# ActiveCell Falls Within A Specified Range

Apr 25, 2007I want my code to verify that the Active Cell on a worksheet falls within a specified range of cells before the sub fires off.

View 9 RepliesI want my code to verify that the Active Cell on a worksheet falls within a specified range of cells before the sub fires off.

View 9 RepliesADVERTISEMENT

Does this code copy all cells from the active cell up to the last non-blank cell, or is it up to the first blank cell after the last non-blank cell?

View 9 Replies View RelatedI have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.

Teh StandHTML then gets used in the body of the email like other HTML items I use

The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.

Dim Myrange As Range

Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select

If Myrange = "x" Then

StandHTML = StandHTML & "Important Text"

End If

make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.

=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")

and if the any of the number fall into the range it will print the message, "Attachment is Required"

I have a list (a) with distances and another list (b) that gives numbers to certain distance ranges. For instance:

[Code] ...........

Now, if I have a value of 4.5 in list (a), I want to look up the respective zone. For 4 classes, this can be done with an if formula (=if(4.5>50;Zone 4;if(4.5>25;Zone 3;if(..and so on))).

What can I do if I have lets say more than 100 ranges with respective zones (ranges not of equal size) because an if formula will not be feasible anymore?

I'm trying to count, in a range of cells, how many fall between certain values, such as between 75,000 and 99,000. The array formulas seems the way to go, but it looks like it only accepts one condition not a range.

View 9 Replies View RelatedExample:

0000-0999 Cell a1

1001-1999 Cell a2

2000-2999 Cell a3

3000-3999 Cell a4

These are a ranges of values in a spreadsheet. I would like to be able to do a search or lookup for a number that I designate that falls within one of these ranges and it will direct me to the cell that my value falls within.

For example if I do a search for 1550 it would take me to cell a2 with a range of 1001-1999.

Not sure if this is too complicated for a formula and might need to use VBA.

Dates

1/2/2006

11/29/2007

7/3/2008

Table:

Year Start Date End Date

2005 01/30/2005 01/28/2006

2006 01/29/2006 02/3/2007

2007 02/04/2007 02/2/2008

2008 02/03/2008 01/31/2009

For each "Date", I need to scan the table and find which "Start Date" and "End Date" range does it fall into and return the applicable "Year". For example:

1/2/2006 will return 2005

11/29/2007 will return 2007

7/3/2008 will return 2008

I need a formula that will tell me which 'BPS' a person should receive based off of the count of loans closed (between 'Criteria 2' & 'Criteria 2.1' and/or the volume (total of 'Loan Amount')(between 'Criteria 1' & 'Critera 1.1'), whichever gives the person a the higher tier.

I have provided an example below. In the example John Doe should receive .01750 'BPS' because he closed over 1 million in volume. If, for example, John Doe closed 5 loans for 400,000, then he would receive .01600, since he met the criteria for the 2nd tier based off of # of loans closed.

The formula needs to take into consideration which 'Comp Plan' the person has, as well as the other criteria mentioned above.

Bitmap BRANCHBitmap COMP PLANCOMP PLAN IDCOMP PLAN TIERCRITERIA 1CRITERIA 1.1CRITERIA 2CRITERIA 2.1BPSSACRAMENTOSAC-COMP-A11$ - $ 599,999.99 020.01250SACRAMENTOSAC-COMP-A12$ 600,000.00 $ 999,999.99 350.01500SACRAMENTOSAC-COMP-A13$ 1,000,000.00 $ 100,000,000.00 61000.01600SACRAMENTOSAC-COMP-B21$ - $ 599,999.99 020.01500SACRAMENTOSAC-COMP-B22$ 600,000.00 $ 999,999.99 350.01600

[Code] .......

If I have A1 ( and the rest of row 1) that equals a standard Date Period such as shown below, What would the formula to be to sum all of the numbers if today falls within the range, as well as sum previous ranges.

For instance, If today were 02/15/09, it would only sum A2

If today were 03/15/09 it would sum B2 as well as previous time periods (B2 + A2)

If today were 4/15/09, it would sum C2 as well as previous time periods (C2 plus B2 and A2)

A1........................................B1......................................C1

"02/05/09 - 03/02/09".............."03/03/09 - 04/01/09"............"04/02/09 - 05/05/09"

15........................................21......................................36

I am half way through a Worksheet where I am using VBA to perform more than the measly 3 Conditional formats that excel offer. This is working fine but I am now looking into a way of reversing the formats if a mistake is made and the condition is removed.

