Does anyone have a macro they have created or know of that can solve the X and Y coordinates on an ellipse? Would you be willing to share here or send it to me in a personal email?
View 9 RepliesI have a spreadsheet with a large table of data (values only no formulas). Whoever programmed it, they decided that cells with irrelevant entries should display three dots, i.e. "...". Problem is now need to clear these cells (so they are truly blank) but some of them have been auto-corrected in to ellipses and some have not. I wrote the following code:
[Code] .....
This is fine for the three dots that are just three dots, but for the ones that were auto-corrected to ellipses it doesn't work. How do I amend the code so that it clears the cells that are three dots and the ellipses too?
I have spreadsheet that tracks the the rain total for several days. I would like to be able to break it down to the days of weeks that has rain and how much without manually imputing the data.
Days | #of times | total amount
Mon
Tue
Wed
Thu
Fri
Sat
Sun
to allocate funds to various organisations with a number of constraints (see spreadsheet attached I work in Excel 2007 but saved the file in 2003):
1. No negative growth can be allowed (Column M which is difference between columns Q and B) and I therefore added Column N to bring the growth in Column R to 0% for those which had a growth of less than 6%.
2. Minimum growth however allowed should be 6%
3. Maximum growth allowed should be 50% (not all need to have 50% growth)
4. The balance of the allocations to organisations with growth more than 50% should be used to "equalize" allocations proportionately between the other organisations with growth lower than 50%
I am solving a mass balance for my wastewater class and need help using excel for find my unknowns. I have solved down to this EQN; 35,000=2367(SRT)/(1+.088*SRT) + 31.2(SRT)^2/(1+.088*SRT) + 88.8(SRT)/(1+.06*SRT) + 449*SRT + 224.6*SRT
SRT is my unknown.
I am trying to solve a set of simultaneous equations by using SolverOk function in VBA.
I dont want to use the 'SetCell' option so, I wrote the following
SolverOk MaxMinVal:=1, ByChange:= Range("V34:V36")
SolverAdd CellRef:=Range("AK4:AK6"), Relation:=2, FormulaText:="0"
SolverSolve
but I get an internal memory error. However, if I use the solver dialog box directly from excel and not through a macro and keep the 'Set Target Cell' as empty, I get the right solution.
How to solve table with filter which needs to be copy to other tab.
Example: One tab has table with filter. Issue is with another tab which needs to be copy but issue is that another tab will further investigate with additional columns. Can be solved this issue as first tab will filter and change all rows order and another tab should read content with added columns.
Is it possible in excel to find the equation for a curve?
I have 6 known x,y data points on a curve. I need to find the equation for the curve.
Can excel solve an equation for x with two variables.
Example: 102=125000(X-910)/50000.
I need excel to solve for X
The variables are 102 and 125000
I need the formulas to solve for the ARC length AB.
(How) can Excel solve this?
I will have to solve many variations of the 1 inch length and/or vary other measures.
Known's
Arc radius 1.5
Slope angle 31 degrees
Slope intercept to center of Arc Diameter 1
Circle B radius .75
Circle B is tangent to Slope
Solving the Segment length AB would be a bonus.
Given a list of numbers and a list of 'allowable' operators, come up with a specific total. ("The numbers game" on countdown on BBC2.... ooooh Carol Voderman)
For example, given the numbers 1, 3, 4 and 5 with valid operators +, -, /, * come up with a solution equal to 15. All numbers must be used once only. Use operators as often as required. The specific example above was given to me and I personally think its not solvable (might be a practical joke). But I am wondering is it possible to prove this through assertions or develop an algorithm to solve such puzzles. I can get 14 and 16, but not 15....
I am attempting to create a formula that is including numeric values in multiple cells but I want to exclude cells that have an "N/A" value. I am calculating the blended average price using the volume and price from multiple cells but some cells don't have volume or price but an "N/A" instead. The blended average price should be $68 but how do I calculate that including all the cells...even the cells including the "N/A"
Attachment example included.
Need to solve the formula in the file. Is it possible to solve this in just one move? in that case.
View 2 Replies View RelatedI am trying to create a formula to count the number of time the word "NEW" appears in one column, provided the result of another column gives a certain answer. Sample of my problem and question in detail on attached.
