How to select the TextBox that is placed on the activecell without referencing
to the TextBox number i.e ( TextBox1 ) I reached this code, but it is with the textbox number………sometimes I want to delete the TextBox that is placed on the activecell, so the user doesn't know the number of the textbox that is placed on the activecell………
ActiveSheet.Shapes("TextBox1").Select
Selection.Delete
I have been trying to use the activecell as a referance to delete the selected kit. _Though i need like + 2 columns to xlToRight.
Then i want to select the data below the deleted kit and cut paste it to the orignal activecell.
Does this code copy all cells from the active cell up to the last non-blank cell, or is it up to the first blank cell after the last non-blank cell?
View 9 Replies View RelatedI have inherited a spreadsheet that has a text box and a radio form that I cannot delete. I can't click to select either one nor right click to do anything. I have an "Approve" and "Reject" button on top of them and those work great. But how do I delete the text box and reject radio button?
View 2 Replies View RelatedI have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Here's the situation:
I want to search through the cells in a column to locate text in one of the cells. If this text is found, I want to make that the ActiveCell and then insert a row underneath it. If this particular text is not found, I want to insert a row and put that text that wasnt found into the first cell in the created row.
I trimmed down my code a lot so I could post it here.
So, in this particular case, once the user selects one of two product lines (named "ADC" and "DAC"), I want to first search for that text and if it is found I want that to be the new activecell and insert a new row.
The main problem is that I can't seem to figure out how to set the "Foundcell" as being the new active cell. My initial activecell is set by locating and selecting the cell containing the text "Product Line".
Here's my
How can I select the current activecell and the next 50 following rows of that column? I cannot define a range since it has to variable.
View 4 Replies View RelatedActiveCell.Activate. I'm reading through a VBA book and one line of code was
View 4 Replies View RelatedI want to use the following command but with more to it:
X=0
Y=0
Z=10
ActiveCell.Offset(rowOffset:=X, columnOffset:=Y).Activate
I want to use this type of command to highlight an area...not just move rows/columns. I want it to highlight from a point on the sheet marked by X and Y and then down Z rows.
So if I'm in cell A1 and want to highight from A1 down to A10, I'm not sure how to write that part of the code.
I have a list of line entries for which I need to insert a variable amount of empty lines per line. (the variable amounts listed in a column to the right of my Active Row.
Unfortunatly I loose the ActiveCell's Value. During Debug it shows the correct cell and value, but after the Debug Step Over, the value shows 0 again. I include my
[code]
Sub IP_Insert_rows()
'
' IP_Insert_rows Macro
' Macro recorded 2006/05/29 by Joseph Clark
'
Dim GrpCtrVar As Integer
Dim LnCtrVar As Integer
GrpCtrVar = 3
LnCtrVar = Range("B8").Value
I am working on a sub that will populate a cell based on the values of two other cells.
The ws is of variable length, the columns are A through I. I have the logic done, now I need help with the looping. It only loops through the first row. I believe that my problem is something to do with declaring the ActiveCell and looping with that. Also should I use variable names rather than Range(A2) ex. Dim EMUNCD As Variant
EMUNCD = Range("H2").Value
I have the following code so far
Sub MainMgrRpt()
Dim LstRow As Long
LstRow = Cells(Rows.Count, 1).End(xlUp).Row
For Row_counter = 2 To LstRow
Dim planCase As String
planCase = Range("F2").Value
Goal is to select range from active cell ( where coursos is ) to the top of that row. For some reason
ActiveSheet.PageSetup.PrintArea = Range("xey1":ActiveCell())
Does not work?
I have put a rectangle shape in a cell in excel. The shape is within the border of a particular cell.
Is there a way to find the reference of the cell on which that particular shape resides.
For example, I have kept a rectangle shape in cell F5. I was looking for a macro which would return the cell reference "F5" in which the shape resides.
On Select cell F6 my list box appear, however once an item is selected form the listbox, i cannot get it to appear in the active cell (F6).
code and where to place it to make this work
I have a spreadsheet that automatically analyzes the last week's worth of data and then displays a table of summary data from that analysis in the range C2:G11. Each row (i.e. 2:11) represents the statistics from one of the 10 regions in the state. I then have a second "details" table which remains blank (it occupies the range C14:G20; one row for each day of the week) until an "x" is typed in Column H in the cell adjacent to a region's summary data above, e.g.
if I want to display detailed data for region 4 for the last week, I would type an "x" in cell H5; formulas in the blank "details" table then lookup information on region 4 from a larger dataset. This system works fine, but is a little clumsy (typing "x"'s and deleting previous "x"'s, etc.).
Here's what I would like:
1): A macro for this sheet that will place an "x" in the ActiveCell (only in the case that the active cell is somewhere in the range H2:H11), will remove that "x" when that cell is no longer active, and will not place more than one "x" at a time-- for instance if more than one cell is accidentally highlighted
2): Also, I would like to be able to paste the values and formatting of the "details" table (C14:G20) to a separate sheet (we'll call it Sheet2) if they're interesting, and I'd like to be able to do this with a command button. The problem is I don't know... 1: how to place a button on the sheet, 2: how to attach code to this button, 3: where to place this code (can it go in the same place as the ActiveCell macro I described earlier?).
