ActiveCell.Activate...
Nov 23, 2009ActiveCell.Activate. I'm reading through a VBA book and one line of code was
View 4 Replies
ADVERTISEMENT
Range(activecell, Activecell.end(xlright)).copy
Apr 6, 2007Does this code copy all cells from the active cell up to the last non-blank cell, or is it up to the first blank cell after the last non-blank cell?
View 9 Replies View RelatedActiveCell
Dec 18, 2006Here's the situation:
I want to search through the cells in a column to locate text in one of the cells. If this text is found, I want to make that the ActiveCell and then insert a row underneath it. If this particular text is not found, I want to insert a row and put that text that wasnt found into the first cell in the created row.
I trimmed down my code a lot so I could post it here.
So, in this particular case, once the user selects one of two product lines (named "ADC" and "DAC"), I want to first search for that text and if it is found I want that to be the new activecell and insert a new row.
The main problem is that I can't seem to figure out how to set the "Foundcell" as being the new active cell. My initial activecell is set by locating and selecting the cell containing the text "Product Line".
Here's my
Select Activecell And Following
Aug 7, 2009How can I select the current activecell and the next 50 following rows of that column? I cannot define a range since it has to variable.
View 4 Replies View RelatedActiveCell.Offset
Jan 1, 2010I want to use the following command but with more to it:
X=0
Y=0
Z=10
ActiveCell.Offset(rowOffset:=X, columnOffset:=Y).Activate
I want to use this type of command to highlight an area...not just move rows/columns. I want it to highlight from a point on the sheet marked by X and Y and then down Z rows.
So if I'm in cell A1 and want to highight from A1 down to A10, I'm not sure how to write that part of the code.
Losing ActiveCell Value
May 30, 2006I have a list of line entries for which I need to insert a variable amount of empty lines per line. (the variable amounts listed in a column to the right of my Active Row.
Unfortunatly I loose the ActiveCell's Value. During Debug it shows the correct cell and value, but after the Debug Step Over, the value shows 0 again. I include my
[code]
Sub IP_Insert_rows()
'
' IP_Insert_rows Macro
' Macro recorded 2006/05/29 by Joseph Clark
'
Dim GrpCtrVar As Integer
Dim LnCtrVar As Integer
GrpCtrVar = 3
LnCtrVar = Range("B8").Value
Looping With ActiveCell
Jul 1, 2006I am working on a sub that will populate a cell based on the values of two other cells.
The ws is of variable length, the columns are A through I. I have the logic done, now I need help with the looping. It only loops through the first row. I believe that my problem is something to do with declaring the ActiveCell and looping with that. Also should I use variable names rather than Range(A2) ex. Dim EMUNCD As Variant
EMUNCD = Range("H2").Value
I have the following code so far
Sub MainMgrRpt()
Dim LstRow As Long
LstRow = Cells(Rows.Count, 1).End(xlUp).Row
For Row_counter = 2 To LstRow
Dim planCase As String
planCase = Range("F2").Value
Set Print Area Using Activecell
Oct 7, 2012Goal is to select range from active cell ( where coursos is ) to the top of that row. For some reason
ActiveSheet.PageSetup.PrintArea = Range("xey1":ActiveCell())
Does not work?
Identify Activecell Of A Shape?
May 24, 2014I have put a rectangle shape in a cell in excel. The shape is within the border of a particular cell.
Is there a way to find the reference of the cell on which that particular shape resides.
For example, I have kept a rectangle shape in cell F5. I was looking for a macro which would return the cell reference "F5" in which the shape resides.
Get Listbox Selection Into The ActiveCell?
Apr 26, 2014On Select cell F6 my list box appear, however once an item is selected form the listbox, i cannot get it to appear in the active cell (F6).
code and where to place it to make this work
ActiveCell And Command Button
Mar 5, 2009I have a spreadsheet that automatically analyzes the last week's worth of data and then displays a table of summary data from that analysis in the range C2:G11. Each row (i.e. 2:11) represents the statistics from one of the 10 regions in the state. I then have a second "details" table which remains blank (it occupies the range C14:G20; one row for each day of the week) until an "x" is typed in Column H in the cell adjacent to a region's summary data above, e.g.
if I want to display detailed data for region 4 for the last week, I would type an "x" in cell H5; formulas in the blank "details" table then lookup information on region 4 from a larger dataset. This system works fine, but is a little clumsy (typing "x"'s and deleting previous "x"'s, etc.).
