I have a workbook for a category of academic journals. It contains the journal name in the first column, the year it was published in the second and various bibliometric stats in the next twelve as follows: ....
View 9 RepliesI was wondering how to input data on one sheet, then have specifics from that first sheet get sorted and put on the second and third sheet according to it's value. I have attached an example with my comments in red.
View 3 Replies View RelatedI am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
The senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
Start Date: 1/1/08
End Date: 1/1/08
Users: 100
Description: ...whatever
What I want to do is pull just the end dates into the next column. Is there an easy way to do this or do I need to build a macro?
I have a huge listed of assets - the column i where my info is has vasrious serial numbers.... some are a simple string of letters/numbers and the others look like this for example AG-1234567
I need to somehow pull out the ones that look like that. (AG-1234567). I only need those. Now normally i would just do a filter and pull em out however, this sheet contains 73k worth of items.
what would be the formula to perform such a task?
I have this spreadsheet where in there's a Raw Data. Along with is there's a different tab for different user, is there a way that if a certain user choose a date it will pull up the data for that date in the Raw Data.
What formula should I use? and how should I do it.
I have random comments in a column of cells of which I'm searching for a specific string of characters that may be contained in each cell. I want to pull 2 pieces of data from this specific string and place the data in 2 other cells in the same row.
Sample comments in cell 'N1':
..... blah, Appt: Friday; 12/4; night drop off. blah, blah....
Sample comments in cell 'N2' (and so on and so on):
.....blah, blah, Appt: Thurs; 12/3; 12:30PM. blah, ....
The specific string in the above examples will always begin with:
APPT:
Then the key elements found directly after the 'APPT:' are:
Thurs; 12/3; 12:30PM.
(which are the)
DAY; DATE; TIME.
These elements will be always separated by the semi-colon ';' and the string will always end with the period '.'
I need a pair of formulas to be in col 'J' & 'K' to extract the DATE and place it in column 'J' and the TIME and place in column 'K', both in each same rows.
So, from the 2 above samples I would need the following:
in Cells:
J1 - 12/4 ....... K1 - night drop off
J2 - 12/3 ....... K2 - 12:30PM
I've been trying to come up with a formula using a combination of FIND() & MID(),
My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.
View 6 Replies View RelatedI use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I want to create 3 command buttons (active X) on a worksheet to toggle between showing rows which only contain the below text in column L (range L9:L30) and showing all rows containg the options (However, I also have some blank rows in this range and i always want them to remain hidden.)
My text options are:
High ‚
Medium ՠҪ
Low ’á
The text arrives in the cells via a VLOOKUP
Is the chinese text a problem? i can't type it into VB.
I've been using the following macro to hide and unhide rows with a command button in the same sheet:
Private Sub CommandButton1_Click()
Toggle_Hide_Unhide
End Sub
Sub Toggle_Hide_Unhide()
Dim rngCell As Range
Dim TakeAction As Boolean
If ActiveSheet.CommandButton1.Caption = "Hide" Then
TakeAction = True
ActiveSheet.CommandButton1.Caption = "UnHide"
Else
TakeAction = False
ActiveSheet.CommandButton1.Caption = "Hide"
End If
For Each rngCell In ActiveSheet.Range("I9:I30")
With rngCell
If .Value = 2 Then .EntireRow.Hidden = TakeAction
End With
Next rngCell
End Sub
I've got a bit of a quandary here that my novice programming skills can't seem to solve.
Here is the scenario. I work for a photographic library. We have a spreadsheet that contains 5 or so columns, and a couple of thousand rows. Essentially each row contains an imagine code (the number we use to file away the imagine, ie. US_NY_NYC_1 ) in the first cell, and the image information in the following cells (ie metadata, keywords, photographer, date, etc).
so a typical row would look as follows:
Filename | Keywords | Photographer | Metadata | Location |
all the keyword, photographer, metadata, and location information can only be tied to the one image code whose cell begins the row.