To make this sound more straightforward it is a rota sheet. If I enter Holiday the cells interior turns pink, Half turns light blue, On Call turns green etc. If this is changed I need to change it back to the original formatting.

I have partly done this with a Case "" but the Rota changes colour with different teams so I need to have an IF statement in there that say if the Target Cell falls within this Range say A5:AF10 change to tan IF the target falls within A6:Af20 change to sky blue etc. Below is the code I have so far.

Private Sub Worksheet_Change(ByVal Target As Excel.Range)

Dim WatchRange As Range

Dim CellVal As String

On Error Resume Next

CellVal = Target

Set WatchRange = Range("A1:AF100")

If Not Intersect(Target, WatchRange) Is Nothing Then

Select Case CellVal

Case "Holiday"

Target.FormatConditions.Delete

Target.Interior.ColorIndex = 38

Target.Font.ColorIndex = 1......................

trying to make a copy range of cells from an activecell.

My activecell is P9 and I want to copy the contents of P1 to P18 without losing P9 as the activecell.

I am trying to learn more about functions like IF(), AND() MATCH() and LOOKUP()... but so far I cant seem to get it right. I am actually trying to get a simple working formula that can take a value from the first tab and cross reference it with a table in the second tab to return another value in the first tab.

For example....

On the first tab/sheet named "Details", i have a list of people, an area of work they fall in and then a column named region that categorizes their areas of work into groups

A

B

C

1

Name

Area of Work

Region

2

Mr A

J

?

3

Mr B

6

?

4

Mr D

Z

?

5

Mr E

18

?

Then on the next tab/sheet named "Category", I have a table which lists the areas that belong to a region;

A

B

1

Region

Area

2

1

A-J. 1-6

3

2

K-P, 7-15

4

3

Q-U,W,Z,16-20

I have tried formulas like IF(AND(B2=Category.B2),"1","ERROR") but it keeps returning me "ERROR" when it should return "1"

The number in cell M21 falls into one of the ranges from C4 to C15. A matrix number needs to be printed in each cell from N21 to N30. The selection of the number to be printed in column N (under Matrix Assignment) depends on the range it is next to in array A4:C15. For example (as shown), the correct number for cell N21 is 122 because 0.2626 falls between 0.24 - 0.2699, and Matrix 122 corresponds to that range.

View 3 Replies View RelatedSecondly, I'm using Excel 2007.

In column B3:B367, I have dates for every day of the year. In column D3:D367, I have body weight for every day of the year. This gets filled in on a daily basis.

What I'm looking to do:

1. Find the first daily weight for the month.

2. Find today's weight.

3. See if today's weight falls within the specified month.

4. Compare the first daily weight of the month with today's weight.

I am able to accomplish #1 with LOOKUP, #2 with LOOKUP, and #4 with IF/THEN. For the life of me, I cannot comprehend how to do #3.

Data set

Column A Column B

PriceCode1 5.36

Sheet 2 Data Set

Column A Column B Column C Column E

PriceCode1 5.02 10.01 313

PriceCode1 10.02 50.01 314

PriceCode1 50.02 100.01 315

Formula on Sheet 1:

{=INDEX('Price calculation'!$E$1:$E$70,MATCH(C3&D3,'Price calculation'!$A$1:$A$70&'Price calculation'!$B$1:$B$70,1))}

The issue I am having is that the value isn't an exact match so it is returning line 3 with a value of 315 rather than line 1 and a value of 313. What am I doing wrong?

I would like to select multiple active cells (in different columns) and have them copied and pasted in another sheet. The current macro I am using seem to work fine, except for the fact that it only selects cell A3 to the end of the list in that active column. I would like it to also select B3 - down, C3 - down, and E3 - down.

I "Bolded" where I think the problem lies.

Sub Sort()

Sheets("Univerity Rankings").Select

Range("a3:z10000").Select

[Code].....

Can i convert this

ActiveCell. Offset(-1, 0).Copy

With ActiveCell

.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _

SkipBlanks:=False, Transpose:=False

.ClearOutline

End With

So that i can copy/paste the Offset range such as (-1,-2) (-1,1)?

I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):

_____A________B_________C____

1 ___0.0%_____50%_____$5.00

2 ___51%______75%_____$15.00

3 ___76%_____100% ____$25.00

Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).

I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.

I have a custom range -55% to 55% as part of a grading system for sales growth. I want to return a 0-100% grade depending on where within that -55% to 55% range a sales reps growth for a month falls. For exaple, if a sales rep scores 0% growth for a month, they will receive a 50% grade by where 0% falls within the -55% to 55% range.

