i am trying to enter the EndX coordinates (The third number: 500) by entering a number in a forms textbox
ActiveSheet.Shapes.AddLine(0, 100, 500, 100).Select
how can i break the code up to enter the coordinates via textbox's
Right now I'm modifying a figure based on size data in an excel table.
I'm modifying the X/Y coordinates of the points of the freeform shape with VBA, however, I have to use absolute x,y coordinates.
I'd like to be able to move the shapes throughout the sheet. With fixed coordinates, this makes it difficult. I'm hoping there's an easy way to it
Is it possible to find out if the selected item is a textbox through VB?
I have a picture in my spreadsheet which slight tilted. I want to add a text box on to that shape and add some text but i want the text to be angled the same shape as my picture.
If I create and rotate my text box manually, the default rotation makes it rotate slight to much.
I was hoping if I could add a custom drawing of a text box so the text can be the same a picture.
I have a couple of hundred string values in column A. I am trying to create the same number of rectangle shapes in column B, each one taking its name from the corresponding cell in column A. I keep hitting the dreaded 400 error code .
Attached File : test add shapes.xlsm
I am trying to convert some text from a number of cells to shape in another workbook. The problem is, if the text in one of the cells is too long (from testing it by too long i pretty much mean roughly 100 characters) then it doesn't pass anything at all to the shape. Is there a way around this so that all text will be converted to the shape regardless of its size?
By the way, the code is:
ActiveWorkbook. Sheets("Sheet1").Activate
ActiveSheet.Shapes("Text Box 1").TextFrame.Characters.Text = "1. " & Priority1Range.Value & Chr(10) & "2. " & Priority2Range.Value _
& Chr(10) & "3. " & Priority3Range.Value & Chr(10) & "4. " & Priority4Range.Value & Chr(10) & "5. " & _
Priority5Range.Value
The variables 'Priority1Range' represent the cell the text is in that I am trying to pass and it's variable type is Range. I have tried declaring the Priority1Range.Value as a string variable and using this instead but this doesn't work.
Is there a way to make the colours in a chart (pie, column etc) correspond to a value? I'm using Excel 2002, soon to start using 2003.
For example, imagine a normal pie chart showing the population of each country in North, Central and South America. But for each country, colour gradations would be used to show levels of wealth (e.g., GDP per capita) as follows:
saturated red = bottom 20% (poorest)
pink = 21-40th percentile,
white = 41-60%,
gray = 61-80%,
black = 81-100% (richest)
Is this possible? And not to get too greedy, but can you use even finer gradations -- say, with ten categories, as opposed to the five in the example above?
when i run the below code i get an error 438 'object doesnt support this property or method'
View 2 Replies View RelatedI have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
On the attached spreadsheet there is two irregular shapes. "Area1" & "Area2". I need to be able to determine which area the "ball" shape is located in. If the ball is in Area1 then "Multiply 8" gets the ball and "Multiply 9" moves to the blue cell "AH39". If the ball is in "AreaB" Multiply 9 gets the ball and "Multiply 8" runs to cell "S37"
I should be able to do the moving of the shapes using all the samples, its determining which area the ball is in is the problem.
In the real spreadsheet i will probably have around 10 different Areas.
Move Two Objects - Select Case.xlsm
I have created a sheet that shows distance between coordinates. Also working on something to put them in order of the closest point. I used a fixed point to find the nearest coordinate, but since i'm using a fixed point it doesnt go the order I want it to. I have attached the excel file I am working on.
View 11 Replies View Relatedhow to get a single cell (C2) and (D2) to make the numbering format go from (## ## ##) to (######).
The Excel spread sheet is a coordinate converter, designed to take Degree's minuets seconds and convert it to Decimal Degrees, the formula is set up and work Great, but every time I copy and paste the coordinate to the excel spread sheet, i have to manuelly erase the spaces between the numbers so the formula can work properly. How can i get the cell to automatically delete the space between the numbers to save me time.(I.e 29 35 42.34325 -to-> 293542.34325)
I have the following data:
X Axis - Years (2004, 2005 ,...)
Y Axis - Quantity (imported, exported, produaced)
Z- Axiz - Name of the products
I want to make a graph with teh X, y,z axis in excel. When i use the 3D graphs in excel, it is not taking the z vales connected to teh cell.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I'm trying to create a spreadsheet that will convert coordinates from DDMMSS.00 to DDMM.000. I found another thread that discusses this same issue, but I was unable to make it work for me. I'm attaching a sample spreadsheet that basically shows what I'm trying to do.
View 9 Replies View RelatedI have an image which i have reduced to a mathematical representation of light intensities. We can consider each cell in my spreadsheet as a pixel, the value within the cell corresponding to how much light that pixel it took in during an exposure. There is a trend along the pixels that i would like to isolate as exactly as possible: a diagonal line, not quite straight from the bottom left corner to the top right.
What I would like to do, if possible, is to treat each cell in my spreadsheet as a point on a coordinate plane, and to use some type of formula or macro to give me a line of best fit using the positions of the highest valued cells as the data points in my extrapolation.
The tool I'm looking for would take data organized like this:
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 200 1 1 1
1 1 1 1 1 1 200 1 1 1 1
1 1 1 1 1 200 1 1 1 1 1
1 1 1 1 200 1 1 1 1 1 1
1 1 1 200 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1
And give me an equation of the form y=1x + b (describing where to find the maximum values among the cells), although my actually data will need to be fit to a higher order polynomial.
