Excel 2007 :: Popup That Ask For Name For New Sheet?
Sep 19, 2012
I would like to add a makro that will ask, through a pop-up, to name a new sheet.I have the following formula that creates a new sheet and names it BMW and moves it around a little bit:
Code:
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Sheets("Sheet1").Move Before:=Sheets(6)
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "BMW"
But I would like a formula that asks beforehand, through a pop-up, of a preferred name. In this case I will write BMW in the pop-up, and the new sheet will be named BMW.
Using XL2007 on WinXP.
View 4 Replies
ADVERTISEMENT
Apr 22, 2013
I have been tasked with overhauling some simple inventory records that are currently being tracked via multiple spreadsheets and in multiple formats over various years. Thus far I have combined the data into two simple sheets (1 & 2) of the same Excel workbook. The first is just the basic listing of current inventory and locations. The second is a record listing various shipments into and out of the company location as a history log. I'm going to be continually trying to clean up the data and make things easier for the staff. The shipping history/log (Sheet 2) contains basic information in columns that include the serial numbers of the items shipped, which correspond to the S/N's in the global list columns within the inventory sheet(1). I would like to find a way to set up where a column in the inventory creates upon click (or have a maco button with the ability to) a popup which will display the history of the current rows serial number. In effect, list all rows in the second sheet with corresponding serial number or as a reverse strategy; filter out the rows that do not have the same S/N listed in one of its columns.
A piece of inventory comes in and is logged into the global inventory sheet (1) with Serial # ks1254. Likewise the shipping sheet (2) has the shipping information and document info logged with the same serial # listed. This is item has arrived and been shipped out multiple times, and occasionally the history of this item is requested. I have a column set aside in sheet 1, that i would like to act as a trigger for the above request. So if I filter and find the mention item, I would like the trigger to go and select out only the rows in sheet 2 that correspond to the S/N of the item in question. This can be presented as a pop up tab, a small window, even as a new sheet altogether I suppose. I guess I'm using Excel 2007, have a very dated limited VB skill set, so just hoping for some direction and steps.
View 1 Replies
View Related
Apr 12, 2013
I'm trying to create a popup message that appears when a given worksheet is activated. I can't figure out the syntax to get it right.
View 3 Replies
View Related
Jun 5, 2014
My query is,How to get any type of remainder from my excel sheet/workbook on my desktop.
View 2 Replies
View Related
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
Feb 9, 2012
I want to do the following -
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
How to achieve this in Excel 2007 ?
View 1 Replies
View Related
Jul 15, 2013
I am not able to add a new Excel sheet in a existing file when I right click next to the existing page it gives this option only and I am using Arabic Charcters + I am not having too many sheets
View 1 Replies
View Related
Jan 13, 2009
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
View 6 Replies
View Related
May 22, 2012
I am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
Code:
Worksheets("Lookup").Select
Range(n & lngRevStart & ":" & n + 1 & lngEndRow).Select
Selection.Copy
Worksheets(strDeptSheet).Select
Range(Columns(o), Rows(m)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
View 1 Replies
View Related
Feb 2, 2014
Am using a VB for auto transpose values to sheet 2 from sheet 1 in MS EXCEL 2007.
What code to add to the already existing VB so that if someone is using the sheet and leaving the cell in E12, for example, and saving it, then the next user should find it again on A3 but not on E12.
The sheet should always open on A3..
View 4 Replies
View Related
Oct 29, 2013
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
View 3 Replies
View Related
Dec 18, 2013
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies
View Related
Apr 6, 2010
I'm working with a very large spreadsheet which has somehow divided itself into print areas. Each section has 'Page 1' or the equivalent as a background, behind the data itself. I thought it would be simple to remove this, but for the life of me I can't see how. I'm using Excel 2007.
View 6 Replies
View Related
Oct 7, 2011
I am importing data into an Excel 2007 worksheet from an online form. They are answers to 30 questions for up to 250 respondents. I was expecting to import one row of data for each respondent however the data is importing in a step like manner as below
Q1Q2Q3
AF169856 Y
AF169856N
AF169856N
AF145723 N
AF145723Y
AF145723N
Any formula/solution to bring all of these responses into one line for each respondent ?
