2003 Conditional Formatting From Other Worksheet Value
Aug 18, 2009
I have a series of tabs with data, 25 columns by 600 rows, all with numbers. A cell should be red and lined out if its' corresponding cell on the very last tab is less than 50. I've tried to name range the area on the last tab (RawBuyers) and use it in a Formula Is CF on the first worksheet, but I get errors.
I'm seeking help with a CF formula that I can apply to each tabs data range.
I've seen threads similar to my issue, so I apologize if this is redundant (but nothing I've found is doing the trick.)
I use Excel 2003. I want to do a conditional formatting on a cell (e.g. A1), which value is from an If() formulas. The value could be a percentage or a text “DataNAvail”. The conditional formatting on A1 is based on another cell’s value (e.g. B1), which is also a percentage.
Since in Excel 2003 there are only three options for conditional formatting. I used two for green (A1 greater than B1) and yellow (formulas in A1 equals AND(A1<B1, A1>=B1*0.75)). I want to set A1 to red when its value <B1*0.75 or is “DataNAvail”. Since they are not the same type, I don’t know how to do it.
In column P of my Excel 2003 worksheet named: Data, I need the following text in the cells to have the interior colors (as shown below):
Any Situation - RGB = 255,204,0 (with black text); Apples - RGB = 153, 204, 0 (with black text); Apples / Rasberry = 153, 153, 255 (with black text); Jam = 128,0,128 (with white text); Nectarine = 0,0,128 (with white text); Nectarine / Apples = 255,255,153 (with black text); Nectarine / Rasberry = 255,204,153 (with black text); Orange = 255,153,204 (with black text); Rasberry = 153,204,255 (with black text); and Sausage = 0,0,0 (with white text).
The range is P3:P20
I tried using conditional formatting but it only allowed me to use three conditions.
I am having a fit trying to get this darn spreadsheet to do what I need it to do. I have to flag rolling dates on a spreadsheet (i.e. if a training date is to occur every three years, I need for it to change colors according to the date given - like if it is past three years, then it needs to turn red. if the date is in the next six months, it needs to turn green). I have already coded the spreadsheet to change dates every day, but when I use the EDATE function in the conditional response and try to copy it to the cells in the rest of the colum, it won't work.
I'm looking for a way to use conditional formatting to flag a cell in a list if the user enters a value that already exists in that list. Just trying to keep any values from being entered twice.
I understand how to set cond form to flag a cell, but not what criteria to enter to activate the formatting when a value has already been used.
Is there any way users can cut and paste while keeping the Conditional Formatting of the source cells intact? It is the same as copy-paste and then delete the source cell contents after copying.
I am using Excel 2003. I have a spread sheet and I am trying to use conditional formatting. But I can't figure out how to use conditional formatting across multiple columns and so I have been doing each column individually which has been kind of a hassle. I also am trying to figure out how to put in a formula so that every occurrence of a certain text will show up a certain color. I know that I can just do "cell value is", "equal to" and click on the cell, but the information in this spread sheet is organized alphabetically and is going to be added to frequently therefore every time I add information it re-organizes. This then messes up my conditional formatting because the text value that was in the cell gets bumped up or down.
I was wondering if it is possible to have cells formatted based on the presence of an autofilter? I have a large worksheet, and to clean it up I would like to make the entire sheet (minus the category headers) invisible. Then, when the user applies a filter, the cells become visible.
I am creating a heat map using two variables from a questionnaire: firstly the number of people impacted by a question; and secondly, the level of the impact. Respondents are asked to give these values in two adjacent cells. These are then multiplied to give a weight eg 1000 people x level 3 impact = 3000. I have used Conditional Formatting to colour the cell according to the impact level (0 = none - white (default), 1 = moderate - tan, 2 = significant - orange, 3 = high - red). What I want to do is then change the font size to give an indication of the number of people impacted, eg 1 - 1000 font 8, 1001 - 3000 font 12, 3001 - 8000 font 16, 8000 - 2000 font 24 etc. The size of font and colour will then represent the number of respondents and their impact.
I can't use Conditional Formatting as the value of 3000 could be derived from 1000 people at level 3 (red), or 3000 people at level 1 (tan). Is there another way of setting the font size depending on the cell value, eg by VBA?
On one of our computers at work, Excel is acting especially strange. The conditional formatting in Excel on one of our computers is not working. In addition, we cannot fill a cell with any color or change the color of the writing. We can click a color for the letters and type it in, but immediately after another cell is highlighted, the writing goes black again. When we try to highlight multiple cells with the cursor, the cells are black instead of the normal color. This happens to not just spreadsheets that are new, but existing spreadsheets on our shared drive from only this one computer as well. No other computers are affected this way. All other computers show the spreadsheets fine and do not have any functionality issues.
