Am using a VB for auto transpose values to sheet 2 from sheet 1 in MS EXCEL 2007.
What code to add to the already existing VB so that if someone is using the sheet and leaving the cell in E12, for example, and saving it, then the next user should find it again on A3 but not on E12.
The sheet should always open on A3..
when I open my sheet on another computer, all cell value which contain formula show no value. just blank. formula is link to same workbook on different tab. when I save as again on my desktop, all value appears. excel 2007 is using.
View 3 Replies View RelatedI have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies View Relatedhow to copy data from one workbook to another workbook.
here's the process
1. Button upload is in book1 sheet 1
2. Copy data from book to book 1 sheet 2
Here's my code for starters.
[Code] ....
How to export data like name and percentage from all the sheet (30 sheets) to a new file or in a different sheet.
E.g
Name project target ,weekly %, and monthly percent% ,present, absent are there in all sheet but i want to export only Name and monthly percentage to different excel or different sheet in same excel.
I am using Excel 2007 on Windows XP professional.
The workbook is called EA.xlsm, and contains dozens of charts, tables and pivot tables - all of which pull their data from external files in the same folder. In case it matters, the folder also contains a Word 2007 document which contains embedded charts form the EA.xlsm file and lays them out for printing.
My problem is that all of a sudden, when I try to open the EA.xlsm file, it gives me two consecutive error messages, as follows:
Microsoft Office has identified a potential security concern.
File path: c:My DocumentsEA.xlsm
Data connections have been blocked. If you choose to enable data connections, your computer may no longer be secure. Do not enable the content unless you trust the source of the file. [Enable] / [Disable]
to which I click enable, and then....
Microsoft Office has identified a potnetial security concern.
File path: c:My DocumentsEA.xlsm
Automatic update of links has been disabled. If you choose to enable automatic update of links, your computer may no longer be secure. Do not enable the content unless you trust the source of the file. [Enable] / [Disable]
to which I also click enable.
Excel then opens, but I just get the program with a blue screen. i.e. it looks like you have opened Excel, but not opened a file yet. However, if I try to close Excel, it asks me if I want to save changes to EA.xlsm, and if I try to open EA.xlsm again - it tells me that it is already open. Also, if I press Alt+F11 to open the VBA console - I can see the names of all of the sheet tabs in the file - but when I close the VBA console, it looks as though I do not have a file open again.
I suspect that somehow, somewhere the file is open, but I dont know what I need to do to be able to see/edit it. Or even worse - if it has become corrupt. It would take me about a month to put this file back together again from scratch.
I have 2 Worksheets in an Excel 2010 Workbook -
Sheet1
Column1: contains the word "dog"
Column2: contains the word "bark"
Sheet2
Column1: contains the sentence "I like dogs a lot."
Column2: is blank
What I need to do is search Sheet2/Column1 for the presence of "dog" and if it's present, populate the word "bark" in Sheet2/Column2 from Sheet1/Column2.
How can I do this?
Assume I open with Excel 2007 three different Excel workbooks
excel1.xls
excel2.xls
excel3.xls
How can I switch from one Workbook to another?
I found no "open document" menu where all currently opened excel documents are listed.
The only way I found so far is by clicking on another preview in Win 7 Taskbar.
But I guess there must be a way INSIDE Excel as well.
Where can I find (and click) all open excel workbooks/files?
I run two monitors and am able to open different files on each monitor which is very handy.
This doesn't seem to work with Excel. If I have two different Excel files open I can only view one at a time. I can move across to the other monitor, but then can only view one at a time on that monitor - very frustrating.
When I was using Excel 2010 on my last job I was shown a clunky, round-about way of being able to open two Excel files, one on each monitor. (By opening one file, opening a new Excel document from there, and then opening the other Excel file from the new document, minimizing that file and dragging it to the other screen).
Now I am using Excel 2007 and am not able to view two different Excel files, one on each screen. how I can do this in Excel 2007?
Is there a way to Open or Import a PDF file in Excel 07 ?
View 2 Replies View RelatedI received a USB drive from a client with an Excel spreadsheet with hyperlinks to PDF's (not sure of the version it was originally created in but my version is 2007). The PDF's are in another folder on the USB drive.
The cells with the hyperlinks have a formula to hidden cells [i.e. =HYPERLINK(C17,B17)] - in column B is the name of the hyperlink and in column C looks to be the file trial to the PDF (please see attached picture).
When I select the link, I get an Alert Box stating, "Cannot open the specified file." How I can get these links to work?
Excel Hyperlinks.png
Had to rebuild my PC's hard disk and reinstall software. Now, whenever I open another workbook via explorer double click, a new instance of Excel starts. If I open another workbook using Excel's menu open, then the workbook opens in the same instance. I've tried a 'Repair' of Office and resetting the default programs to Excel for all Excel related file extension types.
View 5 Replies View RelatedI have a spread sheet that I have written that has 2 html links in it. The links work, but they only open in one browser tab. How do I get them to open in different tabs? Opening in two different browser sessions would be acceptable too. I have Excel 2007 and IE 9 but the users may have different versions.
View 7 Replies View RelatedI have been opening files from another application which opens the files in memory as .XLS. I have not saved these to my PC. Is there VBA to merge all open .XLS files into another Workbook - preferably .XLSX.
View 1 Replies View RelatedI have Excel 2007
Every time I start up excel whether it's opening a new spreadsheet or an existing one it tries to open one that I had deleted a while ago. I have nothing in my xlstartup files and I have thoroughly searched all files around it, before it, after it, and all in between. I went to Excel Options>Advanced>General and there is nothing in the field where it says "At startup open all files in:"
It seems to be trying to open the file from my desktop.