View 1 Replies
View Related
Dec 21, 2011
My set up office 2007 win xp pro ie8
is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format
Then I would like to be able to do the reverse load a CSV file back in to a work sheet
Expanding upon this
1. Click a command button with caption “save”
2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on
3. Click another command button with the caption “load” interact with usual dialog box.
My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV
The reason this is required is to mate up with the php on the server side
View 3 Replies
View Related
Jun 1, 2012
Excel 2007 I have 80 very similar sheets. The only difference is the sheet name (Phase A (1), Phase A (2) etc.). I want the formula located in cell B5 to be different on every sheet.
I have listed the desired formulas on a single seperate worksheet, named "Overview". On this sheet, the following columns have these data in them:
A - Sheetname (example: Phase A (1), Phase A (2) etc.)
B - Cell location (example B5, constant)
C - A formula (example: =Sheet1!G47, =Sheet1!G48, etc.)
I would like to create a macro that will loop through all the sheets, doing the following:
1. Check if the sheetname exists in column A of the Overview sheet
2. If it does, take the formula from column C of the Overview sheet
3. And put it in the cell specified in column B of the Overview sheet
Here is some code, to illustrate the above. I know the code is mostly nonsensical.
Code:
Sub Enter_formulas()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
[Code]....
View 2 Replies
View Related
Apr 21, 2014
I can run this code successfully:
Code:
With ActiveSheet.ChartObjects("Chart 2").Chart
.Axes(xlCategory).TickLabels.Font.Size = 20
End With
But this code throws a "This Object Is No Longer Valid" error when it gets to the first .Axes line:
Code:
Sub ChartFormat()
'
' Format Charts macro
'
Dim ch As ChartObject
For Each ch In ActiveWorkbook.Sheets("Summary").ChartObjects
With ch.Chart
.Axes(xlCategory).TickLabels.Font.Size = 16
[Code] .......
I'm using Excel 2007.
View 1 Replies
View Related
Jan 7, 2014
I have spread sheet and values in some columns have highlighted in color.What I have to do is I need to quickly separate the highlighted data and put in the other spreadsheet.
View 5 Replies
View Related
Jan 7, 2014
I need to select and filter all highlighted data quickly in excel 2007.
View 1 Replies
View Related
Aug 18, 2014
Excel (2007) user however I'm not very well versed with VBAs and Macros.
I have three sheets and on each sheet the first 5 columns (A - E) have the same title (all in row 1, frozen top row and with filters) there are other columns but I only need A -E to auto transfer.
Sheet 1 is named "Total"
Sheet 2 is named "Management Referral"
Sheet 3 is named "Health Assessments"
What I'd like is for any entry that goes into any row in both sheet 2 and 3 to automatically transfer to sheet 1, but only the information from columns A - E.
There will be dates (dd/mm/yyyy) in column A in each sheet and when transferred to sheet 1 they must be listed chronologically oldest to newest.
I also need all the information in columns A - E that transfer to sheet 1 to stay in their respective sheets.
View 3 Replies
View Related
Feb 20, 2014
How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.
And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007
View 14 Replies
View Related
Apr 18, 2010
I have the office 2007 Suite.I have a small business, where i sell online mostly. I'm creating a simple spreadsheet using Excel 2007, a workbook that has simple financial statements.
I'm creating a list of customers along with what they order, what they paid, how they paid, (paypal, cheque) etc, The first column is the invoice number, and each is unique to each customer. I add as i get orders. so my list of invoices has the following fields as column headers
Quote:
Invoice Number Customer Name, Paid by Paypal, Paid by Cheque, Amount, Cusotmer email, Customer address, There are more and i won't list them all. Now each time i send an order, i have to fill in the excel worksheet. I then create the invoice separately in Word 2007 which i print to send to the customer with the order in the mail. The third step is sending an email to the customer upon despatch, using Outlook 2007.
I don't want to use accounting software as that is too complicated for my simple little business. What i do want to do however is combine all three tasks instead of having to open different programs and copying and pasting between them. I'd like to be able to add the data to Excel either using a form (ideally) or direct, then i'd like to be able to click on the "customer email" field to send a confirmation email to the customer, and also to be able to have an automated invoice, either in excel or Word, which draws the information automatically for each invoice, so that i only have to print it.
