I have data across rows in which I want to find the 1st occurance of a non blank cell and return this as a reference.
The formula in col A was kindly provided by Aladin, this finds the last entry, can this be tweaked? I'll be honest and say that I dont't quite understand how it works.
Row 5 should return 2
Row 9 should return 29
I'm getting an export from a CDR. This export contains the date and times people log on and off from a queue. For logging in they dial 511, for logging out they dial 512. They get a voice prompt and type their password. I need to know how much time they daily spend in this queue
At first this looks pretty easy. I just make a sum of all the times they called to 511, then a sum of all time they called to 512 and finally I substract those values and I end up with the correct time spend in the queue.
The problem comes when they call multiple times to 512 without actually logging off. For example, they type the wrong password or simply hang up.
Result is this in the CDR
FROM TO DATE TIME
101 511 23/12 08:34
101 512 23/12 11:58
101 511 23/12 12:34
101 512 23/12 14:45
101 512 23/12 14:47
101 512 23/12 15:00
The actual time spend in the queue is 5 hours and 50 minutes. But Excel calculates this as 35 hours and 22 minutes, because it counts the 512 values no matter what.
How can I make sure that Excel only calculates the values of they are either the last value in the row OR if they are preceded by 511?
I have a value in $ED$1. This is Value X.
Row A = $DO$7:$DV$7
Row B = $DO$10:$DV$10
[Formula location = $EE$1]
Where Value X occurs in Row A, l want to return the parallel cell in Row B.
Both rows are sorted in numerical order. There is a slight complication though: Row A might contain multiple occurrences of Value X. If Value X is repeated several times in Row A, I want to find the left-most occurrence of Value X in Row A, i.e. the one closer to Column DO.
count occurence of name Vijay in single cell b4. excel formula.
Vijay is good, Vijay lives in Delhi. My another friend with same name Vijay….. Vijay joined exl in 2008. Vijay has one sister named Vijaya.
I have just been thrown back into programmng after a two year break so I am obviously rusty.
I have the following
Sub NumberOfReceiptFlowsAfterInitial4()
Dim my_cell As Range
Dim first_one As Double
Dim second_one As Double
Dim running_total As Double
Dim final_total As Double
Dim result As Double
I need something similar to this routine that will find the last occurrence of a cell that contains the value greater than or = 1%.
see attached. The only reason why I include an attachment is because the computer I am using at work is crippled and I cannot download a program which would allow me to display in the message body. A10:C12 is to be a summary of the respective values in A30:C36. I want a formula which will find the first occurrence of a revision number in B30 to B36 and apply the date in the cell to the left to the respective revision number to the above summary date column [[A10 to A12]. B30 to B36 is always unsorted order. It has to allow for lines in A30:C36 which have no entries. Line 32 and Line 33 is an example of this.
In other words, based on the above example, A10 would show date 02/01/06, A11 would show 03/22/06, and A12 would show 04/14/06. Each revision number in B30 to B36 is consistent with regard to the particular revision being the same date. The reason for wanting first occurence is because any one revision in the summary may consist of a number of revision amounts below, each having the same revision number. inally, although I would like to retain the particular column order in the example, if necessary, I can reverse A1 and B2.
I have a lookup table in which names of students and the planned session dates are available.
I need to create a chart that has Student Name and Each date of month. The chart should have value of 1 wherever a match is found in the look up table.
I am wondering if combination of searching for multiple strings (student name and date ) will work somehow. The below image explains my problem
StudentTimeTable.png
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:
Function Nth_Occurrence(range_look As Range, find_it As String, _
occurrence As Long, offset_row As Long, offset_col As Long)
Dim lCount As Long
Dim rFound As Range
Set rFound = range_look.Cells(1, 1)
For lCount = 1 To occurrence
Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole)
Next lCount
Nth_Occurrence = rFound.Offset(offset_row, offset_col)
End Function
The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1)
Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.