View 2 Replies View RelatedI have created a sheet that shows distance between coordinates. Also working on something to put them in order of the closest point. I used a fixed point to find the nearest coordinate, but since i'm using a fixed point it doesnt go the order I want it to. I have attached the excel file I am working on.
View 11 Replies View Relatedhow to get a single cell (C2) and (D2) to make the numbering format go from (## ## ##) to (######).
The Excel spread sheet is a coordinate converter, designed to take Degree's minuets seconds and convert it to Decimal Degrees, the formula is set up and work Great, but every time I copy and paste the coordinate to the excel spread sheet, i have to manuelly erase the spaces between the numbers so the formula can work properly. How can i get the cell to automatically delete the space between the numbers to save me time.(I.e 29 35 42.34325 -to-> 293542.34325)
I have the following data:
X Axis - Years (2004, 2005 ,...)
Y Axis - Quantity (imported, exported, produaced)
Z- Axiz - Name of the products
I want to make a graph with teh X, y,z axis in excel. When i use the 3D graphs in excel, it is not taking the z vales connected to teh cell.
I'm trying to create a spreadsheet that will convert coordinates from DDMMSS.00 to DDMM.000. I found another thread that discusses this same issue, but I was unable to make it work for me. I'm attaching a sample spreadsheet that basically shows what I'm trying to do.
View 9 Replies View RelatedI have an image which i have reduced to a mathematical representation of light intensities. We can consider each cell in my spreadsheet as a pixel, the value within the cell corresponding to how much light that pixel it took in during an exposure. There is a trend along the pixels that i would like to isolate as exactly as possible: a diagonal line, not quite straight from the bottom left corner to the top right.
What I would like to do, if possible, is to treat each cell in my spreadsheet as a point on a coordinate plane, and to use some type of formula or macro to give me a line of best fit using the positions of the highest valued cells as the data points in my extrapolation.
The tool I'm looking for would take data organized like this:
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 200 1 1 1
1 1 1 1 1 1 200 1 1 1 1
1 1 1 1 1 200 1 1 1 1 1
1 1 1 1 200 1 1 1 1 1 1
1 1 1 200 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
And give me an equation of the form y=1x + b (describing where to find the maximum values among the cells), although my actually data will need to be fit to a higher order polynomial.
Once I can do this, I will also need a way to take perpendicular sums automatically along the line of best fit at distance of two pixels in both directions and a width of one pixel. You can imagine drawing a rectangular box perpendicular to the line of maximum values and adding the proportions of each cell enclosed by that box. This means that for the example above, i would get 209 for all five points of interest: the maximum value plus the two values of one in the upper left perpendicular direction, the two values of one in the lower right perpendicular direction, half the values of the two cells neighboring the exactly perpendicular cells and a quarter of the outermost cells touched by our imaginary pixel box.
The following image may be useful in clarifying what I'm looking for. The red bar represents the imaginary box containing perpendicular pixel sums, where the green beam is the line of best fit derived from my maximum values.
Attachment 337419
Also, here is a snippet of my actual data to experiment with in solving these strange and exotic problems
Attachment 337420
I am trying to extract (and separate into 3 columns) the numbers only, positive or negative portion of (XYZ) Coordinates copied from AutoCAD and pasted into column A
X = 96179.9699 Y = 61973.9793 Z = 1368.0025
In column B,C and D, I have tried to use Find Mid and other means
i use a Trimble Total Station Survey equipment, This is used for suveying and measuring distances between points on jobs. These points can be exported onto the pc as a text file and imported onto excel, the file has a northing and easting to locate the point these are comma separated.
I would like to know if excell is capable of working out a distance betwen two of these such points by using the two pairs of northing and easting coordinates. The maximum distance between two points is no more than 50 meters. If for example when imported onto excel point 1's coordinates are locted in cells A1 and B1 and points 2's coordinates are locted in cells A2 and B2.
I have a userform, on it is a very large command button with a picture of a map loaded on the button. The button is 500 width(X) by 500 height (Y), so the center of the button would be at the location 250 (X) by 250 (Y). The button is coded for mousemove to get the X,Y cooridates and when you _Click the button a textbox gives the distance to the point(mousemove) from the center of the button. All that is good, but now I'd like to find the degree of the point referenced to a compass, ie, if the point is at 250 (X) and (Y) is less than 250 then the point would be due north at 0/360 degrees and if the point (Y) is greater than 250, it would be south of the center of the button. I hope this make sense. It's been a long time since trig. I've been searching but can't seem to find the correct formula to figure this out.
