setup:
Columns: c)6:00 AM, d)6:15 AM, e)6:30 AM
Rows: 4)tech1 Phone, 5)Tech2 Phone, 6)Tech3 Phone
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
i have a sheet for monitoring sickness. i have used a macro before which automatically selects a range and emails it to recipients when i press a button. what i would like to do is have excel automatically choose the range for me based on today's day. in the attached example i would like column "A" copied along with the 5 columns before today's date, today's date column and also the 5 columns after today's date. paste the lot into an email and send. (i have highlghted the parts i would like copied and pasted into an email based on today's date (21st july).
View 4 Replies View RelatedThe first line of the code chooses the columns to select; all columns until there is no value. From there I need to have it sort those columns based on row 1. The problem is that the columns chosen are variable. It could be columns I:N (as shown below) or column G:Z or any other combination. (The code below was recorded if that matters at all.)
View 2 Replies View RelatedI have defined my last row and column by using:
lr = Sheets("week1").Cells(Rows.Count, "A").End(xlUp).Row
LC = Sheets("week1").Cells(1, Columns.Count).End(xlToLeft).Column
Now how do I select the range starting at A2 through the last used column ( LC ) through the last row ( LR )?
I know you can click a cell in a range, type ctrl-A, and select the current (used) region. Can you do this for a column? Select a cell in the column, type (?), and select the usedcells of that column.
View 3 Replies View RelatedI am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View Relatedi have this excel sheet that am using as a monitoring device to track the login and log out patterns of a group of 20 agents. i am able to monitor their current state by using an external link to the local intranet and vlookup.
the status of agent can be either Logged In or Logged Out which populates in E6 to E25.
the cells f6 to f25 again running vlookup shows the last login time of the agent.
what i'm looking for is this:
every time the agent status changes from Logged In to Logged Out or visaversa, the corresponding blank cell in the row needs to populate the the time by value.
I am trying to write a formula that will have the cell display todays date if it is after 2:00PM, and if it is before 2:00PM I need the cell to display Today()-1. I have tried several iterations and I'm stumped.
View 5 Replies View RelatedI want a macro to take the current time and if it is less than 09:00am, I want it to set a variable to be the current time on the previous day.
Basically, an operational day runs from 09:00am to 08:59am the following day.
08:45am on Saturday 13 July (for example) should be recorded as 08:45am on Friday 12 July.
I thought i would create some code to highlight a batch of cells so i can modify formatting all together rather than cell by cell
I am unable to get the generated code to select all ranges together, it only shows the last range
Here is my code
Code:
Sub SelectRanges()
'
' Macro1 Macro
'
'
Range("D12:H12").Select
[Code]....
I'm getting a Run-time Error 1004 when using a Range(rangestring).Select.
It only seems to occur when I'm trying to select more than 35 cells. Up until 35 it works just fine.
My code is designed to select individual cells in a worksheet based on user selections from a list, and as I said, works fine unless they select more than 35 items.
Is there a limit to how many cells can be selected using Range...Select? If so, I can't find it documented anywhere.
I have a vba script that matches a date on two sheets then copies a formula based on the location of the date, the problem I am having is how can I refer to the activecell and active column without typing them manually as the range will change each day. See vba script below:
VB:
Sub find_date()
Dim FindString As String
Dim Rng As Range
[Code]......
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
I get the following error: Run-time error '1004': Select method of Range class failed at the following code line:
Worksheets("Sheet1").Range("A6").Select
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedI have series of data values like below. I have to find Maximum, Minimum values for each of these values.
9430
9822
10070
[Code].....
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
View 3 Replies View Relatedi want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies View RelatedIt is currently 11.40 AM. When I evaluate
Code:
?Now() > TimeSerial(11,30,0)
I get True.
However, when I evaluate
Code:
?Now() < TimeSerial(11,50,0)
I get False.
Why is this?
I need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
I have a sheet that begining in A3 and going down need to look for the First Instance of the text String "Loan Documents" and down to the last instance and select the corresponding range in column B.
Example: if the Text String appears in Range(A14:A32) I need the Range(B14:B32) to be my selected range.
I have a worksheet with a block of data. The size of this block changes.
I am calculating and storing the upperleft and lower right cell position of the block in say cells AA3 and AB3 on the same worksheet.
So far I have everything working fine.
Now I want to create a button to trigger a macro to sort that block.
I can figure out the button and make it trigger a macro.
One of the lines in the macro is
Need to select a range from colum A7 to E20.
Condition.
1) if the last colum (E20) should be selected if in the colum A equal to "Thank You".
I have a Macro that already works great but now I need to look for another variable to sort it down even further. I think it can be done by setting up a "Case" but still not sure how to do that. It already looks through the range to find all the rows that return a value of "True". Now I need it sort those results so it only returns what has a specified value in Column "AJ". I am looking to do several choices (Listed Here). So the end result will be all the items that return "TRUE" In Column "AI" and are Items that return one of these values per Case "Starters, Appetizers, Soup, Salad, Entree, Dessert, Special" with then copy over in the exact format that is listed in the code below.
For example All the items that are selected with "TRUE" can be narrowed down to all of those that are "Salad" as well - Then copied over in the exact format that is listed in the code below.
What I am doing is breaking out all the different course of food and putting a Header in-between each (That is already built and working) - So I can select all the food from a master list and then put it in order on the "Catering BEO" Sheet with Headers in between
Code:
Sub BEOA4()
Application.ScreenUpdating = False
Dim wsSource As Worksheet
Dim wsDest As Worksheet
Dim FoundX As Range
Dim FirstFound As String
Dim lastrow As Long
[code]....
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
If i have row 10-20 in column A filled, what vba code would i need to select a range in column C that selects rows 10-20
If that 10-20 rows in column A chnages to say 10-50 the vba code will select 10-50 in column C
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
What is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI am calculating multiple Correlations for long lists of data. I want the correlation based on the value in a given column. In the below example I would like a different correlation for each value in colA and the correlation will be between colC and colD. ColB lists the different people whose data are used for the correlations. In actuality there are 30 or more people for each test. In every case ColC is the same for a given value of ColB (although I doubt that matters). The number of people taking each test varies. I would like a correlation of ColC an ColD for each value of ColA.
Simplified version of my data
ColA ColB ColC ColD
Test1 Fred .75 1
Test1 Max .80 0
Test1 Sara .90 1
Test2 Fred .75 1
Test2 Max .80 1
Test2 Sara .90 0
....
Test100 Fred .75 1
Test100 Max .80 1
Test100 Sara .90 1