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
I have the following code below for a timer in a userform. Right now it is configured to start when a button is clicked. I would like to have it automatically start the timer after the workbook is open for more than 5 minutes but so far have been unable to get it to do so. I have tried putting the code in the workbook module but it still won't run. It also has a button to reset the timer if they need more time in the workbook and also a button for them to save and close the workbook if they are finished. I'm running Excel 2007.
VB:
Private Sub CBReset_Click()
Dim T, E, M As Double, S As Double
T = Timer
Do
E = CDbl(Time) * 24 * 60 * 60 - T 'elapsed time in secs
M = AllowedTime - 1 - Int(E / 60)
S = 59 - Round((E / 60 - Int(E / 60)) * 60, 0)
[Code] .....
I have a macro that opens all workbooks from one directory and runs a macro for each workbook to clean up the data. I cannot figure out how to take all those open workbooks and save them to another directory and close the workbook. Also, I do not want the macro workbook (xlsm) to save. I only want it to close. I am working in 2007 Excel.
View 8 Replies View RelatedIts been a while since I did this on 2003 and needing a pointer on 2007.
Just needing a simple macro that opens the relevant folder from a hardcoded path to allow the user to manually select the file to be used.
This file will then be used to copy from and paste to another file.
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I want to do the following -
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
How to achieve this in Excel 2007 ?
I would like to add a makro that will ask, through a pop-up, to name a new sheet.I have the following formula that creates a new sheet and names it BMW and moves it around a little bit:
Code:
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet1").Select
Sheets("Sheet1").Move Before:=Sheets(6)
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "BMW"
But I would like a formula that asks beforehand, through a pop-up, of a preferred name. In this case I will write BMW in the pop-up, and the new sheet will be named BMW.
Using XL2007 on WinXP.
I have this workbook in which each sheet refers to a month in a specific year (e.g. Jan12, Nov13), plus an "overall" sheet where I would like to, among other stuff, create a button that would lead me to the sheet refering to "today's month".
Although I know how to create a "static" macro that leads me to a particular sheet, I don't know how to create one in which the sheet it refers to is changing every single month.
(Note: I'm using Win7, MSExcel 2010)
my sheet tabs sometimes disappears when I open excel. I know you can go through the start button and the advanced option to display the sheet tabs. Is there code I can incorporate so that on the opening of the excel file after the splash screen runs its course, the sheet tabs are displayed.
View 9 Replies View RelatedI am not able to add a new Excel sheet in a existing file when I right click next to the existing page it gives this option only and I am using Arabic Charcters + I am not having too many sheets
View 1 Replies View Related I have been tasked with overhauling some simple inventory records that are currently being tracked via multiple spreadsheets and in multiple formats over various years. Thus far I have combined the data into two simple sheets (1 & 2) of the same Excel workbook. The first is just the basic listing of current inventory and locations. The second is a record listing various shipments into and out of the company location as a history log. I'm going to be continually trying to clean up the data and make things easier for the staff. The shipping history/log (Sheet 2) contains basic information in columns that include the serial numbers of the items shipped, which correspond to the S/N's in the global list columns within the inventory sheet(1). I would like to find a way to set up where a column in the inventory creates upon click (or have a maco button with the ability to) a popup which will display the history of the current rows serial number. In effect, list all rows in the second sheet with corresponding serial number or as a reverse strategy; filter out the rows that do not have the same S/N listed in one of its columns.
A piece of inventory comes in and is logged into the global inventory sheet (1) with Serial # ks1254. Likewise the shipping sheet (2) has the shipping information and document info logged with the same serial # listed. This is item has arrived and been shipped out multiple times, and occasionally the history of this item is requested. I have a column set aside in sheet 1, that i would like to act as a trigger for the above request. So if I filter and find the mention item, I would like the trigger to go and select out only the rows in sheet 2 that correspond to the S/N of the item in question. This can be presented as a pop up tab, a small window, even as a new sheet altogether I suppose. I guess I'm using Excel 2007, have a very dated limited VB skill set, so just hoping for some direction and steps.
I am using excel 2007 and when I right click on the worksheet tab, delete is greyed out. My workbook/sheet is not shared. I also had the problem owith row and columns. CommandBars("row").Reset sorted that out but I can't seem to sot out the tab issue.
View 6 Replies View RelatedI am trying to copy two columns to a different sheet in vba code. I will ultimately need to do this multiple times but I think I have the iteration part ok, it's just the copy part that seems to be wrong.
Code:
Worksheets("Lookup").Select
Range(n & lngRevStart & ":" & n + 1 & lngEndRow).Select
Selection.Copy
Worksheets(strDeptSheet).Select
Range(Columns(o), Rows(m)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
The original code I used for this works great on one column but I knew the letter column each time I used it. Now I am trying to get two columns at a time and will be iterating through several based on user selections. I figure that will be faster to do both columns as the two columns are side by side.
I am getting an error on the PasteSpectial line "Run-time error '1004' PasteSpecail method of Range class failed.
I'm not sure where to go with this but I am assuming I have a problem with the Range selection lines on either the source or destination or both. The support is just for Macro errors.
I have a file that has an original file format .xls
I saved as .xlsx (I am using Excel 2007) with a different name so I could make changes to the new file without changing the original.
That turn off compatibility mode.... but it is still "shared". While it is shared I cannot delete a sheet. In fact, I really don't even want it to be shared. If the file is open, and someone else opens it, I want it to open as "read only". I cannot uncheck the "Allow changes by more than one user at the same time. This also allows workbook merging." checkbox because it is greyed out.
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies View Related