I am trying to use conditional formatting to find cells that have the word "managment" in the text. The problem I am having is that the cells may contain a paragraph and the word may be embedded in the paragraph. I need to either high the word or the paragraph. I can get it to work if only the word "management" is in the cell but not when I add other words to it. I have tried using *management* but this didn't work.
To protect formulas and formatting, I have code, which copies a row, with formatting and formulas, from a hidden sheet, unprotect the main sheet, inserts the copied row and reprotect the main sheet. This works great, except with conditional formatting.
My current conditional formatting works on the range: $A$3:$B$100. The copied row is inserted on Row 4. When done, this splits the conditional formatting to: $A$3:$B$3 and $A$5:$B$101, whether or not the copied row contains the same conditional formatting. This makes sense, but is it possible to maintain the original, all-encompassing range? Otherwise I'll end up getting thousands of conditional formatting for each insert.
I have a worksheet titled "detail" containing 3 cells which automatically and independently change colour subject to their proximity to various dates. On a new worksheet titled "overview" in the same workbook I would like to have one cell which changes colour if any of the 3 cells in the other worksheet are triggered.
I need to create conditional formatting on a worksheet where I need to change the cell colour based on 6 cases.
The VBA that I have found does not work with referenced cells to another worksheet in the workbook which I need as all the data is referenced with calculations.
I also need to specify the cells that the VBA will apply to as I need to apply 6 or 7 different different sets of conditional formatting on the same worksheet to different groups of cells.
I am trying to do a conditional format of 0 to 2 is red, 3 to 4 is yellow and 5 is green. However I also need to have a cell that is blank to remain white and this is the part I am having problems with.
I found the following code since I cannot use the standard conditional formating in excel since it needs 4 conditions.
Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer
If Not Intersect(Target, Range("H3:H12")) Is Nothing Then Select Case Target Case 0 To 2 icolor = 3 Case 3 To 4 icolor = 6 Case 5
I have a worksheet with a lot of different conditions applied to a lot of cells. I'd like to do some housekeeping, but to do that, I would like a clear and complete list of all cells that have conditional formats attached to them, and what the formula/criteria is for applying said format. I don't even care what the formatting is, but that would be nice too.
So, when I go to my "Conditional Formatting" screen, I get something like:
Now, this doesn't show me much of anything about what the formula actually is. I need to select it and look around. I'd rather just get a full listing of what the rule says...
And where I might have the same rule applied to different ranges of cells And so on.
I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.
Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.
I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue If AI3=D3 & D3 is red, format AI3 blue Otherwise, leave AI3 unformatted.
Asks almost exactly the question I have, but I can't make heads or tails out of the answers, I'm guessing becasue I have Excel 2003 and not 2007 as mentioned in the replies.
In column "A" I have a number; column "B" the formula =A1 copied on down and in column "C" either a 1 or 2 or a 3.
If the number in column "C" is a 1 then the font in the same cell in Column "B" should be black, 2 Blue and 3 Red.
I'm thinking this should be very simple, but so far it's not turning out that way. )-:
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
I have an excel file with 5500 records. I would like to have excel "color code" the rows based on a field's value
What I would like to do is have the value in column Y is: *NO* or "T/P" (note there are *'s in the value) to have it formatted with Grey shading/Red text "N/A" apply a different color shading and if "yes" apply a 3rd shading
Note, that I would like to have the entire row and not just the Col Y cell formatted. How can I do this? Would this slow down Excel alot?
I work in a call centre and I record my daily figures. My target is 82%, and I would like a bar chart in Excel 2003 to colour the chart according to wether I hit target or not. If my daily figure >=82% the bar should be green.
This script works great in 2003 in formatting text brought from Access, but fails in 97 - unfortunately I don't have direct access to Excel 97 - can anyone with it (or with a compendious knowledge of the differences!)
Is it possible to protect an inserted text box from being moved, stretched, etc. while allowing data input into the cell/s? I'm using a 2003 version of excel.
I've attached the sheet in question. The yellow text boxes are what I want to lock, yet still allow data input.
This refers to Excel 2003. I will be dragging contents of cells to another place on the same worksheet. To make myself clear, the text must be moved from the source cells to the destination cells, leaving the format of both source and destination cells - such as borders and fill - unchanged.
NOTE: I know that I can copy the cells and return to the destination cells to delete the content that I want to move. This wastes time when doing many drags and drops.
NOTE: I know that I can paste special, pasting the Values only. Again, this is a lot of extra clicking or keyboard shortcuts. Again this wastes time when dragging and dropping many times.
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