At the moment i'm doing all 3 tasks separately, when i know they can be automated.
1. I have about 20 columns of data for each invoice, ideally i'd like to be able to enter them from a form as it gets cumbersome going through them all in Excel. The form could be either in Word or Excel, which would be easier?
2. Using the invoice number as the unique field, how can i create an invoice that would draw out the required fields from the Excel data automatically, just by clicking a button? I dont' mind using either Excel or Word, whichever is easier, and i do have Access too, but i don't know if i should use that, or not. I don't need to draw any other data. I only want to print invoices and send confirmation emails.
3. After printing the invoice and posting the order to the customer i sent them an email confirming. Again i have to manually enter or copy and paste data in the email, which i know could be automated, if i create a template, and have some fields that are automaitcally populated using the fields in the date already entered.
These fields ususally include the total paid, currency paid, address, name and how many ordered. All of this could be automated, but i'm not sure how to do it.
View 9 Replies
View Related
Feb 13, 2012
I am using excell 2007 and 2010
I need to find the average numbers on sheet 1 column D. Column D contains numbers as well as Blank cells. The info will be presented on sheet 2 in a monthly view. In other words i need to ssearch awithin a date range and determin the average of those numbers. This works on some months but return a DIV/0 erro most of the time.
=AVERAGEIFS('2N Stats'!$I:$I,'2N Stats'!$E:$E,">=2/1/2011",'2N Stats'!$E:$E,"
View 2 Replies
View Related
Apr 26, 2012
I am using Excel 2007. When I pulled up a workbook today with 3 sheets in it, all that comes up is the first sheet and the sheet tabs at the bottom of the screen are no longer there. I must have accidentlly pushed some button, but I can't get to the other sheets. I really need the information on the other sheets. How do I restore the view that shows the sheet numbers at the bottom?
View 2 Replies
View Related
Jul 17, 2012
I've seen some examples here and I think I understand the consolidation function. However, my query has the added level of needing to consolidate each member:
I have a table of data that looks like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
1986.4805
[Code] .........
There are a number of clients that have multiple investments that are shown by an alpha numeric code. I need to consolidate the number of units for each member in to one line. Ideally the output would look like this:
SURNAME
NINO
CODE
NO OF UNITS
Smith
AB123456C
8AIA
2278.4058
[Code] ...........
View 9 Replies
View Related
Nov 10, 2012
i am totally new in excel and i am using excel 2007, my question is : how can i create an object in an excel sheet, so that when the mouse cursor move to it, it pops up anohter image?
View 4 Replies
View Related
Dec 11, 2012
I am using excel 2007
I am attempting to put a drop down list using "Data Validation". I can get it working when my list is on the same sheet (sheet 1) and the column of cells I want the drop down list to show up in....(you know..when the drop down list shows up in each individual cell)......BUT...when I put the list on another sheet (sheet 2) and try to do the "Data Validation" back on sheet 1, excel won't let me go highlight the list on sheet 2.
I even tried writing sheet2 and the range and that still doesnt work.
View 1 Replies
View Related
Nov 7, 2013
I use the following formula in excel 2007 (and it's working perfectly in 2007) but this formula does not work if I work with the same file in excel 2003 ...w why and what I have to adjust?
=IF(SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B))=0;"not found";INDEX('sheet 2'!D:D;SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B));1))
(I'm working with the dutch excel version so it might be that ";" must be ",")
View 6 Replies
View Related
Jan 30, 2014
I am using Excel 2007 and I have a worksheet with multiple columns, some of these columns are protected and some are not.
I then lock the worksheet with a password so the user can't edit certain cells that are protected but can modify the unprotected cells, the problem is the user cannot use the filter or sort the workbook.
Is there a way to allow filtering or sorting but still lock down the worksheet.
View 3 Replies
View Related
Aug 21, 2007
I have a workbook containing multiple sheets of data. I have a macro to analyze this data but want to add a popup menu with a dropdown list of all sheets in the workbook. The idea is to have the macro prompt me to select which sheet to continue running on. I can't remember how to create an input box with a dropdown menu.
View 8 Replies
View Related
