I want to do the following -
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
How to achieve this in Excel 2007 ?
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I need to create a formula that searches the first table and autofills the second based on the teacher name. So when Mr. M is listed in column e, all the data to the right automatically appears on the second sheet.
View 3 Replies View RelatedI have been tasked with creating a workbook that will take a time log file (excel) from an electronic time clock and import the dates/times into individual employee timesheets. The timesheet layout has already been provided to me and cannot change.
I’m really struggling here and would appreciate any help.
Please reference the attached workbook for the issues described below:
1) Sheet "1_attlog" is the log that is imported from the electronic time clock.
2) Sheet "Sorting & Filtering" is what I have developed so far that manipulates the data from sheet "1_attlog" into something that can be easily understood, it also matches employee #'s to a name, and allows for date ranges to be set that copies over to the individual timesheets. Please do not change any formulas on this page if possible.
3) Sheets "#2 Dan through #10 Blank" are all individual employee timesheets that I need to import the data from "Sorting & Filtering" and populate the "Time In" (column D) and "Time Out" (column G) based on matching the data from "Sorting & Filtering" sheet, "Time Clcok ID" (column D) "Date" (column E), "Time In" (column F), "Time Out" (column G), "Emp Name" (column I).
The dates on the individual timesheets have been linked to the "Date Range" (cels F2 & F3) on the "Sorting & Filtering" sheet, please keep this link intact.
4) The individual timesheets already have formulas inplace to calculate the hours worked after the "Time In" and "Time Out" data has been imported.
I have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
View 6 Replies View RelatedHow to fill a web form automatically with excel data. I need to sign up like 300 people on a site per day. Their detail are given to me in excel. How can I automatically fill the form with the excel data without spending time doing copy and paste for each person's data?
View 1 Replies View RelatedI need to auto date every sheet/Tab and can we make Auto date on foot tab? Example: 1st.Apr to 30 Apr on TAB.
View 4 Replies View RelatedI am using the following VBA to auto-name sheets in my workbook based upon what's in cell A2. However, in cell A2 I have the following formula: =B2&" - F&V Expenses". My problem is that I want the sheet to be renamed when I change what's entered into cell B2 and not necessarily what's in cell A2. Is there something I can do to my current VBA that would have it realize that the value in cell A2 really did change because I updated cell B2?
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("A2")) Is Nothing Then
On Error Resume Next
Me.Name = Range("A2").Value
If Err.Number 0 Then
MsgBox "Error in Renaming"
End If
On Error Goto 0
End If
End Sub
I would like to add a makro that will ask, through a pop-up, to name a new sheet.I have the following formula that creates a new sheet and names it BMW and moves it around a little bit:
Code:
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Sheets("Sheet1").Move Before:=Sheets(6)
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "BMW"
But I would like a formula that asks beforehand, through a pop-up, of a preferred name. In this case I will write BMW in the pop-up, and the new sheet will be named BMW.
Using XL2007 on WinXP.
I am trying to auto-populate a table with data looked up from another sheet. The functions I have used are: Data Validation, vlookup, ISerror and if functions.
Cell B4 in sheet2 uses Data Validation to pick data from sheet1 (in this case "tax") and auto populate the table with the information- Job type, Name, employee type and Job title. If i change from Tax to HR, the table should get auto-populated with the correct information.
I have setup vlookups but I am unable to get it working. I am a novice at using vlookups (I learn it just 2 days ago) and am struggling to get it work. I am not even sure if vlookup is the right tool to get this job done.
i want automatically filled data in customers sheet when i enter his name only (in other sheet)
i am using this formula but this gives me empty cell in between when name comes after a few cells
=IF('all people'!A3:A6='all people'!$K$1,'all people'!B3:B6,"")
some one gave me example workbook but that formula is working in the same sheet
and i need it to work in another sheet and i could not do that
download sample work book to understand this formula
I am not able to add a new Excel sheet in a existing file when I right click next to the existing page it gives this option only and I am using Arabic Charcters + I am not having too many sheets
View 1 Replies View Related I have been tasked with overhauling some simple inventory records that are currently being tracked via multiple spreadsheets and in multiple formats over various years. Thus far I have combined the data into two simple sheets (1 & 2) of the same Excel workbook. The first is just the basic listing of current inventory and locations. The second is a record listing various shipments into and out of the company location as a history log. I'm going to be continually trying to clean up the data and make things easier for the staff. The shipping history/log (Sheet 2) contains basic information in columns that include the serial numbers of the items shipped, which correspond to the S/N's in the global list columns within the inventory sheet(1). I would like to find a way to set up where a column in the inventory creates upon click (or have a maco button with the ability to) a popup which will display the history of the current rows serial number. In effect, list all rows in the second sheet with corresponding serial number or as a reverse strategy; filter out the rows that do not have the same S/N listed in one of its columns.