Now, here is my dilemma. This sheet (lets call it the master sheet) contains all the images we have in a given batch. However, when a client orders images, we will send them most images in that batch, but not all, and we may send a few additional. So I have a separate sheet that contains only those image codes that the client requested. What I need to do is essentially take a code from the second sheet, find that same code in the master sheet, and copy over all the cells associated with that code's row. If the number does not exist in the master sheet, simply leave that row with only the code in the first cell, and the rest blank, and move on.
so for example, in my second sheet lets say I have the following A_B_C . I would like for excel to find that same code in the master sheet, and then copy over the metadata, photographer, date, etc, associated with that code, and paste it into the second sheet, so that that row in the second sheet now looks identical to the row with the same image code in the master sheet . If A_B_C does not exist in the master spreadsheet, then I would like excel to simply leave that code in its own row, leave the rest of the row blank, and move on to the next code.
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
I have a workbook with 50 sheets. Within each sheet are rows of text that I need to search for specific text.
I'd like to search each row from each sheet for specific words (e.g. "7 days") then show the resulting rows data/text in a new sheet along with the name of the sheet and row number it came from.
e.g.
Sheet 1 contains the text "7 Days" on line 40
Sheet 2 contains the text "7 Days" on line 1, 30, 50
In a new sheet, I would show the entire row in its own row that contains the text "7 Days" along with the name of the sheet and row number it was found in
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Code below
Sub deleterows()
Dim i As Integer
Dim intCounter As Integer
Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
[Code] ..........
This formula returns the count of all rows in Sheet1 that have Donation in the first 1000 rows of Column G AND Student in Column T.
=SUM((Sheet1!$G$1:$G$1000"Donation")*(Sheet1!$T$1:$T$1000="Student Time"))
I need to do the exact same thing but instead of looking for the word Student as the value of the cell, I need to count the cells that have the words "Student Time" somewhere in the cells in Column T. These cells also contain lots of other text including sometimes carriage returns.
I have created my main spreadsheet in a form format - one form per student in a row downwards (30 students) and then a row for each of 4 terms.
On a separate sheet I want to pull particular entries. I have done this for Term 1 and can continue and do Terms 2 - 4. However, I have to wonder if there is not an easier way. If not, then I'm good to continue - just takes a couple of hours to create the second sheet section for each term.
I have a master document that I want to break apart into sections. How can I pull data from the Master document (sheet1) to sheet 2 without having to make changes to both parts?
If this is hard to understand I will try to explain better....I have addresses on the first page and want to make a separate group from that original document on sheet2. My main goal is to be able to only update the first sheet and to have the changes go on to the sheet2 document.
I have a workbook populated with values in 3 columns. The values of the second column group rows into larger segments. I want to pull one row for each different value onto a different sheet.
example:
1. apple
2. apple
3. apple
4. apple
How do I only pull one row of apples onto another sheet without copying by hand? I have attached an live example. I want to pull one row for each classification (column 2) named on the sheet without copy/pasting each one.
I have two sheets....one sheet has a all the detail I need on it. On the second sheet I am trying to pull all the detail by category but want to eliminate any zeros in between. Anyone know how to do this?
I feel like I am being very vague so if I need to give more detail just let me know.
I don't think this may even be possible, but what I am trying to do is pull only certain information from one worksheet to another based on whether there are entries on certain dates for employees.
A sample is attached.
On the first worksheet I have a drop down menu for all employees on the second sheet. (the drop down menu pulls the names from the second sheet)
The second worksheet has all employees in Column A and to the right has all their variances by date. Most dates will be blank as they didn't have a variance.
What I would like is on the first worksheet, is to select their name from the drop down menu and have all the dates that they had variances and the variances show up.
If you take a look at the attached excel file it might explain what I am trying to do better.
I'm building a personal budget that looks a lot like a set of business financials (really just an exercise to learn excel techniques).
So, I have one sheet that acts as a register -- in column A I have the date of the transaction, column B is the amount, C is from which account the money came, D is the use of the money, and E is a code (1 for paycheck, 2 for investment income, 3 for food expense...etc).