Here's what I would like:
1): A macro for this sheet that will place an "x" in the ActiveCell (only in the case that the active cell is somewhere in the range H2:H11), will remove that "x" when that cell is no longer active, and will not place more than one "x" at a time-- for instance if more than one cell is accidentally highlighted
2): Also, I would like to be able to paste the values and formatting of the "details" table (C14:G20) to a separate sheet (we'll call it Sheet2) if they're interesting, and I'd like to be able to do this with a command button. The problem is I don't know... 1: how to place a button on the sheet, 2: how to attach code to this button, 3: where to place this code (can it go in the same place as the ActiveCell macro I described earlier?).
Ideally, the code would allow me to paste an arbitrary number of these tables to Sheet2, so the code would need to be able to identify the first blank cell in Column A as the location to paste a new table when the button is clicked.
Mouse Relocation To ActiveCell
Nov 20, 2009I've got an application where I switch between workSheets and the mouse stays in the same location. As all of my actions are predicated on mouse right-clicks or double-clicks, the first thing that I have to do as move the mouse back to the active cell. Is there a way to reposition the mouse to the activeCell upon returning to the workSheet?
View 6 Replies View RelatedActiveCell Falls Within A Specified Range
Apr 25, 2007I want my code to verify that the Active Cell on a worksheet falls within a specified range of cells before the sub fires off.
View 9 Replies View RelatedACtiveCell.row: Active Row Is Empty
Jun 9, 2007I am trying to write a statement that sees if the the row below the active row is empty.
I have written the following but it is wrong. Please can someone correct it for me? Thanks!
If IsEmpty(ActiveCell.Row.Offset(1, 0)) = False Then
MsgBox "Not Empty"
End If
Activecell/deactivate A Cell
Jan 21, 2009is it possible to deactivate an activecell?
the following code works well i have a range of cells(e1:o17) i click on one of those cells to enter a score into (a2) the next cell i click enters a score into (b2) ok so far but if i need to enter the same score consecutively as needs to be done from time to time i cant do it because the cell is still active.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("d1") = Range("d1") + 1
If Range("D1") = 2 Then Range("a2") = ActiveCell.Value: Range("c2") = 501 - Range("a2")
If Range("D1") = 3 Then Range("a3") = ActiveCell.Value: Range("c3") = Range("c2") - Range("a3")
If Range("D1") = 4 Then Range("a4") = ActiveCell.Value: Range("c4") = Range("c3") - Range("a4")
If Range("D1") = 5 Then Range("a5") = ActiveCell.Value: Range("c5") = Range("c4") - Range("a5")
Copy ActiveCell OnChange
Sep 24, 2009I am trying to copy the active cell from a range on sheet 1 to a new sheet ( Sheet 2 )in the next available row of Column B ONLY if the value changes from being blank.
If it was not empty I dont want it to be copied.
I cant seem to get my onChange event to copy anything.
Way To Use ActiveCell In Median Formula?
Oct 23, 2009In Excel VBA, is there any way to use ActiveCell in Median Formula?
E. G. Range("A5").Formula="=Median(ActiveCell.d5). Say ActiveCell already
defined as Range("D2").Select or Activate.
VBA doesn't accept this method. Any other way to use other than R1C1 direct address in the use of Median formula?
Delete TextBox That Is Placed On The Activecell
Sep 23, 2004How to select the TextBox that is placed on the activecell without referencing
to the TextBox number i.e ( TextBox1 ) I reached this code, but it is with the textbox number………sometimes I want to delete the TextBox that is placed on the activecell, so the user doesn't know the number of the textbox that is placed on the activecell………
ActiveSheet.Shapes("TextBox1").Select
Selection.Delete
Copy Range & Keep ActiveCell The Same
Aug 16, 2007trying to make a copy range of cells from an activecell.
My activecell is P9 and I want to copy the contents of P1 to P18 without losing P9 as the activecell.
VBA Select Entire Table Row Below ActiveCell
Jul 7, 2014I have code to Add a row to my Table ...
[Code] .....
Now, how do I select the entire Table row below ActiveCell?