A piece of inventory comes in and is logged into the global inventory sheet (1) with Serial # ks1254. Likewise the shipping sheet (2) has the shipping information and document info logged with the same serial # listed. This is item has arrived and been shipped out multiple times, and occasionally the history of this item is requested. I have a column set aside in sheet 1, that i would like to act as a trigger for the above request. So if I filter and find the mention item, I would like the trigger to go and select out only the rows in sheet 2 that correspond to the S/N of the item in question. This can be presented as a pop up tab, a small window, even as a new sheet altogether I suppose. I guess I'm using Excel 2007, have a very dated limited VB skill set, so just hoping for some direction and steps.
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
View 6 Replies View RelatedI am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
Code:
Worksheets("Lookup").Select
Range(n & lngRevStart & ":" & n + 1 & lngEndRow).Select
Selection.Copy
Worksheets(strDeptSheet).Select
Range(Columns(o), Rows(m)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
Am using a VB for auto transpose values to sheet 2 from sheet 1 in MS EXCEL 2007.
What code to add to the already existing VB so that if someone is using the sheet and leaving the cell in E12, for example, and saving it, then the next user should find it again on A3 but not on E12.
The sheet should always open on A3..
I've only recently began to use excel, but I've really dived deep into it, I'm clueless when it comes to VBA but now I'm stepping into that realm. Anyway, I'm using this code....
Code:
Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("A:A")) Is Nothing Then
Application.EnableEvents = False
Me.Sort.SortFields.Clear
Me.Sort.SortFields.Add Key:=Range("A:A"), SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With Me.Sort
[Code].....
Code:
Credits to VOG
Link: auto-sort for excel 2010.... to auto sort 2 columns of data. However, it is extremely tedious to enter data as it sorts itself every time you enter a new data point. Moreover, using any random number generator to fill the columns takes ages! Is there anyway to make it so the code only runs when the worksheet is refreshed (F9 pressed.)
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies View RelatedI'm working with a very large spreadsheet which has somehow divided itself into print areas. Each section has 'Page 1' or the equivalent as a background, behind the data itself. I thought it would be simple to remove this, but for the life of me I can't see how. I'm using Excel 2007.
View 6 Replies View RelatedI am importing data into an Excel 2007 worksheet from an online form. They are answers to 30 questions for up to 250 respondents. I was expecting to import one row of data for each respondent however the data is importing in a step like manner as below
Q1Q2Q3
AF169856 Y
AF169856N
AF169856N
AF145723 N
AF145723Y
AF145723N
Any formula/solution to bring all of these responses into one line for each respondent ?
My set up office 2007 win xp pro ie8
is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format
Then I would like to be able to do the reverse load a CSV file back in to a work sheet
Expanding upon this
1. Click a command button with caption “save”
2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on
3. Click another command button with the caption “load” interact with usual dialog box.
My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV
The reason this is required is to mate up with the php on the server side
Excel 2007 I have 80 very similar sheets. The only difference is the sheet name (Phase A (1), Phase A (2) etc.). I want the formula located in cell B5 to be different on every sheet.
I have listed the desired formulas on a single seperate worksheet, named "Overview". On this sheet, the following columns have these data in them:
A - Sheetname (example: Phase A (1), Phase A (2) etc.)
B - Cell location (example B5, constant)
C - A formula (example: =Sheet1!G47, =Sheet1!G48, etc.)
I would like to create a macro that will loop through all the sheets, doing the following:
1. Check if the sheetname exists in column A of the Overview sheet
2. If it does, take the formula from column C of the Overview sheet
3. And put it in the cell specified in column B of the Overview sheet
Here is some code, to illustrate the above. I know the code is mostly nonsensical.
Code:
Sub Enter_formulas()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
[Code]....
I can run this code successfully:
Code:
With ActiveSheet.ChartObjects("Chart 2").Chart
.Axes(xlCategory).TickLabels.Font.Size = 20
End With
But this code throws a "This Object Is No Longer Valid" error when it gets to the first .Axes line:
Code:
Sub ChartFormat()
'
' Format Charts macro
'
Dim ch As ChartObject
For Each ch In ActiveWorkbook.Sheets("Summary").ChartObjects
With ch.Chart
.Axes(xlCategory).TickLabels.Font.Size = 16
[Code] .......
I'm using Excel 2007.
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View 2 Replies View RelatedI want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation.
In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
I have spread sheet and values in some columns have highlighted in color.What I have to do is I need to quickly separate the highlighted data and put in the other spreadsheet.
View 5 Replies View RelatedI need to select and filter all highlighted data quickly in excel 2007.
View 1 Replies View RelatedExcel (2007) user however I'm not very well versed with VBAs and Macros.
I have three sheets and on each sheet the first 5 columns (A - E) have the same title (all in row 1, frozen top row and with filters) there are other columns but I only need A -E to auto transfer.
Sheet 1 is named "Total"
Sheet 2 is named "Management Referral"
Sheet 3 is named "Health Assessments"
What I'd like is for any entry that goes into any row in both sheet 2 and 3 to automatically transfer to sheet 1, but only the information from columns A - E.
There will be dates (dd/mm/yyyy) in column A in each sheet and when transferred to sheet 1 they must be listed chronologically oldest to newest.
I also need all the information in columns A - E that transfer to sheet 1 to stay in their respective sheets.