I m sure this should be simple but the excell help in 2007 is infuriating
I have a macro invoked by ctrl t to toggle the worksheet that I am useing. I want it to work out which sheet is open and open the other one if the macro is invoked
here is the code I have got but it goes to the first sheet and then wont come back
Sub Atmos()
If Sheets("Work").Select Then
Sheets("Atmos").Select
End If
GoTo Last
If Sheets("Atmos").Select Then
Sheets("Work").Select
End If
GoTo Last
Last:
End Sub
How can I change the name of toggle button to "Disbale Download" after clicking on the toggle button? I am trying to find the answer on WROX Excel 200 VBA but I am lost.
I'm building a worksheet and I been struggling with writing a macro for this particular checkbox. As an example, I have Sheet 1 which contains my checkbox. When the checkbox is checked I want it to unhide sheet2 and when it is not checked, I want it to hide sheet2 again.
I have found that this only works on the sheet being viewed, how can I make it work on a different sheet than the one that I am on?
Option Explicit Private Sub Worksheet_Calculate() If Range("C1").Value = "5" Then ActiveSheet.Shapes("rectangle 1").Visible = True Else ActiveSheet.Shapes("rectangle 1").Visible = False End If End Sub Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Is there any way you can use VBA to assign a key to toggle between two different cell formats? I want to toggle a cell from white border with black text to black border with white text and visa versa, with the same key or button. I've searched the posts but can't find this mentioned.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday Dig Drive
Dave 4 5
Bill 2 7
Tuesday Dig Drive
Dave 2 7
Bill 8 1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig Drive
Dave 6 12
Bill 10 8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row Column Value
Bill Dig 2
Bill Dig 8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
I would like to add a makro that will ask, through a pop-up, to name a new sheet.I have the following formula that creates a new sheet and names it BMW and moves it around a little bit:
But I would like a formula that asks beforehand, through a pop-up, of a preferred name. In this case I will write BMW in the pop-up, and the new sheet will be named BMW.
I am working on a sheet in Excel 2007 and am having trouble with Excel toggling with a checkbox. What I want is for a cell to have "A" in it if the box is checked and a "B" if it isn't. The code I have is:
Sub CheckBox6_Click() If CheckBox6 = True Then Range("B20") = "A" Else Range("B20") = "B" End If End Sub
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) If Target.Cells.Count > 1 Then Exit Sub If Target = "" Then Exit Sub If Target.Address "$B$9" Then Exit Sub Sh.Name = Right(Sh.Range("B9"), 4) End Sub
Problem is i still have to toggle it in the formula bar before it changes. I have this formula ='Class List'!B10 in B10 which is feeding from another worksheet called Class List.
Is there a way to keep the drop-box on a combobox from showing at all? I am trying to build one that has several different values that will just cycle through when clicked.
Here a bit of code I am using so far, just as an example:
Private Sub ComboBox1_DropButt*******() If Range("F7").Value = "Yes" Then Me.ComboBox1.Value = "No" Else Me.ComboBox1.Value = "Yes" End If End Sub
Attempting to toggle autofilter (if on - then off, if off - then on). Found this here at Ozgrid, apologies lost the thread and author
Sub CheckForAutoFilters2() With ActiveSheet If .AutoFilterMode = True And .FilterMode = True Then .AutoFilterMode = False And .FilterMode = False Else .AutoFilterMode = True And .FilterMode = True End If End With
End Sub
I added the Else... piece. The code does turn autofilter off - if on. But not on - if off. (Hard to read) ObjectiveAdd drop down arrows to header row if autofilter off. That's it all data to reamin visible until user (me) takes some action.Show all data, remove drop down arrows if autofilter onThanks
I'm looking for a way to have mutually exclusive toggle buttons (i.e. only one can be selected at a time) embedded in a worksheet. It is possible with radio buttons but they won't serve my needs.
I am not able to add a new Excel sheet in a existing file when I right click next to the existing page it gives this option only and I am using Arabic Charcters + I am not having too many sheets
I have been tasked with overhauling some simple inventory records that are currently being tracked via multiple spreadsheets and in multiple formats over various years. Thus far I have combined the data into two simple sheets (1 & 2) of the same Excel workbook. The first is just the basic listing of current inventory and locations. The second is a record listing various shipments into and out of the company location as a history log. I'm going to be continually trying to clean up the data and make things easier for the staff. The shipping history/log (Sheet 2) contains basic information in columns that include the serial numbers of the items shipped, which correspond to the S/N's in the global list columns within the inventory sheet(1). I would like to find a way to set up where a column in the inventory creates upon click (or have a maco button with the ability to) a popup which will display the history of the current rows serial number. In effect, list all rows in the second sheet with corresponding serial number or as a reverse strategy; filter out the rows that do not have the same S/N listed in one of its columns.
A piece of inventory comes in and is logged into the global inventory sheet (1) with Serial # ks1254. Likewise the shipping sheet (2) has the shipping information and document info logged with the same serial # listed. This is item has arrived and been shipped out multiple times, and occasionally the history of this item is requested. I have a column set aside in sheet 1, that i would like to act as a trigger for the above request. So if I filter and find the mention item, I would like the trigger to go and select out only the rows in sheet 2 that correspond to the S/N of the item in question. This can be presented as a pop up tab, a small window, even as a new sheet altogether I suppose. I guess I'm using Excel 2007, have a very dated limited VB skill set, so just hoping for some direction and steps.
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
Am using a VB for auto transpose values to sheet 2 from sheet 1 in MS EXCEL 2007.
What code to add to the already existing VB so that if someone is using the sheet and leaving the cell in E12, for example, and saving it, then the next user should find it again on A3 but not on E12.
I have a workbook for a category of academic journals. It contains the journal name in the first column, the year it was published in the second and various bibliometric stats in the next twelve as follows: ....
Is there a way to get a sound toggle button on excel?
What I need is a button to turn the sound alerts on and off on my spreadsheet. Ideally I'd like a button that either changed an image to the speaker image when on and the speaker image with line through it when off. Is that possible?
If not, is it possible to have a button that just says: "Sound:ON" or "Sound:OFF"?
I guess it could be done with tick boxes, or drop down options.
I have the code below for creating a stopwatch in excel. I was trying to see if there is a way to change this code to assign it to a toggle button so if you hit one part the stopwatch would start and then the other it would stop.
I wanted to know how do I keep a toggle button in the on(ture) position after I close the userform? How do I keep the toggle button off(false) positoin after I close the userform? In order words, once I run my macro again, I want it to remain in memory that my toggle button was in the on(true) or off(false)?
For example,I have an application that I am developing which involves some what-if analysis for some projects. There is a command button located on my worksheet. After the command button is clicked, I have include some toggle buttons on a userform for all of the various projects. If I assume that sine projects will not be used, I click the associated toggle buttons. This puts them in the on(true) position. After I close the userform and reclick the command button, my toggle buttons are all back in the off(false) position.
it's possible to use this macro code in a toggle to perform this action when it's true and when the toggle is click again it can undo it.
This macro does lookups and finds the max on sets of value when it is run and i was wondering if by clicking the button again it can undo what it placed in the cells.
I have a macro that cycles every 5 minutes. I have tried everything I can to get this program to run while I modify a sheet in the workbook to no avail. I have however figured out that if I open up a separate excel application that my macro can continuously run without preventing me from modifying the other application. Now I need to figure out a way toggle between the two excel application windows if a condition is met. The basis of this is to allow production associates to create a schedule and modify it while a macro looks into the defect database and if a defect becomes too problematic, the macro interrupts the schedule to display the issue.