I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro.
My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like.
Here is the code I presently have for this part of my macro.
Sub GetOpenFileName()
strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file")
If strFind = vbNullString Then Exit Sub
With Sheets(strSheetsMainCompProfile)
If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then
MsgBox strFind & " cannot be found on this sheet"
Else
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View Relatedin one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Relatedusing a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g
Started
Finishes
12-Nov-13
12-Dec-13
30-Jan-00
09-Nov-13
09-Dec-13
11-Nov-13
11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
=[@Started]+30
Make a cell blank if another cell is blank? This is my formula, it checks two dates. It is in cell M5.
View 4 Replies View RelatedI would like to lookup the last occurence of a particular cell value in a worksheet and use the cell value in the column immediately adjacent to this one in a calculation.
For example, The text "Run #" occurs several times in a sheet with a numerical value in the next column over. I would like to use the last occurence - or as far as that goes, the largest occurence of the numerical value. Unfortunately, there is additional data in between the "Run #" occurences, so a simple max() for the column will not work.
I am trying to extract the last occurence of ppp (4th column). So as long as 4th column is "ppp", i would want to extract the row wher the the last "ppp" occurence start and display in sheet2 "108-Jan-07vcdppp4". If data in 4th column is detected to be "ppp1", it would also extract the row wher the last "ppp1" occurence start and display in sheet2.
Note that the number of ocurrence is random and do not follow specific pattern. Pls see the attached for the example.
I have two sheets:
Sheet 1
Col A
A
B
C
D
Sheet 2
Col ACol B
AXX
BYY
AXX
AZ
DD
DD
I want to count the number of unique occurance of value in Col B in Sheet 2 as per value in Col A in sheet 1 and Sheet2.
My output result should be like following:
Result
Col ACount of col B value in Sheet 2
A2
B1
C 0
D1
I need to find out last occurrence of price (Last Date of Occurrence). Column A contains Date; Column B contains Highest Price of Equity Stock in that date. Reference price (Price we want to look up) is calculated in Cell E1, Cell E2 contains start of evaluation period (date), Cell E3 contains end of evaluation period (date). I want to find out the date on which "last" occurrence of Reference price in Column B "during the evaluation period" was found.
I have tried using array formula
{=MATCH(E1,IF(A2:A21>=E2,IF(A2:A21=E2,IF(A2:A21
I am trying to find a way to return an second answer for a second occurance using a VLOOKUP function. (maybe it can be done with something else?)
ex. range= A1:C3,
A1 = 40CA B1 = 30R2 C1 = TRUCK
A2 = 40CB B2 = 30A1 C2 = CAR
A3 = 40CA C2 = 30B3 C3 = TRAILER
VLOOKUP("40CA",A1:C3,3,FALSE) Returns "TRUCK"
How can I get a formula like this to return "TRAILER" the
second occurance of "40CA"?
[data] ....
I'm having a problem seperating the prices in Colomn H into three seperate cells C,E & G
The first figure in c is easy enough if a little long (any possible tidier solutions?)
The second Im not happy with it is clumsy using the fixed lenght figure "5"
The last I cant figure out probably because Ive done the second incorrectly!
Finally I can not see why figures apear in away team.
I have tried using the 'arbitrary lookup' function as listed here but can't seem to get it to work. [URL] .....
I have a list of all football fixtures and results in the premier league this season and I have a separate worksheet with a drop down menu to load each team.
What I am struggling to do is to get a function that will obtain the data corresponding to each of the home fixtures and the away fixtures of the team selected in the drop down menu.
I have managed to get the first result but do not know how to get the 2nd occurrence, the 3rd etc.
My formula for the first is
=INDEX(Fixtures!$A$3:$R$380,MATCH($E$1,Fixtures!$C$3:$C$380, FALSE),5).
I've attached the spreadsheet. (Unfortunately the format of the excel sheet can't be changed)
Forum Example.xls
