1st Occurrence Displaying Value In Cell To Left
Nov 15, 2006
see attached. The only reason why I include an attachment is because the computer I am using at work is crippled and I cannot download a program which would allow me to display in the message body. A10:C12 is to be a summary of the respective values in A30:C36. I want a formula which will find the first occurrence of a revision number in B30 to B36 and apply the date in the cell to the left to the respective revision number to the above summary date column [[A10 to A12]. B30 to B36 is always unsorted order. It has to allow for lines in A30:C36 which have no entries. Line 32 and Line 33 is an example of this.
In other words, based on the above example, A10 would show date 02/01/06, A11 would show 03/22/06, and A12 would show 04/14/06. Each revision number in B30 to B36 is consistent with regard to the particular revision being the same date. The reason for wanting first occurence is because any one revision in the summary may consist of a number of revision amounts below, each having the same revision number. inally, although I would like to retain the particular column order in the example, if necessary, I can reverse A1 and B2.
View 6 Replies
ADVERTISEMENT
Nov 19, 2009
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
View 3 Replies
View Related
May 8, 2014
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
View 9 Replies
View Related
Dec 24, 2013
I'm getting an export from a CDR. This export contains the date and times people log on and off from a queue. For logging in they dial 511, for logging out they dial 512. They get a voice prompt and type their password. I need to know how much time they daily spend in this queue
At first this looks pretty easy. I just make a sum of all the times they called to 511, then a sum of all time they called to 512 and finally I substract those values and I end up with the correct time spend in the queue.
The problem comes when they call multiple times to 512 without actually logging off. For example, they type the wrong password or simply hang up.
Result is this in the CDR
FROM TO DATE TIME
101 511 23/12 08:34
101 512 23/12 11:58
101 511 23/12 12:34
101 512 23/12 14:45
101 512 23/12 14:47
101 512 23/12 15:00
The actual time spend in the queue is 5 hours and 50 minutes. But Excel calculates this as 35 hours and 22 minutes, because it counts the 512 values no matter what.
How can I make sure that Excel only calculates the values of they are either the last value in the row OR if they are preceded by 511?
View 2 Replies
View Related
Sep 16, 2013
I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .
My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).
As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.
Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.
And also if A=B then I want to make that unwanted value cell="".
View 1 Replies
View Related
Jun 26, 2003
I have data across rows in which I want to find the 1st occurance of a non blank cell and return this as a reference.
The formula in col A was kindly provided by Aladin, this finds the last entry, can this be tweaked? I'll be honest and say that I dont't quite understand how it works.
Row 5 should return 2
Row 9 should return 29
View 9 Replies
View Related
Dec 21, 2013
I have a value in $ED$1. This is Value X.
Row A = $DO$7:$DV$7
Row B = $DO$10:$DV$10
[Formula location = $EE$1]
Where Value X occurs in Row A, l want to return the parallel cell in Row B.
Both rows are sorted in numerical order. There is a slight complication though: Row A might contain multiple occurrences of Value X. If Value X is repeated several times in Row A, I want to find the left-most occurrence of Value X in Row A, i.e. the one closer to Column DO.
View 5 Replies
View Related
Jun 10, 2014
count occurence of name Vijay in single cell b4. excel formula.
Vijay is good, Vijay lives in Delhi. My another friend with same name Vijay….. Vijay joined exl in 2008. Vijay has one sister named Vijaya.
View 9 Replies
View Related
Jul 8, 2006
I have just been thrown back into programmng after a two year break so I am obviously rusty.
I have the following
Sub NumberOfReceiptFlowsAfterInitial4()
Dim my_cell As Range
Dim first_one As Double
Dim second_one As Double
Dim running_total As Double
Dim final_total As Double
Dim result As Double
I need something similar to this routine that will find the last occurrence of a cell that contains the value greater than or = 1%.
View 9 Replies
View Related
Jul 12, 2014
I have a lookup table in which names of students and the planned session dates are available.