Here's the other problem, I'm doing this in powerpoint so I'm not sure if cos or tan functions are loaded in this program. I am posting this in the xl forum because I figure that's where most of the people who could figure this out are. If this is in the incorrect forum I can try to move it,
Is it possible to create a chart using spherical coordinates (radius, theta, phi) in Excel? I want to create something similar to this. I would even be willing to write add-in code to create the graph from scratch, but I don't know if that's possible. Is it possible to create a new chart type without using the other chart types as a base?
View 5 Replies View RelatedI have 2 columns of longitude and latitude coordinates. I want to count coordinates within certain ranges. A bit like using the Frequency function but for 2 sets of values and 2 bins arrays. This would mean I could create a table with latitute bins as the row headers and longitude bins as the column headings. Would anyone know how to do this?
View 9 Replies View RelatedI have a map with several waypoints and would like to find the distance between any of these two waypoints. Sounds simple, but I have having an issue with the later parts of the excel file. Let me explain further.
There are over 100 waypoints on this map we have. Each waypoint has an, seemingly arbitrary, X-coordinate and Y-Coordinate. However, if you divide the coordinates by [X], they turn into miles. It should go without saying that finding the distance between two waypoints is rather simple mathematically, but I having an issue figuring out how to pull two random waypoints and having the distance automatically calculated.
So far, I just have column A with the waypoint name and with column B and C having the X and Y coordinates respectively. Is there anyway I can create some sort of call function that when two waypoint values are entered it would automatically calculate the distances?
I have a cell in F2 that looks like this...
513 BLUE RIDGE
Kansas City, MO
(39.104810141000485, -94.47983043799968)
I need to isolate the coordinates in separate cells. IE "39.10481014000485" in cell J2 & "-94.47983043999968" in cell K2. The problem is that some of the cells don't have 14 numbers behind the decimal, and my formula will sometimes grab either the comma ( "," ) or the end parenthesis ( ")" ). Is there a formula I can use to isolate the two coordinate plots?
The good thing is every cell is formatted exactly like this. I had been using a formula that looks like this.
=MID(F2,FIND("(",F2)+1,18)
I think it's close. I just cant figure out how to tell the formula to stop at the first comma, and to stop at the end parenthesis for the second set of coordinates.
i am trying to enter the EndX coordinates (The third number: 500) by entering a number in a forms textbox
ActiveSheet.Shapes.AddLine(0, 100, 500, 100).Select
how can i break the code up to enter the coordinates via textbox's
I am running a fairly complex simulation at work and have quite a few different functions in it. For the simulation to work properly, i need to have the Solver add-in and the Analysis ToolPak installed. Everytime that i try and use the simulation on a different computer (or if anyone else tries to run it) the add-ins must be enabled again. Is there a way to set up a macro to enable them when either i open the simulation (first preference) or when a button is pressed (2nd preference).
View 2 Replies View RelatedI want to use a User Defined name look up its corresponding X/Y Coordinates , reference a list organized by categories, then go through each name in the list finding each's X/Y Coord Calculate distance.
SQRT((X-X)*(X-X)+(Y-Y)*(Y-Y))
where X and Y are Coordinates
& Return the name of the smallest Value.
If the could be longer I would have included "when multiple cells can contain the same value"
I have a very large dataset that I would like to apply the following searches to, but I will include a smaller sample that gets at the point.
For example; in the following sheet:
Cat Dog Lizard
Red 1 2 3
Yellow 4 5 6
Green 7 8 1
If I search for "2", I would like to get back "Red" and "Dog". I was able (by looking at other posts) come up with a series of formula that allow me to obtain the sheet coordinates and convert them into column and row headers (using SUMPRODUCT Row/Column); however, when multiple cells contain the same value, the output becomes the sum of that coordinate and is no longer a reference to a specific header, so a search for "1" would not give me "Red" and "Cat". Ideally, if I searched for "1" I would get back "Red" & "Cat" as well as "Green" & "Lizard", but I would be satisfied with a formula that even just gave me back one of the two header pairs.
JordanSample Workbook.xlsx