VBA Select Entire Table Row Below ActiveCell
Jul 7, 2014I have code to Add a row to my Table ...
[Code] .....
Now, how do I select the entire Table row below ActiveCell?
ADVERTISEMENT
Select Activecell And Following
Aug 7, 2009How can I select the current activecell and the next 50 following rows of that column? I cannot define a range since it has to variable.
View 4 Replies View RelatedRange(activecell, Activecell.end(xlright)).copy
Apr 6, 2007Does this code copy all cells from the active cell up to the last non-blank cell, or is it up to the first blank cell after the last non-blank cell?
View 9 Replies View RelatedLookup Up Entire Table Not Just Column In Table Like Vlookup Does
Jun 5, 2014I'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
Select Entire Row & Column
Feb 19, 2010As the title sugests I would like to Select a cell and a macro will highlight the row and column
Sub Select_Entire_Row()
Dim RowNo As Integer
Dim ColNo As Integer
RowNo = Selection.Row
ColNo = Selection.Column
If RowNo.Value >= 1 Then
Cells(RowNo, ColNo).EntireRow.Select ' I want it to do both not one then the other
Cells(RowNo, ColNo).EntireColumn.Select
End If
End Sub
Short Cut Key To Select Entire Row
Jul 31, 2007Is it possible to select entire row while Pressing Down Arrow Key from the key board.
View 2 Replies View RelatedSelect Specific Columns Rather Than Entire Row
Sep 28, 2013I plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB:
Sub completedtest()
Dim c As Range
Dim rngG As Range
For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
Autofilter Will Not Always Select Entire Sheet
Sep 4, 2009I have a workbook that uses Autofilter.
Column A has data. Column B is hidden, has no data, and is empty.
Colmn C has data, on through the rest of the sheet (to Column AB).
Why column B has no data is unimportant for now. It, however, must maintain its existance and cannot be deleted.
When I select the autofilter sort button on column A, it selects only that column, and not the rest of the sheet. Data is subsequently scrambled.
When I unhide the empty column B and select the sort button on column B, it selects the entire sheet. Data remains intact.
When I select the sort button on column C, it selects the rest of the sheet, but not column A (with data), or B (with no data). Data is subsequently scrambled.
Select Entire Blank Rows
Mar 30, 2012I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code:
Sub Test()
If Selection.Select "" Then
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Else
Range(Selection, Selection.End(xlToRight)).Select
End If
End Sub
Select Entire Row With A Named Variable
Feb 6, 2007I have this problem quite often and always have to think of a way around it, however I think there must be a simple method of doing what I want.
If I want to select row three, I would write:
Rows("3:3").Select
However, if I have a variable which holds my row number how do I rewrite the above code? I've tried serveral varations of:
Rows("CurrentRow:CurrentRow").Select
Select Entire Column Except The Merged Cells
May 19, 2014I've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns
This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)
[Code] .......
Select Active Cells And Delete Entire Row
Oct 30, 2012I have data that i import on a daily basis, the data can range from a couple of rows to thousands,
What I need to do using VBA is select the active cells, where cells in row ''G'' is blank then delete the entire row where that cell is.
How To Select An Entire Range Of Non-Contiguous Cells In A Column
Aug 19, 2009I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
Select Column C And Delete Blank Entire Rows Till C300
May 4, 2014i want to delete entire blank row from column C2:C300 i mean if i have data c2:c100 then c101:c300 delete entire blank rows
View 4 Replies View RelatedDelete Entire Row From Excel Table When Cell Not Zero?
Dec 27, 2012How to delete the entire row if the cell value of the "D" column is greater then zero (not containing "0").
View 8 Replies View RelatedAdding Formula To Entire Column In Table?
Mar 17, 2014I am trying to add a formula to a defined column in a a table. I get a method range of object error. I previously used the .value and a for loop to enter the forumlas into each cell but I would like to use a different approach. It's basically looking at the compelted column to see if the check box is checked. Here's my code.
Set ntidRange = Application.Range(tn & "[NTID]")
Set dtRange = Application.Range(tn & "[Date]")
Range(ntidRange).formula = "=IF([@COMPLETED]=TRUE,Login!K2,"""")"
Range(dtRange).formula = "=IF([@COMPLETED]=TRUE,Now(),"""")"
'For Each c In ntidRange.Cells
'c.formula = "=IF([@COMPLETED]=TRUE,Login!K2,"""")"
'c.Offset(0, 1).formula = "=IF([@COMPLETED]=TRUE,Now(),"""")"
'Next
Converting/multiplying Entire Data Table
Jun 4, 2006I have a spreadsheet of measurements which i need to convert. In short, all of the numbers must be multiplied by 2.54. I can follow how to do 1 number at a time, but the sheer number of calculations makes this highly inefficient. I think my problem lies in settng up the formula properly. I am working with an iBookG4 with an excel program 11.2.3.
View 3 Replies View RelatedConditionally Format Entire Table If Values Changed?