I need to create a chart that has Student Name and Each date of month. The chart should have value of 1 wherever a match is found in the look up table.
I am wondering if combination of searching for multiple strings (student name and date ) will work somehow. The below image explains my problem
StudentTimeTable.png
View 5 Replies
View Related
Jun 5, 2008
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:
Function Nth_Occurrence(range_look As Range, find_it As String, _
occurrence As Long, offset_row As Long, offset_col As Long)
Dim lCount As Long
Dim rFound As Range
Set rFound = range_look.Cells(1, 1)
For lCount = 1 To occurrence
Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole)
Next lCount
Nth_Occurrence = rFound.Offset(offset_row, offset_col)
End Function
The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1)
Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.
View 2 Replies
View Related
Oct 1, 2008
I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.
My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.
Here is the code I presently have for this part of my macro.
Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")
If strFind = vbNullString Then Exit Sub
With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else
View 9 Replies
View Related
Feb 5, 2009
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
View 2 Replies
View Related
Feb 18, 2010
Refer to the attached worksheet. On entering a value into cell C7, I'd like the value of the adjacent column D7 to be displayed in F6. Then when a value is entered in manually into C8, it will then update and put the value of D8 into F6. The idea is an individual will enter a value each week, updating that value. I intend to hide column D.
View 2 Replies
View Related
Jul 19, 2006
I want to have a function that finds the largest number in a selection range. However, i want it to display what's in the cell beside it! Example:
Say the largest value is in B6 well I was wondering how you would go about displaying the value in C6.
View 5 Replies
View Related
Apr 23, 2012
I have a Cell and the Formula for my Cell is the Following:
Code:
="Week Ending " & 'A01'!D248
The A01 Worksheet displays the value as 4/21/2012 . However, the first worksheet displays the value as
Code:
Week Ending 41020
rather than
Code:
Week Ending 4/21/2012
What can I do to display the cell the way that I want to? I've already tried formatting the cell directly as Date to no avail.
View 3 Replies
View Related
Jan 21, 2010
I am using the following math formula in cell C12:
=IF(B12="","",IF(B12<2,-1,INT(B12/5)))
What I want to do is if cell B3 equals a text value of the word "All" then cell B12 would display nothing. If B3 equals any other value then the math formula above be used.
View 6 Replies
View Related
May 27, 2006
I have a spreadsheet and certain cells are coloured to represent certain
criterier, I would like to display all of one coloured cells to show status
of that colour, say I want all the red cells locations to be displayed so
that i can check the status.
View 9 Replies
View Related
Nov 20, 2012
TWO more days to turkey day. 3 more to BF --- yaaaaak! Anyway,
Iam trying to display only 3 workdays in each of three cells. Days displayed depend on today's date.
I am usinf the following but it displays SAT and SUN.
Q3 = today's date
=UPPER(TEXT(Q3+2,"DDDD")) displays THURSDAY
=UPPER(TEXT(Q3+3,"DDDD")) displays FRIDAY
=UPPER(TEXT(Q3+4,"DDDD")) displays SATURDAY -- would like it to display MONDAY
Q3 changes to reflect today's date
therefore this would display:
=UPPER(TEXT(Q3+2,"DDDD")) displays THURSDAY
=UPPER(TEXT(Q3+3,"DDDD")) displays FRIDAY
=UPPER(TEXT(Q3+4,"DDDD")) displays MONDAY
In other words I want to display only the week days in these 3 cells.
I tried:
=TEXT(WEEKDAY(INDIRECT("Q3")),"dddd")
but "Q3 + 2" will not work
the end result desired:
MONDAY
TUESDAY
WEDNESDAY
TUESDAY
WEDNESDAY
THURSDAY
[Code] ......