On another sheet I have an income statement. I want the income statement to pull code 1s from the register sheet for the month indicated by column A in that sheet into the proper month column (B is january, C is Feb....). I then have a cash flow sheet which uses V-lookups to pull the information from the income statement, and that seems to work fine.
Right now, it pulls a sheet from another workbook, and saves it to this workbook. It works great. My problem is that I want it to keep what it pulls in, and not change when the other workbook changes. The other workbook has a macro that clears its cells every morning, so new info can be entered.
I want the old info that the code below pulled over to stay the same, so that I can keep a running history of what was entered everyday. At the moment, if I run the clear cells macro in the other workbook, it also clears all in this workbook. What needs changed in the code to make it work right?
SampleEOD.xlsm
I've attached a workbook with a description of what I'm trying to do. I'm not sure if it can be done with formulas or if it will require VBA. I can move it to the VBA section if the latter terms out to be the case. it's not that I'm opposed to copying code, I just like to know how it works with enough depth that I can fix/modify it, and I can't do that with VBA).
View 6 Replies View RelatedI have a workbook with multiple tabs, each tab is representative of a person and their ongoing project list. What I am trying to do is to be able to pull rows from each tab identifying the persons active projects based on an assigned due date.
Details: Tabs for Tom/Susan/Phil/Jerry each person will be updating their own sheet with project completion details. Each tab has similar headers with a corresponding due date or completion date. On the master sheet I would like to pull those rows that correspond to the specific dates for all persons.
Example - give me all rows that reflect projects due on 1/21/2014.
Expand the explanation for the previous thread? [URL]....
I am trying to do basically the same thing, I have a long list of clients and need to separate them by date they contacted us. I am using Excel 2008 on a mac, which does not allow micros. the previous thread does exactly what i need to do, but i cant get it to work.
I am working on a project for a monthly report. My back sheets have (or will have) 12 columns of info for monthly income/expense for multiple companies. The front sheet will have 2 columns, one for the past month & one for cumulative.
Obviously the cumulative is an easy one to pull off, but how can I make the correct column show up for the current (last) month I am working on.
Rather than make it tied to the actual date of input, I have used an approach in the past with a "sum if" formula for a single reference where =sum if(b6:b6,a2,a6:a6) but I'm not sure how to make it work for 12 references. Can this be done?
I have a file which has a number of sheets each relating to a different project. Each project has a line for each milestone starting at the same row but each project has a different number of milestones.
I would like to create a summary sheet that either pulls through each row relating to a milestone from each project sheet or ideally each milestone that relates to a certain month from each project sheet (each milestone includes a completion date).
Basically, I run a DJ Management company, arranging bookings for 6 artists. What I'm trying to do, is have data be auto populated from the Master sheet, into separate sheets. The aim, is to create 1 master with ALL the dates for the month in, and the each of the separate sheets to only populate data relating to that artist.
For example!
Artist
Event
Location
Fee
Date
Tony
Tomorrowland
Boom, Belgium
5,000
01/05
[code]....
Now, I need to send the artists their individual schedules for the month, but I do not want to copy and paste individual rows to their new sheets as this is a pain. I know i can sort by artist and copy it easier, but really i just want to put in the info once and not multiple times.
So the master is sheet 1, on sheets 2,3,4,5,6,7 (each one assigned to a particular artist) i need the artists gigs for that month.
I am creating a spreadsheet for mutiple clients, which has around 5 columns. This spreadsheet will have 7 sheets on it. 1 sheet for each client, and the 7th will be to display all of the information together.
Basically I am looking to find out if this is possible?
I will try and explain a bit more, as above is just beifly what I am loking for.
I Have Client.xls
On my Tabs I have
Client1, Client2, Client3, Client4, Client5, Client6, All Clients
In Each individual spreadsheet, I have the following Columns
Incident Reference; Description; PMDB number
Each Day data will be entered into each client sheet, and I would like this information to be populated into the All Clients Tab. I am not sure if this is possible, and if it is, would I then be able to put it into the All Clients tab, and have it auto sort by the incdient reference column? As this is an autogenerated reference for all of our clients.