Once I can do this, I will also need a way to take perpendicular sums automatically along the line of best fit at distance of two pixels in both directions and a width of one pixel. You can imagine drawing a rectangular box perpendicular to the line of maximum values and adding the proportions of each cell enclosed by that box. This means that for the example above, i would get 209 for all five points of interest: the maximum value plus the two values of one in the upper left perpendicular direction, the two values of one in the lower right perpendicular direction, half the values of the two cells neighboring the exactly perpendicular cells and a quarter of the outermost cells touched by our imaginary pixel box.
The following image may be useful in clarifying what I'm looking for. The red bar represents the imaginary box containing perpendicular pixel sums, where the green beam is the line of best fit derived from my maximum values.
Attachment 337419
Also, here is a snippet of my actual data to experiment with in solving these strange and exotic problems
Attachment 337420
I am trying to extract (and separate into 3 columns) the numbers only, positive or negative portion of (XYZ) Coordinates copied from AutoCAD and pasted into column A
X = 96179.9699 Y = 61973.9793 Z = 1368.0025
In column B,C and D, I have tried to use Find Mid and other means
i use a Trimble Total Station Survey equipment, This is used for suveying and measuring distances between points on jobs. These points can be exported onto the pc as a text file and imported onto excel, the file has a northing and easting to locate the point these are comma separated.
I would like to know if excell is capable of working out a distance betwen two of these such points by using the two pairs of northing and easting coordinates. The maximum distance between two points is no more than 50 meters. If for example when imported onto excel point 1's coordinates are locted in cells A1 and B1 and points 2's coordinates are locted in cells A2 and B2.
I have a userform, on it is a very large command button with a picture of a map loaded on the button. The button is 500 width(X) by 500 height (Y), so the center of the button would be at the location 250 (X) by 250 (Y). The button is coded for mousemove to get the X,Y cooridates and when you _Click the button a textbox gives the distance to the point(mousemove) from the center of the button. All that is good, but now I'd like to find the degree of the point referenced to a compass, ie, if the point is at 250 (X) and (Y) is less than 250 then the point would be due north at 0/360 degrees and if the point (Y) is greater than 250, it would be south of the center of the button. I hope this make sense. It's been a long time since trig. I've been searching but can't seem to find the correct formula to figure this out.
Here's the other problem, I'm doing this in powerpoint so I'm not sure if cos or tan functions are loaded in this program. I am posting this in the xl forum because I figure that's where most of the people who could figure this out are. If this is in the incorrect forum I can try to move it,
I have a text box and a command button, if i pass some specific values it will give me a message but when the given value is entered it states " run time error, mismatch ". My code is below
Should I change the text properties?
[Code] .....
Is it possible to create a chart using spherical coordinates (radius, theta, phi) in Excel? I want to create something similar to this. I would even be willing to write add-in code to create the graph from scratch, but I don't know if that's possible. Is it possible to create a new chart type without using the other chart types as a base?
View 5 Replies View RelatedI have 2 columns of longitude and latitude coordinates. I want to count coordinates within certain ranges. A bit like using the Frequency function but for 2 sets of values and 2 bins arrays. This would mean I could create a table with latitute bins as the row headers and longitude bins as the column headings. Would anyone know how to do this?
View 9 Replies View RelatedI have a map with several waypoints and would like to find the distance between any of these two waypoints. Sounds simple, but I have having an issue with the later parts of the excel file. Let me explain further.
There are over 100 waypoints on this map we have. Each waypoint has an, seemingly arbitrary, X-coordinate and Y-Coordinate. However, if you divide the coordinates by [X], they turn into miles. It should go without saying that finding the distance between two waypoints is rather simple mathematically, but I having an issue figuring out how to pull two random waypoints and having the distance automatically calculated.
So far, I just have column A with the waypoint name and with column B and C having the X and Y coordinates respectively. Is there anyway I can create some sort of call function that when two waypoint values are entered it would automatically calculate the distances?
I have a cell in F2 that looks like this...
513 BLUE RIDGE
Kansas City, MO
(39.104810141000485, -94.47983043799968)
I need to isolate the coordinates in separate cells. IE "39.10481014000485" in cell J2 & "-94.47983043999968" in cell K2. The problem is that some of the cells don't have 14 numbers behind the decimal, and my formula will sometimes grab either the comma ( "," ) or the end parenthesis ( ")" ). Is there a formula I can use to isolate the two coordinate plots?
The good thing is every cell is formatted exactly like this. I had been using a formula that looks like this.
=MID(F2,FIND("(",F2)+1,18)
I think it's close. I just cant figure out how to tell the formula to stop at the first comma, and to stop at the end parenthesis for the second set of coordinates.
I am running a fairly complex simulation at work and have quite a few different functions in it. For the simulation to work properly, i need to have the Solver add-in and the Analysis ToolPak installed. Everytime that i try and use the simulation on a different computer (or if anyone else tries to run it) the add-ins must be enabled again. Is there a way to set up a macro to enable them when either i open the simulation (first preference) or when a button is pressed (2nd preference).
View 2 Replies View RelatedI want to use a User Defined name look up its corresponding X/Y Coordinates , reference a list organized by categories, then go through each name in the list finding each's X/Y Coord Calculate distance.
SQRT((X-X)*(X-X)+(Y-Y)*(Y-Y))
where X and Y are Coordinates
& Return the name of the smallest Value.
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies View RelatedThe Code will not add the found values into the userform textboxe's.
View 14 Replies View RelatedIs there a macro that will copy the values in a textbox (TextBox1) to the clipboard so they can be pasted into an access database?
View 1 Replies View Related