2 Cells With Time To One Cell
Jul 3, 2009
im trying to take 2 separate cells and combine the contents into one cell and put a dash or hyphen in between. like so
A1 = 8:00 AM
A2 = 5:00 PM
then have a formula to grab those 2 cells data and put them into one cell to look like this : A3 = 8:00 AM - 5:00 PM
or
A3 = 8 - 5 <---this one would be best...if possible.
right now for the i have one cell getting the A1 data and another getting the A2 data.... with this formula : =IF('CREATE SCHEDULE'!A1="","OFF",'CREATE SCHEDULE'!A1). its set up to leave a blank if there is no timeslot.
View 3 Replies
ADVERTISEMENT
May 12, 2014
I've attached an example workbook.
Trip Plan example.xlsx
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked.
Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
View 11 Replies
View Related
Feb 7, 2008
I'm trying to calculate whether a time value located in a cell is between the times in two other cells. Here is what I tried:
=IF((AND($A62>=C$55,$A62
View 9 Replies
View Related
Jan 6, 2014
i am trying to find the time difference between two cells and present the date in a third cell. The data in the cells are in a non standard date/time and i need to create a special format i think. The cells look like this.
fldcollected fldaccepted Type Time between being received by database and eccepted
2013-11-06 15:59:29.1002013-11-07 08:41:12.000PSTN
View 3 Replies
View Related
Mar 11, 2014
I needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
View 11 Replies
View Related
Mar 4, 2012
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
View 4 Replies
View Related
Dec 6, 2006
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
View 9 Replies
View Related
Aug 21, 2013
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies
View Related
May 23, 2008
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
View 4 Replies
View Related
Apr 2, 2008
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
View 4 Replies
View Related
Sep 6, 2006
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
View 6 Replies
View Related
Feb 24, 2012
I put the formula in cell which adds 2hrs in the current time. Now I want msgbox when the system time=time in cell. I want to do it from vba..
View 5 Replies
View Related
Nov 19, 2008
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
View 6 Replies
View Related
Dec 28, 2006
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies
View Related
Jul 24, 2007
I need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.
View 4 Replies
View Related
Mar 9, 2008
I have a problem regarding sorting data having date and also time within a single cell.
Example data (I have written it as code to preserve formatting)
A B C D E F
12/5/2008 02:072/5/2008 06:0128804833363
22/5/2008 18:012/5/2008 18:0599271297
Column B is start date and time whereas Column C is end date and time.
My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
View 9 Replies
View Related
Oct 20, 2009
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies
View Related
Feb 19, 2010
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
View 2 Replies
View Related
Mar 2, 2014
I need to subtract the time alone as per below example:
Cell A : 2/4/2014 8:58:13 AM
I need in Cell B as : 2/4/2014 8:46:13 AM (Minus 15 minutes)
How to get this?
View 2 Replies
View Related
Apr 22, 2009
I have data exported from a defect management tool (that reports all the defects that have been recorded in the defect management system). This data has unique columns for name of originator, defect ID, date originated, priority, etc. The date originated column has the date and time. I want to create a report that tells me how many High, Medium and Low priority defects were created on each date - and I am using a pivot table to do this.
However, because the date column is actually the date and time the defect was reported/recorded, the time element of this is making all the dates unique eg, I have three defects recorded on 29/01/2009, a High priority defect (reported at 29/01/2009 12:23) and two Medium priority defects (reported at 29/01/2009 13:02 and 29/01/2009 13:32). My pivot table is showing each date as a unique date - with a count of 1 against each, whereas I want to see 1 date entry (for 29/01/2009) with a count of 1 against High and 2 against Medium.
I have tried custom formatting the date column to dd/mm/yyyy - which appears to work in the data (but doesn't in the pivot table, because the time stamp is still there, just not visible). I have tried copy and paste special [Values] (on the custom formatted date column) -but the time stamp is still there. I have tried formatting the date column to "General", but this changes the dates to the number format - eg 29/01/2009 12:23 becomes 39842.5166203704.
I have tried inserting a new column and using the =Left function for the first 10 characters of the cell (ie the 29/01/2009), but that gives the first 10 characters of the number form of the date, ie 39842.5166. Basically, without going into every date cell (and I have thousands) and manually deleting all the times, how do I quickly change the date column into just having the date in it (ie how do I strip off the time element)?
View 3 Replies
View Related
Aug 12, 2007
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 Replies
View Related
Mar 3, 2007
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Mar 23, 2007
I have a simple macro that puts the function
now()
into the currently selected cell. Next time when I select another cell and put in the same function the now-time in the first cell changes to the new time. It seems like I can only have one now-time in the book. Is there a workaround for this? I like to put i now-time into one cell, while previous now-inputs remains.
View 6 Replies
View Related
Jul 22, 2009
I'm working on some data dealing with time fields, and I need to have them counted in 15 minute intervals.
For example, one of the entries listed in a column has an event starting at 02:25:00 and ending at 02:55:00 (30 minutes). Along the top row are times listed in 15-minute intervals, e.g. 13:00:00, 13:15:00, 13:30:00, etc. In the corresponding cells, if the entry took place within a particular interval, I need it to say "1", otherwise have it say "0" or "-" or something denoting no event.
An IF statement was used, but it didn't seem to work.
If that's a little hard to follow, check the example attachment for a better idea of what I'm trying to describe.
In the example spreadsheet, Row 2 (manually typed in) is what I'm looking for. Row 3 is the (failed) attempt to use the IF statement.
View 14 Replies
View Related
Feb 14, 2014
I have attached excel sheet. Column A consists of List of LAN numbers, Column B consists of List of Documents tagged & Column C consists of time at which particular document is tagged.
I need to calculate the time taken to tag all the documents in Lan1/Lan2/Lan3 in Column D. (I can ignore the date by doing text to columns).
View 3 Replies
View Related
Jul 19, 2014
How to proper set the Format cells for this?
Time returns always
2:01:23 PM2:01:26 PM
I would like to have
14:01:23 14:01:26
View 10 Replies
View Related
Feb 10, 2012
how to delete rows when a combinations of 2 cells in a row will repeat.
Example:
Row 1 51456264 150
Row 2 51456264 150
Row 25 51456264 160
Row 20 72546821 10
Row 21 51456264 150
Row 15 72546821 30
Row 17 72546821 10
Row 1 and 2 have the same combination of cells now Row 2 need to be deleted.
Row 1 and 21 have the same combination of cells now Row 21 need to be deleted.
Row 20 and 17 have the same combination of cells now Row 17 need to be deleted.
The cells in de same row always are next to eachother B and C.
I need to check a file with minimum 1000 rows .
View 3 Replies
View Related
Jun 18, 2012
I am using vlookup to get the values from another workbook. Is it possible: i use 2 Lookup_value & fetch the matching values. In workbook1: I want to Lookup_value A1 with another workbook2 AND ALSO Lookup_value B! with workbook2 & then fetch a vaue lying in the 20 column (Colm_index_num).
View 9 Replies
View Related
Jan 24, 2008
Is it possible to lock out a column of cells between certain times.
Lets say I want to lock the J column between the hours of 9 AM and 11 PM.
I only want the user to be able to enter data between 11 PM and 9 AM.
Is that possible.
View 9 Replies
View Related