View 1 Replies View RelatedI've been trying to get the sum of a range of cells based on their relation to the active cell. Here is the Pseudo

If the SUM of (the cell 2 rows up THROUGH the cell 2 rows up and 2 columns to the left) = 0 then .......

*****end pseudo

I think that activecell.offset is the best way to do it, but I can't figure out how to work that in a range....

Here is my code so far:

Worksheets("Generic SPC").Activate

Worksheets("Generic SPC").Range("c2").Select

'Do for all cells in the row

Do

ActiveCell.Offset(0, 1).Select

If Application.WorksheetFunction.Sum(Range( _

ActiveCell.Offset(-2, 0), ActiveCell.Offset(-2, 2))) = 0 Then

ActiveCell.Value = 0

ElseIf Application.WorksheetFunction.Sum(Range _

("ActiveCell.Offset(-2, 1), ActiveCell.Offset(-2, 3)")) = 0 Then

ActiveCell.Value = ActiveCell.Offset(-2, 0).Value

Else: ActiveCell.Value = 0

End If

Loop Until IsEmpty(ActiveCell.Offset(0, 1)) = True

******End Code

Range doesn't like activecell.offset. Does anyone know how to do this?

I have a combobox which is linked to a list of policies which has information to the right of them, upon changing the value in the combobox the subroutine below is activated.

It stores the value of the combobox in a string variable, goes to the list and searches for the cell containing the policy. Upon finding the cell it uses the range offset operation to select the two boxes to the right of the active cell. This is where I get my error 1004 - application or object defined error.

Code

Private Sub cmbSectionName_Change()

Dim mySearch As String

'Assigns combobox contents to mysearch

mySearch = cmbSectionName.Value

'select the range

Application.Goto Reference:="SectionNameList"

File A has patients with discharge dates over two years. Each patient may have multiple dates. Example:

Patient Discharge Date

John Smith 7/1/2012

John Smith 10/1/2012

Judge Judy 7/1/2013

Judge Judy 12/1/2013

File B has office visit dates for the patients. Again, each patient has multiple office visits. I need to be able to see which office visits were within 15 days of a discharge date. Example:

Patient Office Visit

John Smith 6/1/2012

John Smith 6/15/2012

John Smith 7/10/2012

Judge Judy 7/20/2013

Judge Judy 12/12/2013

Is there any way to note next to the discharge date that for John Smith the 7/10/2012 office visit was within 15 days of the 7/1/2012 discharge? And the same for Judy with the 12/12/2013 visit?

i need to make a formula for excel which will verify if my actual value falls within a specific range. for instance if my value is 0.15 and the allowed range is 0.145 to 0.155 then i want to display the number zero in the cell however if the actual number is above or below the range i want to calculate the amount of deviation from the range

View 2 Replies View RelatedI am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"

It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.

I have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.

View 3 Replies View RelatedRefer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?

Attached image: Capture.JPG

Here's the situation:

I want to search through the cells in a column to locate text in one of the cells. If this text is found, I want to make that the ActiveCell and then insert a row underneath it. If this particular text is not found, I want to insert a row and put that text that wasnt found into the first cell in the created row.

I trimmed down my code a lot so I could post it here.

So, in this particular case, once the user selects one of two product lines (named "ADC" and "DAC"), I want to first search for that text and if it is found I want that to be the new activecell and insert a new row.

The main problem is that I can't seem to figure out how to set the "Foundcell" as being the new active cell. My initial activecell is set by locating and selecting the cell containing the text "Product Line".

Here's my

Formula for the attached worksheet.

In the table of cells A3:G12 there is a list of staff I have working that day and the hours that they are working, which I enter manually.

The table A14:G89 is a list of matches that my staff will be monitoring which I paste in from a downloaded list. Column G is blank when I paste is filled in by the table on the right which is what I want to achieve at then end.

Once I have entered the times that people are working that day then scroll over to the right and look to fill in the column headed 'Monitoring'.

What I want is the 'Schedule Table' at the top of the worksheet. What I want to do here is place a formual in these cells to display how many matches a member of staff is monitoring concurrently at any given 15 minute interval. I've filled in down to the 11.05 kick-off to show what I want it to display but obviously I want to find a formula to replace this manual intervention.

Monitoring Scheduler.xls

I have a list of dates in col "A". In col "B" i would like it to display the week it falls on. Example 12/12/08 would fall under week 12/7/08 to 12/13/08.

View 6 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved