I'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
setup:
Columns: c)6:00 AM, d)6:15 AM, e)6:30 AM
Rows: 4)tech1 Phone, 5)Tech2 Phone, 6)Tech3 Phone
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I know you can click a cell in a range, type ctrl-A, and select the current (used) region. Can you do this for a column? Select a cell in the column, type (?), and select the usedcells of that column.
View 3 Replies View RelatedI have a sheet that begining in A3 and going down need to look for the First Instance of the text String "Loan Documents" and down to the last instance and select the corresponding range in column B.
Example: if the Text String appears in Range(A14:A32) I need the Range(B14:B32) to be my selected range.
From sheet1 on a checkbox click I am attempting to post the system date into sheet3 cell c3. If c3 already contains data then I want the cell selection to go down to the next row and post the date there. I if cell c3 has no data then it posts fine but if I need to goto the next row then I get a runtime error "object doesn't support this property or method".
If Me.GCN = True Then
If Not IsEmpty(Worksheets("GCN_Paid").Range("c3")) Then
Sheets(3).ActiveCell.Offset(1, 0).Select
Sheets(3).Range("c3") = Date
Else
Sheets(3).Range("c3") = Date
End If
End If
I have a vba script that matches a date on two sheets then copies a formula based on the location of the date, the problem I am having is how can I refer to the activecell and active column without typing them manually as the range will change each day. See vba script below:
VB:
Sub find_date()
Dim FindString As String
Dim Rng As Range
[Code]......
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
i have a sheet for monitoring sickness. i have used a macro before which automatically selects a range and emails it to recipients when i press a button. what i would like to do is have excel automatically choose the range for me based on today's day. in the attached example i would like column "A" copied along with the 5 columns before today's date, today's date column and also the 5 columns after today's date. paste the lot into an email and send. (i have highlghted the parts i would like copied and pasted into an email based on today's date (21st july).
View 4 Replies View RelatedThe first line of the code chooses the columns to select; all columns until there is no value. From there I need to have it sort those columns based on row 1. The problem is that the columns chosen are variable. It could be columns I:N (as shown below) or column G:Z or any other combination. (The code below was recorded if that matters at all.)
View 2 Replies View RelatedI am having trouble with my macro. I have attached excel sheet for reference.
Basically, I want a Macro that Looks up columns B & C of current sheet and matches it with table in the charges tab, and then returns hourly pay in column D.
I have created the macro but it's giving me Run time 1004 error.
Also, my formula is incorrect. Maybe that's why my macro isn't working?
2WayLookup_Macro.xlsm
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedI have to SET sh1, then activate sh1 before I can SET rng1. Is there a way to just...
Set rng1 = sh1.Range(Columns(1), Columns(11)) ' why doesn't this work?
Sub Raw_Sales()
Dim sh1 As Worksheet
Dim sh2 As Worksheet
Dim rng1 As Range
[Code]...
I am trying to figure how to show in one pivot table a current column and a proposed column. I have 15k rows of data. My data columns are employee, month, task, hours, proposed month. I can get a table that has months as columns and tasks as rows with sum of hours. What I would like to do is incorporate the proposed month, so that it shows hours in the months by current and proposed. That way my result would be January current, January proposed columns etc. I can change the propsed months by formulae so I want to play with the proposed task month the refresh the pivot table to see the results.
View 2 Replies View RelatedI have the following data:
column a: column B:
1
7
9
25
I need a formula to make column B equal to the current month adding the day in column A. so that column B equal the following:
column a: column B:
1 09/1/2009
7 09/7/2009
9 09/9/2009
25 09/25/2009
If i have row 10-20 in column A filled, what vba code would i need to select a range in column C that selects rows 10-20
If that 10-20 rows in column A chnages to say 10-50 the vba code will select 10-50 in column C
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I have defined my last row and column by using:
lr = Sheets("week1").Cells(Rows.Count, "A").End(xlUp).Row
LC = Sheets("week1").Cells(1, Columns.Count).End(xlToLeft).Column
Now how do I select the range starting at A2 through the last used column ( LC ) through the last row ( LR )?
What is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI wish to collect an arbitary range of data in a column. Hence I wish to identify were the data begins (for example C10) and where the data ends (for example C22), and then copy it and paste it at another sheet. How to do that with VBA-code?
View 9 Replies View RelatedI'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedHow would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
Sheets("Sheet1").Select
Range("W1").Select
Range(Selection, Selection.End(xlDown)).Name = "Problem_Area"
i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies View RelatedI have two sheets,one called pattern of about 25000 rows and one called rp1,
which is a fresh sheet downloaded each night from the web. What I want to do is select the names in column 3 of rp1 and printout in the same or a new sheet every row containing this name from the pattern spreadsheet.So for every horse named in col c,I want its complete record,could be 1 row or maybe up to 20 rows output,from the pattern worksheet(for each). They will all be underneath each other. I simply want excel to extract all the data belong to these names in rp 1 from the pattern large sheet. The names are in col r of the pattern sheet.
I have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.
1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.
How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedI have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View Related