View 3 Replies
View Related
Sep 3, 2008
Am trying to create a simple spreadsheet with some multiplication functions on it. Using this example:
Cell A1 = 5 (multiplicand) x
Cell A2 = 10 (multiplier) =
Cell A3 = 50 (product)
All is well providing I have a number value in cells A1 and A2. When I don't, I would like them to remain blank, as well as A3, the product. The problem I face is when I remove the values in either A1 or A2, what's displayed in A3 turns to the word - #VALUE!. Which also shows up on the printed page.
My question is, like removing the checkmark for "zero values" under tools and options to prevent the "0"'s from being displayed, is there a way of preventing the word "#VALUE!" from being displayed when the values for the multiplicand and/or multiplier have been removed?
View 9 Replies
View Related
Jan 8, 2009
Is there a command or macro to display the name of a sheet in a cell?
I know how to do it in a header or footer, but not in a cell.
I need to copy the name that appears at the bottom of a spreadsheet in a cell at the top -- no need to reference the name of a different sheet, just the same one the cell is on.
View 9 Replies
View Related
Nov 12, 2009
Each time my spreadsheet is modified and saved, I would like the date of this action to appear in a cell. I think this may involve VBA but I'm not sure.
Let's just say, the cell is L54. I am using Excel 2007.
View 9 Replies
View Related
Apr 4, 2007
I have a row of raw quality control data, but some are not in control and should not be used in the calculation of statistical data. There are not a lot of them, so I can manually select these (I use a red fill color for the cell to signify bad data), but I would like to be able to keep these data displayed but not have them included in the calculations.
View 3 Replies
View Related
Apr 24, 2007
My head hurts from working on this all day. I have a large spreadsheet and in the top left corner I need to show the percent of vehicles that are not working out of our whole pool. I have a function that detects the color of the cell (Red is broke) and counts the total of red cells and then divides it by the total giving the percent and it is in G118 for Jan 1/2007, H118 for Jan 2/2007 etc. I made a function that will count Julian days from Jan 1, so for today I get 114. I know I need to display G + 114 columns but have no idea how to get that column name from this and always display the current one in the corner.
View 9 Replies
View Related
Sep 20, 2012
I have column h with address number.
I have column k with street name.
In column iv i have an x an number or it is empty.
What I want to do is press a button and it starts at iv10 read that cell if empty then read iv11 etc.
When it reads x in the cell then read next witch will be a number.
Example:
iv10
iv11
iv12
iv20 x
iv21 21
So I would get columns a - ae and rows 10 - 21 displayed and wait till i press button again then when i press button it starts
Example
iv22
iv23
iv89 x
iv90 68
then it would display a-ae 22 - 90
View 1 Replies
View Related
Nov 13, 2013
I'm looking for a way to insert / display images in a worksheet depending on the value in a cell. The following link is able to do what I need, but it's very limited - i.e. all images must be present in the worksheet first and only the one require is visible:
McGimpsey & Associates : Excel : Display picture based on cell value
I'd prefer to store the images in a normal folder in windows (for a large library of images) and have Excel retrieve the image somehow.
View 1 Replies
View Related
Jun 3, 2009
I have 3 'speedometer' type images one for green, one for amber and one for red. I need to display ONE of these on a number of occasions depending on the value of a cell.
E.g.
If the value is 8.0 or above then I want to display the green one
If the value is 4.0 or above but below 8.0 I want to display the amber one
If the value is less than 4.0 I want to display the red one
View 9 Replies
View Related
Jun 3, 2009
look at the attached. In the estimate tab look at the box highlighted in yellow. Then look at the cells in pink (row 70). F70 is selecting the lowest maintenance value from the yellow box but I want C70 to display the hours associated to that value. The correct hours will need to appear according to what value is displayed. (this sounds confusing but look at the formula in F70 and you will hopefully see what im trying to achieve).
View 2 Replies
View Related
Sep 10, 2009
I need to display all text after first comma in a cell in another cell. For example
Text in A1 = 1.1, 1.2, 1.3. I need to display in B1 all the text after the first comma which would be = 1.2, 1.3
View 2 Replies
View Related
Jun 1, 2014
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies
View Related
