Column B is start date and time whereas Column C is end date and time.
My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
I am looking for a formula that will tell me how many days in each month for which a given time span is active. For example the time span 1/1/2014-2/28/14. I want to know the time span is active for 31 days in January and 28 days in February. Another example: time span of 1/15/2014-2/28/2014. I want to know that the time span would be active for 16 days in January and 28 days in February. I am looking for a formula that will capture the amount of days in each month for which the time span covers. as I only know how to write a formula with multiple if statements that require a different formula for each given month, rather than one formula that applies to all months.
I would like to calculate the weighed average rate( rate*qty/ total qty durig a period) for different periods say 2.00 pm to 2.01 pm, 2.01pm to 2.02 pm etc. Is there a way to do this by using database(dsum,daverage) functions. What will be the content of the criterion range? Or is there any other way of solving this.
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
I am developing a report that tracks the efficiency of industrial sorters on an automated assembly line. The line runs around the clock in three shifts (1: 7:30am to 3:29pm, 2: 3:30pm to 11:29pm, and 3: 11:30pm to 7:29am), and collects certain performance indicators, such as units processed. I am trying to calculate the units processed during each shift on each day. For example, if a run ran from 2:30 pm to 4:30 pm, and processed 100 units, I would want 50 units credited to shift 2 and 50 units to shift 3 (we are assuming a steady rate of processing).
My data arrives from the machine with the following columns (each run is a separate row):
B|D|E|G|H Run #| Start Date| Start Time| Units Processed | End date | End Time
I have successfully used the start time to determine the starting shift with IF statements:
=IF(--E3<0.3125,3,(IF(--E3<0.6458,1,(IF(--E3<0.9792,2,3))))) and a similar formula to calculate the end shift. This works fine if the run only spans two shifts within the same day.
My problem is that some of the runs, run across more than one shift and even across days. For example, a run that ran from 10:30 pm on one day to 4:30 pm on the next, would overlap 5 shifts and two days. I need to be able to figure out the proportion of time spent on each shift, and use that to get the proportion of units processed during each shift on each day.
I am currently thinking of a convoluted series of nested IF statements (and generating lots of columns to the right of my data for each potential shift within a run), but this seems inelegant and cumbersome. Is there a more logical way to approach this? Even more specifically, is there a function that can pair my start/end dates and times with a set of shift start/end times and calculate the elapsed time for each shift within a run? Something with MATCH or VLOOKUP maybe?
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells): 2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758 2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698 2005/11/03 00:07:13.830 2005/11/03 00:10:14.971
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have data exported from a defect management tool (that reports all the defects that have been recorded in the defect management system). This data has unique columns for name of originator, defect ID, date originated, priority, etc. The date originated column has the date and time. I want to create a report that tells me how many High, Medium and Low priority defects were created on each date - and I am using a pivot table to do this.
However, because the date column is actually the date and time the defect was reported/recorded, the time element of this is making all the dates unique eg, I have three defects recorded on 29/01/2009, a High priority defect (reported at 29/01/2009 12:23) and two Medium priority defects (reported at 29/01/2009 13:02 and 29/01/2009 13:32). My pivot table is showing each date as a unique date - with a count of 1 against each, whereas I want to see 1 date entry (for 29/01/2009) with a count of 1 against High and 2 against Medium.
I have tried custom formatting the date column to dd/mm/yyyy - which appears to work in the data (but doesn't in the pivot table, because the time stamp is still there, just not visible). I have tried copy and paste special [Values] (on the custom formatted date column) -but the time stamp is still there. I have tried formatting the date column to "General", but this changes the dates to the number format - eg 29/01/2009 12:23 becomes 39842.5166203704.
I have tried inserting a new column and using the =Left function for the first 10 characters of the cell (ie the 29/01/2009), but that gives the first 10 characters of the number form of the date, ie 39842.5166. Basically, without going into every date cell (and I have thousands) and manually deleting all the times, how do I quickly change the date column into just having the date in it (ie how do I strip off the time element)?
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
'light eligibility Dim facb As String Dim sunset As Variant [color=green]' check if facility has lights[color] facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights. Check to see if lights are needed. sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup. If rental_end.value > sunset Then rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ... lghtson = sunset - 0.5 0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
What I am looking to do is find the time it has taking to complete a task - So the work sheet has four cells (See below) and return the total time with cell E
Cell A Cell B Cell C Cell D Cell E June 5 10:00 AM June 6 12:30PM ????
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
I'm trying to develop a simple time / acitivity capture sheet for a time and motions study. I have a sheet called "Front" with a project number in C2, an activity drop down in C4 and a comments section in C6.
I need to paste these into sheet "Database" into the first blank cell in B:B for C2, C:C for C4 then stamp the date in the same row in D:D and the time in E:E.
I'm trying to devise a formula to produce "days in inventory" based on the following data:
Date In Date Out (which may be blank if cargo still here) Todays Date Days in Whse (which is the formula I can't figure out!)
It needs to work like this, date out - date in, unless date out is null. If date out is null, the result should be calculated based off of todays date - date in.