Feb 22, 2012I have two data tables (12 columns each, 60 rows each) in the same worksheet. Ideally, I'd like to conditionally format the 1st table to show if any values changed from the 2nd table.
I see that I can conditionally format each cell to compare to its respective cell in the 2nd table, but would rather not do this 720 times.
Excel 2010 :: Pivot Table Conditional Formatting - Highlight ENTIRE Row
Aug 16, 2013I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
Select Range In Entire Column To Fit Range From Another
Mar 26, 2013i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies View RelatedCatch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry
Jun 5, 2008I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.
Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer
fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry
' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........
Select Cell In A Table When Row Name And Column Name Is Given
Dec 30, 2013. A B C D E
1 JanFebMarApr
2 Galle JGFGMGAG
3 Matara JMFMMMAM
4 KalutaraJKFKMKAK
5 PanaduraJPFPMPAP
6 ColomboJCFCMCAC
7
8 City Month
9 Kalutara Mar MK
When I type 'Kalutara' in A9 and 'Mar' in B9 I should get the answer as MK in cell E9
'Colombo' " " 'Feb' B9 " " " FC in cell E9 by refering the above table
can we use MATCH & INDEX or VLOOKUP & HLOOKUP
What is the formula I should write in cell E9 to get this done?
Select And Show A Table With Conditions?
Feb 13, 2014I have a table with a lot of fields ( Date, Type, Name, Status ...etc). I want to make 2 textbuttons to put the Date intervals and a combo box to put the Type possibilities. After i put those condition i want to press a button to show only rows (from initial table)who are between data i entered and with kind of type i select.
View 1 Replies View RelatedHow To Select A Table Based On Cell Value
Oct 20, 2013I have many tables in separate sheet but in the same workbook. I need in sheet1 to call the specific table based on the value in D3 which it has the table name, how to do this?
View 9 Replies View RelatedWeb Query - Select Table Not Being Captured
Jan 28, 2010I'm trying to get the data from this site
http://www.cmegroup.com/clearport/pr...=1&PageStart=1
When going through the Web Query in Excel and pulling data with the above address. I get the option to pull the data from the products table..the table with the code/name/product group/sub group..etc etc...
But when I launch the query, it doesn't pull the table data..I get everything but the product list.
Select Value In Table That Corresponds To Last Date Entered?
May 14, 2014We have a table that tracks customer payment dates with corresponding payment details.
Our current Excel program works fine when the Customer payment dates progress (non-duplicate date entries) ... BUT .... sometimes a Customer will send multiple checks on the same date (duplicated date entries), and then our program gives incorrect results.
You will see that this Customer sent in three checks all dated 11/22/2013 ($100, $50, $50).
What we need is a formula that will look at the dates in Column-A, choose the last entry (before any zero or blank), then provide the corresponding value in Column-D.
So in this case, the result we need is (100.00) ... the value in cell D16. Our program is erroneously providing 100.00 ... the value in D14.
Randomly Select From Table With Blank Cell
Oct 31, 2013I am trying to randomly select 10 data from a table by using index formula. But there are some blank cell in the table so It kept returning 0 in the cell.
problem.xlsx
VBA To Find And Select Last Row In Dynamic Pivot Table?
Jan 31, 2014I am having issues with a VBA script. The Spreadsheet is linked to a SQL DB and updated with data from scripts that are executing throughout the day. This is then fed to a dashboard. We have a Baseline that shows in the Date column as 0/0 and 1/1. I need a way to ensure that the 1/1 is always in the last row of the chart so the baseline shows across the entire range of dates. The current method is to declare a variable and add 1 to it whenever we iterate through the sort for the other dates. However everyday the 1/1 baseline column ends up further to the beginning until it is next to the 0/0 in position 2.
So I am trying to find a way to have the macros find the last row of the Date field and then set the position to be equal to the last row.
Using Find In Macro To Select Range Of A Table
Jan 13, 2010I am trying to find a table of text, and copy it to another worksheet. I want to copy it as a range, not as rows or columns. Using Find, I can get to the 1st row of the table. Using Find again, I can get to the last row of the table.
What I don’t know how to do next is select the range.
For example; The table is in cells A10:F20. “Start” is in cell A10, and “End” is in cell A20.
Starting from cell A1, how do I find and select the range A10:F20.?
I will be doing this twice in the same macro, as there are 2 tables. Each of the 2 tables has the same “Start” and “End” text, as described above. The 2 tables will not always be located in the same location within the original WkSht.
Using VBA To Select And Deselect Pivot Table Items?
Mar 21, 2012I am trying to use the bellow code to set one pivot item (MyItem) to true and the rest to false... unsuccesfully
Code:
For Each pt In Sheets("Schedule Dashboard").PivotTables(PivotTable1)
If pt.PivotFields("District").PivotItems(MyItem).Visible = False Then
pt.PivotFields("District").PivotItems(MyItem).Visible = True
Else
pt.PivotFields("District").PivotItems.Visible = False
End If
Next pt