I am using vlookup to get the values from another workbook. Is it possible: i use 2 Lookup_value & fetch the matching values. In workbook1: I want to Lookup_value A1 with another workbook2 AND ALSO Lookup_value B! with workbook2 & then fetch a vaue lying in the 20 column (Colm_index_num).
I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries Mar Apr May Jun
Loans to banks Mar Apr May Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I need to sum the Time field, if the Temp Zone is = F. My problem is, as shown on the sheet, there are multiple days. As well, I need to pull the information for the totals (looking at 6 days worth of info) into another worksheet where the names (first column) are not in the same order, as some of the names are on this sheet, and some are not. I had a massively large vlookup statement, but of course, it's rather large and doesn't copy over well (when changing the days, it looses the last couple of lookups) ......
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
I was wondering is it possible to perform a VLOOKUP AND HLOOKUP in the same formulae or is there another way to perform this task. the attached example
I have a vlookup table with will define the Job description based on the job number & cost code. The function is working fine but the problem come when i try to convert it into macro.
I designed a spreadsheet which uses a lot of VLOOKUPs and it takes a very long time to recalculate. I don't know if there is another way I could do this, but this just seemed to make sense and it works just the way we want it but it just takes too long. Here is what the spreadsheet is designed to do:
We have data that is pasted into excel from another source. The data is broken up into account number, date, check number, and amount. Multiple payments from the same account can occur in one month so the data must be totaled. There is a custom function called concatif which works just like sum if but concatenates text. There are VLOOKUPs performed on the account number and the corresponding date, check number, and amount are inserted in the table.
i'm trying to take a selected row of about 7 cells (which are obviously all positioned horizontally) and have it inserted, via vlookup using the drop down option of 'Data Validation', to another location but having all the cells lined up vertically, meaning going down 7 cells. I would guess that a shorter explanation of what i'm trying to do is to have the vlookup transpose 7 cells.
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
I am making a personal expenses sheet to calculate my monthly expenses. i have each expense on my CC marked according to a validation list I have (for example Gas, Grocery, Shopping, etc)
How do i combine the Sum and Vlookup formulas to return the total amount spent on Gas for instance. This will be used for each of my type of expenses.
if its not possible, I can probably just write a macro.
I need a formula to look up an ID# from one sheet and return the sum of all cells (in another column) that have the same ID. I have security a security ID number and have a list of all holders of that security, but I need to sum the total value and total shares for a firm wide report.
I have a cell with the VLOOKUP function. I know that VLOOKUP searches down Column A until it finds what you told it to find, then returns the value of column you specify. The problem I am having is I will have the "item searched" listed more than one time and will need the sums of that item totaled.
My formula looks like this: =VLOOKUP(A63,March!$A$9:$G$42,7,FALSE)
For example, lets say that "Apples" are in A63. On the 4th of March I sell 4 apples, and on the 18th of March I sell 5 apples. I need the total in the formulated cell to read "9".
Really simple data sheet: list of names with homerooms Lookup table: list of homerooms with teachers. (named "Range")
=VLOOKUP(E2,Range,2)
Some of the cells return the correct name, others #N/A.
As far as I can tell they are all formatted exactly the same; I've tried several different formatting options. The correct ones stay the same; the no data ones do not change either.
I have the above formula set in a workbook. I have sheet 1 with my main information. I have sheet 2 with all my directives.
sheet 1 contains: cell c3= client cell c4= project The vlookup I have entered in cell c5 is to return a job number based on the project in cell c4 which is listed on sheet2. Problem is, I have multiple projects named the same. They're under different clients. I found a post that said I could use:
=vlookup(C3&C4,'Named Fields'!AH3:AM116,6,FALSE)
But that didn't work.
Is there any way to have vlookup find what's in cell C3, then proceed to cell C4 to returns the results in the 6th column?
i currently have a spreadsheet that uses vlookup and match to identify data that matches 2 criteria.
so there is a table with names on the left and dates on the top, and the dates change over time. this reference another table with the data for the names at all dates. therefore, the formula does is a vlookup with a match inside it.
this works well.
so say today is Jan 1. Columns 1, 2 and 3 are Jan 1, Feb 1, March 1 On Feb 1, columns 1, 2, and 3 are Feb 1, March 1, April 1
in column 4, i want it to equal the sum of the data for all dates beyond the date in column 3.
does this make sense?
i attached a small sheet i was working on to play around with these functions. in the sheet i just used numbers (1,2,3) instead of the dates for simplicity
Worksheet1!A2 holds a text value Worksheet1!B2 holds a text value
Worksheet2!D2 holds a text value Worksheet2!C2 holds a text value
Is it possible to use vlookup to find a match for Worksheet1!B2 in Worksheet2!C2 where the combination of Worksheet1!A2, Worksheet1!B2 is the same as the combination of Worksheet2!D2, Worksheet2!C2?
I have made a spreadsheet that essentially works out a cost dependant on which department the work was completed in.
I have a seperate tab with the department names in column A and the charge rates in column B
On the second tab I have a spreadsheet that has columns A and B for hours used and material cost.
The third column is the dept name
The 4th column is the variable charge rate which changes dependant on which department is put in colum 3
The 5th Column is the total cost.
In the 5th column I have this formulae:
=VLOOKUP(F7,'Variable Costs'!A3:B16,2,FALSE)
This work fine.
However, the spreadsheet has about 200 entries per week and all the cells in column 4 and 5 are showing "#N/A" becuase there are no values for them to work with.
I don't like seeing this and normally will use the "IF" function to say that if column A and B are greater than 0 then do the sum, if not show "0"
This for some reason doesn't work with VLOOKUP. Not the way I am using it anyway
I have attached the file, in the last sheet (Consolidated) i need to get the data from all the previous sheets, my problem is that whenever i have similar cells the data that is showing is only the first value and not the sum of all values,
SHEET1 Cell A1 HAS EIGHT CHARACTERS THAT MATCH THE FIRST 6 CHARACTERS IN A1 OF SHEET2. BUT, SHEET1 CELL A1 THE FIRST CELL HAS 8 OR MORE CHARACTERS.
HOW DO I GET A VLOOKUP TO COMPARE TO FIRST 6 CHARACTERS OF SHEET1 TO FIRST 6 IN SHEET 2? In columm B sheet1 i would like the result of column c sheet to, e.g. 9
E.G. SHEET1 A B C DOGGIEDO SHEET2 A B C DOGGIE 5 9
if it is possible to change a cell that the vlookup has found without scrolling all the way to that cell.
I have attached a small sample of my workbook. Once the vlookup has found the item I would like to change the number in G5 and make it change the number below in the OUT column that corresponds with the found item.
Example: row 11 is found with vlookup. i want to be able to change G5 to the number 8which will make G11 the number 8. And then make it stay even after i have done vlookup on another item.
I believe this will require a VBA code. Also I am using Excel 2007. I have added a test page. It is saved in 2007 format. If anyone needs it saved in 2003 please ask.
I have the following issue I have a fixed value in column N this is vlooked up into a cell in the same row after a specific cell value (category):
Toilet Category X Brush Category X Handle Category X Door Category X Computer Category X
The table above shows that the initial column is fixed i.e Toilet, Brush etc however the X's are dynamic but they will always be placed after the word Category. I think a VBA solution is needed but I can't figure out how to do it.
1. can i limit vlookup on sheet2 to search only a certain range of cells on a sheet1.
example, I want vlookup to look in sheet1, colum A - Y but only look between rows 1 and 100
2. If 1 can be done, and i happen to add a row in worksheet1 (making it 101 rows vice 100) will the vlookup code on sheet2 include that 101st row or do i have to redo the range manualy.
spans over columns A:BM. column headers are in Row 2, data starts in Row 3 the number of rows varies month-to-month in column A, the values are either N or Y. Column B contains xREF numbers, where if the value = N, the xREF is unique; for values = Y, the xREF = an N value xREF number (hope that makes sense!) Where column A value = Y, some row cells are empty. All N record cells are populated. starting in Column C, I want all empty cells (basically all rows where column A = Y) to be populated with a VLookup formula where: Ø lookup_value = xREF in column B Ø table_array = all N values records spanning B:BM
I can get it to work for column C by autofilling to the last row but if I autofill across columns, the col_index_num stays the same and I can’t figure out how to increase it by 1 as it autofills across.
Sub RangeLookUp() Dim Rg As Range For x = 3 To Range("A65536").End(xlUp).Row If Range("A" & x).Value = "N" Then Set Rg = Range(Range("B3"), Range("BM3").End(xlDown)) ActiveWorkbook.Names.Add Name:="TheRange", RefersToR1C1:=Rg End If Next x ' VLookup for blank cells........................