Ideally, the code would allow me to paste an arbitrary number of these tables to Sheet2, so the code would need to be able to identify the first blank cell in Column A as the location to paste a new table when the button is clicked.
I've got an application where I switch between workSheets and the mouse stays in the same location. As all of my actions are predicated on mouse right-clicks or double-clicks, the first thing that I have to do as move the mouse back to the active cell. Is there a way to reposition the mouse to the activeCell upon returning to the workSheet?
View 6 Replies View RelatedI want my code to verify that the Active Cell on a worksheet falls within a specified range of cells before the sub fires off.
View 9 Replies View RelatedI am trying to write a statement that sees if the the row below the active row is empty.
I have written the following but it is wrong. Please can someone correct it for me? Thanks!
If IsEmpty(ActiveCell.Row.Offset(1, 0)) = False Then
MsgBox "Not Empty"
End If
is it possible to deactivate an activecell?
the following code works well i have a range of cells(e1:o17) i click on one of those cells to enter a score into (a2) the next cell i click enters a score into (b2) ok so far but if i need to enter the same score consecutively as needs to be done from time to time i cant do it because the cell is still active.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("d1") = Range("d1") + 1
If Range("D1") = 2 Then Range("a2") = ActiveCell.Value: Range("c2") = 501 - Range("a2")
If Range("D1") = 3 Then Range("a3") = ActiveCell.Value: Range("c3") = Range("c2") - Range("a3")
If Range("D1") = 4 Then Range("a4") = ActiveCell.Value: Range("c4") = Range("c3") - Range("a4")
If Range("D1") = 5 Then Range("a5") = ActiveCell.Value: Range("c5") = Range("c4") - Range("a5")
I am trying to copy the active cell from a range on sheet 1 to a new sheet ( Sheet 2 )in the next available row of Column B ONLY if the value changes from being blank.
If it was not empty I dont want it to be copied.
I cant seem to get my onChange event to copy anything.
In Excel VBA, is there any way to use ActiveCell in Median Formula?
E. G. Range("A5").Formula="=Median(ActiveCell.d5). Say ActiveCell already
defined as Range("D2").Select or Activate.
VBA doesn't accept this method. Any other way to use other than R1C1 direct address in the use of Median formula?
trying to make a copy range of cells from an activecell.
My activecell is P9 and I want to copy the contents of P1 to P18 without losing P9 as the activecell.
I have code to Add a row to my Table ...
[Code] .....
Now, how do I select the entire Table row below ActiveCell?
I'm really sorry to keep bothering this board, but I'm trying to get all my basics down and finish up this project! I have two last issues, and I'm sure they're both simple for those of you who knows this language well. 1) Is there a way I can easily select a range from the active cell until the end of that column or row. For instance, instead of:
View 2 Replies View RelatedI have about 200 command buttons on my spreadsheet. Since there are so many of these, I would like to create a VBA routine to determine the cell name four cells over from the cell each command button sits inside, if possible (each command button is small and sits within its own cell). So the command button in cell F1, will let me pull the data or get the cell name of cell C2.
So I guess I am trying to figure out how to do relative references from a command button. Then this will be put in a public variable and passed to a subroutine which is the same for each command button. Only the data in the cells relative to the command button changes. I thought activecell might be useful for this, but you when press a command button, it doesn't make that cell the active cell.
I just thought there might be a simple solution for this, instead of having each single command button have its own subroutine just so each one can reference cells. All I really need is to run the same subroutine with variables from 200 cells, one at a time.
As usual, I think this might be a really simple one but I can’t seem to find the answer. I want to create a userform that has text at the top (not the title bar) that looks at the value in the ActiveCell.
e.g. "Please enter information for " & ActiveCell
I have tried to place this in a text box and the code for the text box but nothing seems to work I am pretty new to userforms so could well be going about this completely the wrong way.
I need to grab data from one sheet while I'm in a different one - same workbook, however. From the first sheet, the data that I need would be an "activeCell.value" issue. From the other sheet, however, how can I get that cell's data - an "inactiveCell.value" call, in essence? Right now, I'm getting around it by assigning the value to a global variable but that seems wasteful.
View 4 Replies View RelatedI would like to select multiple active cells (in different columns) and have them copied and pasted in another sheet. The current macro I am using seem to work fine, except for the fact that it only selects cell A3 to the end of the list in that active column. I would like it to also select B3 - down, C3 - down, and E3 - down.
I "Bolded" where I think the problem lies.
Sub Sort()
Sheets("Univerity Rankings").Select
Range("a3:z10000").Select
[Code].....
I prefer to use the keyboard--rather than the mouse--as much as possible. To avoid having to use the mouse to select objects that I need in an Excel spreadsheet (like textboxes or charts), I'd like to write a macro that selects whatever object is "above" the activecell. This would allow me to select a textbox, for instance, simply by navingating the activecell (not cursor) to just underneath it and then executing the macro (from a hot-key combination, of course).
View 9 Replies View Related