A365, B1:B365, and C1:C365) with the date in column A starting at the first of the year and then two lists of information in columns B and C. I am wondering if there is any way excel would be able to recognize the Date (B2) on Sheet1 and be able to pull the information from Sheet2 starting on that date for the next 90 days.
For example:
My report always starts on the day I am accessing it. So... Say it is 1/15/13. My today function in Sheet1 (B2) would express 1/15/13. This date would be equal to A15 on Sheet2. So I would want A5 & B5 on Sheet1 to return B15 & C15 from Sheet2 respectively.
A5 Sheet1 = B15 Sheet2 & B5 Sheet1 = C15 Sheet2
A6 Sheet1 = B16 Sheet2 & B6 Sheet1 = C16 Sheet2
...
A93 Sheet1 = B103 Sheet2 & B93 Sheet1 = C103 Sheet2
A94 Sheet1 = B104 Sheet2 & B94 Sheet1 = C104 Sheet2
With that being said, the next time I open up my report, say a week from the 15th or 1/22/13 (expressed by my today function in B2), I would want A5:A94 & B5:B94 to reference the new set of information:
A5 Sheet1 = B22 Sheet2 & B5 Sheet1 = C22 Sheet2
A6 Sheet1 = B23 Sheet2 & B6 Sheet1 = C23 Sheet2
...
A93 Sheet1 = B110 Sheet2 & B93 Sheet1 = C110 Sheet2
A94 Sheet1 = B111 Sheet2 & B94 Sheet1 = C111 Sheet2
Is this at all possible?
I'm making a dashboard and currently using a camera tool to show a sheet in a different workbook.
However the camera shot should show the sheet for the current month. (the workbook contains 12 sheets one for each month)
I was trying to reference a cell within the dashboard workbook in the formula bar to select the correct month.
[Code] .....
This is the workbook being referenced and
[Code] ....
This is what I have to try select the sheet with the right month. W2 contains whatever month it currently is.
I get that this formula is wrong because I'm referencing a sheet/cell in the dashboard workbook right after calling the tracking workbook, I just don't know how to write it correctly.
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I am trying to figure how to show in one pivot table a current column and a proposed column. I have 15k rows of data. My data columns are employee, month, task, hours, proposed month. I can get a table that has months as columns and tasks as rows with sum of hours. What I would like to do is incorporate the proposed month, so that it shows hours in the months by current and proposed. That way my result would be January current, January proposed columns etc. I can change the propsed months by formulae so I want to play with the proposed task month the refresh the pivot table to see the results.
View 2 Replies View RelatedI'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
the MONTH(NOW()) Function, as I need it to reference the month preceding the current month.
View 3 Replies View RelatedI'm try to do a sum function on certain a column and the range will vary each time, the column will also vary.
I have the numbers of the rows but I also have the numbers of the columns, how do I get the letter of the column so I can use it in =SUM?
i did cur_col = ActiveCell.Column but I need it to return a number.
How can I use this code but tell it to select all but the right-most column? I have this piece of code...
View 4 Replies View RelatedI need a formula that will look in an array and return the first non-zero value it finds to the left of the column where the formula is located. For example, in a row with the following values:
$12,000 $- $- $24,000 $- $-
I would like to place a formula below each cell (in the next row) that reviews the row above and returns the first non-zero value to the left of the location of the current cell so that the results look so:
$12,000 $12,000 $12,000 $24,000 $24,000 $24,000
I know you can click a cell in a range, type ctrl-A, and select the current (used) region. Can you do this for a column? Select a cell in the column, type (?), and select the usedcells of that column.
View 3 Replies View RelatedI am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedI want to automatically populate C2 with the most current date from B9:B14.
I can't seem to figure out the formula.
How to add current date till the end of the column until data exists.
i used
With Range("A2")
.Value = Date
.NumberFormat = "mm/dd/yy"
A1 will have the heading and from A2 till data exists it should show the current date .i used above code it gives date in A2 but doesn't copy to the remaining rows.
From sheet1 on a checkbox click I am attempting to post the system date into sheet3 cell c3. If c3 already contains data then I want the cell selection to go down to the next row and post the date there. I if cell c3 has no data then it posts fine but if I need to goto the next row then I get a runtime error "object doesn't support this property or method".
If Me.GCN = True Then
If Not IsEmpty(Worksheets("GCN_Paid").Range("c3")) Then
Sheets(3).ActiveCell.Offset(1, 0).Select
Sheets(3).Range("c3") = Date
Else
Sheets(3).Range("c3") = Date
End If
End If
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this:
Private Sub ProductRegistration_Click()
[D4] = [D4] + 1
End Sub
On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
I have a spreadsheet with a column showing dates (dd/mm/yyyy). I need the column next to it to display the month only (Jan,Feb etc).
How do I create a column to show the month only using the date column as a reference.
I have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
I have a vba script that matches a date on two sheets then copies a formula based on the location of the date, the problem I am having is how can I refer to the activecell and active column without typing them manually as the range will change each day. See vba script below:
VB:
Sub find_date()
Dim FindString As String
Dim Rng As Range
[Code]......
setup:
Columns: c)6:00 AM, d)6:15 AM, e)6:30 AM
Rows: 4)tech1 Phone, 5)Tech2 Phone, 6)Tech3 Phone
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
I want to get value from reference one column and return value by corresponding row from another column. This can be done by vlookup column. But it find value from 1st column and return value from given relative column. That mean find from Left column and return value from right side given column number.
But I want find from Given column number and return value from given left column. For Further detail see the Attached file.
I have a blank file and a data file for current year with formulas.
So I am trying to take a couple of tabs from current year data file and pasting them into the blank file.
My question when is do that all the formulas get referenced to the current years file. i want to keep the same formulas but reference the tabs on blank file.
Is there a quicker way to do this rather and going into all the cells and changing reference from current years files data to blank files data.
trying to find the value of column A (date field) if it exists on the row that the cursor is presently on. I'm trying to check for the value before performing the next function to make sure the user is on a valid row. Cursor could be on any column A to F. Columns are always 6 but the rows can vary.
View 7 Replies View Relatedi have a sheet for monitoring sickness. i have used a macro before which automatically selects a range and emails it to recipients when i press a button. what i would like to do is have excel automatically choose the range for me based on today's day. in the attached example i would like column "A" copied along with the 5 columns before today's date, today's date column and also the 5 columns after today's date. paste the lot into an email and send. (i have highlghted the parts i would like copied and pasted into an email based on today's date (21st july).
View 4 Replies View RelatedIf column B is not empty, I want the corresponding cell in the same row of column A to contain the value "1".
View 9 Replies View RelatedI Basically need to use DATA in Column D of my file to add a ROW and then use Column C to name that new ROW added...
Example: [URL] ........