Selecting From Point X To End, And Sliding ActiveCell Over Or Down
Nov 4, 2008I'm really sorry to keep bothering this board, but I'm trying to get all my basics down and finish up this project! I have two last issues, and I'm sure they're both simple for those of you who knows this language well. 1) Is there a way I can easily select a range from the active cell until the end of that column or row. For instance, instead of:
View 2 Replies View RelatedActivecell Reference From Command Button
May 6, 2009I have about 200 command buttons on my spreadsheet. Since there are so many of these, I would like to create a VBA routine to determine the cell name four cells over from the cell each command button sits inside, if possible (each command button is small and sits within its own cell). So the command button in cell F1, will let me pull the data or get the cell name of cell C2.
So I guess I am trying to figure out how to do relative references from a command button. Then this will be put in a public variable and passed to a subroutine which is the same for each command button. Only the data in the cells relative to the command button changes. I thought activecell might be useful for this, but you when press a command button, it doesn't make that cell the active cell.
I just thought there might be a simple solution for this, instead of having each single command button have its own subroutine just so each one can reference cells. All I really need is to run the same subroutine with variables from 200 cells, one at a time.
Activecell As A Referance To Delete The Selected Kit
Jul 17, 2009I have been trying to use the activecell as a referance to delete the selected kit. _Though i need like + 2 columns to xlToRight.
Then i want to select the data below the deleted kit and cut paste it to the orignal activecell.
Userform Text Based On ActiveCell
Jul 20, 2009As usual, I think this might be a really simple one but I can’t seem to find the answer. I want to create a userform that has text at the top (not the title bar) that looks at the value in the ActiveCell.
e.g. "Please enter information for " & ActiveCell
I have tried to place this in a text box and the code for the text box but nothing seems to work I am pretty new to userforms so could well be going about this completely the wrong way.
Get ActiveCell Data From Inactive Sheet
Aug 8, 2009I need to grab data from one sheet while I'm in a different one - same workbook, however. From the first sheet, the data that I need would be an "activeCell.value" issue. From the other sheet, however, how can I get that cell's data - an "inactiveCell.value" call, in essence? Right now, I'm getting around it by assigning the value to a global variable but that seems wasteful.
View 4 Replies View RelatedActiveCell With Multiple Cells (range)
Dec 16, 2011I would like to select multiple active cells (in different columns) and have them copied and pasted in another sheet. The current macro I am using seem to work fine, except for the fact that it only selects cell A3 to the end of the list in that active column. I would like it to also select B3 - down, C3 - down, and E3 - down.
I "Bolded" where I think the problem lies.
Sub Sort()
Sheets("Univerity Rankings").Select
Range("a3:z10000").Select
[Code].....
Use VBA To Determine Object Closest To ActiveCell
Jan 2, 2008I prefer to use the keyboard--rather than the mouse--as much as possible. To avoid having to use the mouse to select objects that I need in an Excel spreadsheet (like textboxes or charts), I'd like to write a macro that selects whatever object is "above" the activecell. This would allow me to select a textbox, for instance, simply by navingating the activecell (not cursor) to just underneath it and then executing the macro (from a hot-key combination, of course).
View 9 Replies View RelatedReturn To Activecell Prior To Macro Run
Apr 25, 2008I have a macro that selects various cells whilst it runs - nothing unusual there! What I'd like it to do is return to the activecell immediately prior to running the macro. So if cell 'B34' is active and then the Macro runs it currently returns to cell 'A12' (the last selection in the macro).
I would like it to return to cell, in this instance, 'B34'. The activecell could of course be any reference within the spreadsheet, so whatever is active prior to running macro is returned to when macro is complete.
Activecell.Offset & Additional Formula
Sep 18, 2008when the user enters the letter Y in a cell within a set column a macro kicks in and enters a VLOOKUP formula in a cell 1 row above and 4 columns to the left by using ActiveCell.Offset (-1,-4).
This seems to work fine however when I try and get the coding to copy and paste special as values it just seems to ignore it?
Change Activecell Of An Inactive Sheet
Dec 18, 2008CopyPaste operations leaves the goal range selected and I don't want that. The .Activate and .Select methods seem to require that the cell to be selected refers to the ActiveSheet.
What I'm doing now to change the active-cell is kind of:
1. Disable ScreenUpdating
2. Save a reference to ActiveCell
3. Activate the relevant goal-worksheet
4. Change the ActiveCell to the upper-left-cell of the Selection
5. Come back by the reference in point number 2
6. Enable ScreenUpdating.
It works, but seems to me as a huge job for something as simple than "collapsing" a multi-cell-selection. Another irritating problem is the slight screen-shaking caused by the disabling/enabling ScreenUpdating.