I have a text box and a command button, if i pass some specific values it will give me a message but when the given value is entered it states " run time error, mismatch ". My code is below
Should I change the text properties?
[Code] .....
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies View RelatedThe Code will not add the found values into the userform textboxe's.
View 14 Replies View RelatedIs there a macro that will copy the values in a textbox (TextBox1) to the clipboard so they can be pasted into an access database?
View 1 Replies View RelatedWhat is the best way to check to be sure that a text box contains numeric values prior to performing calculations?
I have a form that has many textboxes which a user enters values into to perform calculations. I want to make sure that each necessary field contains a numeric value prior to performing the calcuations.
This is what I have so far but for some reason it keeps giving me the message box:
If WorksheetFunction.IsNumber(Me.specGrav_txt) = True And _
WorksheetFunction.IsNumber(Me.pAngle_box) = True And _
WorksheetFunction.IsNumber(Me.pLength_box) = True And _
WorksheetFunction.IsNumber(Me.pSize_box) = True And _
WorksheetFunction.IsNumber(Me.pQty_box) = True And _
pModTrap_btn.Value = True Then
PrimMTcalc
Else
If WorksheetFunction.IsNumber(Me.specGrav_txt) = True And _
WorksheetFunction.IsNumber(Me.pAngle_box) = True And _
WorksheetFunction.IsNumber(Me.pLength_box) = True And _
WorksheetFunction.IsNumber(Me.pSize_box) = True And _
WorksheetFunction.IsNumber(Me.pQty_box) = True And _
pFullRnd_btn.Value = True Then
PrimFRcalc
Else
MsgBox "There is missing data." & vbNewLine & _
"Please check to make sure that all runer data has been entered" & vbNewLine & _
"and the Specific Gravity field contains a numeric value."
End If
End If
who can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies View RelatedI am trying to build a simple tool using an userform. I have my results as a range of cells A1:A10 in an excel sheet. The result will be like:
1-1
2-4
5-8
8-8
9-14
14-14
15-16
17-19
20-21
22-23
But I want the result to be displayed in one textbox in userform.Is there any way?
I have 3 sets of textboxes. The user inputs information and all the nformation for each are consolidated to one textbox(delaycomments.value)
2 of them are controlled by a calendar input. THe user chooses a date and the date is shown in a textbox. Then they enter notes in the the each comment (delay1, delay2, delay3)
The current code below works, however the spaces I used in between still show even if the values are empty.
So, the "-" that is used to separate the dates still shows even if there aren't any dates. And the ": " still shows as well.
If there is only information in delay1, this is what shows in the consolidated box(delaycomments.value)
5/7/2012-5/7/2012: test. -: -:
Is there a way to convert these to an if then statement to make sure the text only appears if there are values in the cells?
Code:
Private Sub Delay1Comment_Change()
Me.DelayComments.Value = (Me.Reason1Start.Value & "-" & Reason1End.Value & ": " & Me.Delay1Comment.Value & " " & Me.Reason2Start.Value & "-" & Reason2End.Value & ": " & Me.Delay2Comment & " " & Me.Reason3Start.Value & "-" & Reason3End.Value & ": " & Me.Delay3Comment & " " & Me.Reason4Start.Value & "-" & Reason4End.Value & ": " & End Sub
The following code works fine but I need some assistance on how to add values from a textbox per say. How would I go about adding the value of textbox1 to the code below. .HTMLBody = "<HTML><BODY>Job# –<br>Client Acronym –<br>CSR –<br>Kit(s) –<br><br>Comments –<br><br></BODY>" & Signature
View 8 Replies View Relatedi am trying to enter the EndX coordinates (The third number: 500) by entering a number in a forms textbox
ActiveSheet.Shapes.AddLine(0, 100, 500, 100).Select
how can i break the code up to enter the coordinates via textbox's
how to insert the value of a single cell into a text box... is it possible to insert a range of cells into a text box, and keep the same formatting, spacing, control boxes etc?
Reason behind this:
I have some information in a range of cells, let's say A10:D20 and I want to have a nice fill colour for that range... my thoughts were to copy this data into a text box, and use the fill properties to make it look pretty. but I've found that I can't do that..
My next attempt was to set the transparency of the text box to 100%, put some fill in it with a nice orange colour, and place the text box over the cells I wanted to look pretty... When I did this, it worked ok for the cells in the lighter portion of the colour, but when the colour became darker it would block the cell data underneath it...
I have a userform created with 27 textboxes that corrispond to columns A through AA. What I am trying to do is when the form is loaded, I want to have all the textboxes populate with the information accross row 2. Using a scroll bar, I want the user to be able to scroll through the entries so that when the user scrolls down, all textboxes change to the information in row 3, 4, 5 etc.
Ultimatley, this is a data entry form, allowing the user to lookup and edit entries on the page. I can figure out how to do everything I need, witht he exception of the scrollbar.
having a different calculations performed within a Textbox on a Userform depending on the selection made in a Combo Box. This was answered here.
Perform Calculation In Textbox On Userform
I have another question regarding this problem, however the thread is closed so I have posted a new thread.
The original question was answered and the solution works very well,however I now need to be able to use the selection from two (2) comboboxes to initiate the various calculations in a similar vain.
have a look at the original thread to get an idea of what I am looking for here.
I have tried many configurations of various code, all of which works to an extent buts which falls over in certain circumstances.
it is possible to populate a textbox (Userform_Initialize) with a predetermined range from a worksheet ("range" meaning " multiple cells"). I know you can set the ControlSource to populate the textbox using ONE CELL, but I don't know a way to do this with a range of data.
I've tried using the Value and Text properties, but no luck. I'm hoping to have the Userform Textbox populate automatically with a set of data when the Userform is opened. The data will always be 2 columns wide, but could be anywhere from 1 to 50 rows long. I've considered naming this dynamic range and then populate the textbox (somehow) with the named range. Can't figure it out and beginning to wonder if it is possible using VBA.
I have a userform for entering a sales invoice onto a spreadsheet, it obviously has a textbox each for the net value(textboxnet), gst tax(textboxgst) and total value(textboxtotal). How do I get the total amount textbox (textboxtotal) to automatically sum up as I enter the net (textboxnet) and gst (textboxgst) amounts?
View 4 Replies View RelatedI want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 4 Replies View RelatedI'm so proud of how i managed to get my first VBA project working. Yet there is one thing that's missing:
I would like to know how i can get the data entered in the cells to the left actively show in the textbox to the right.
Because i want to make a standard solution that can be copy pasted from the text field easily.
Screenshot of current VBA project.
I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 1 Replies View RelatedI am having issues with transferring values of textboxes of a userform to the cells of a worksheet ...
Code:
Sub dtron1()
Dim wshgroup As Worksheet
Dim Firstrow As Long
Dim Lastrow As Long
Dim mrow As Long
Dim Lrow As Long
Set wshgroup = Worksheets("Group_Data")
[Code] .........
Say you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
Sub Rename_click()
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
End With
Next i
End Sub
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
End With
Next i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
I know that I can enter =$A$1 in a text box. But is there any way to concatenate more data with it. I would like to hase something like.
="Bill " & $A$1 & " Gates"
but Excel will not allow.
In the userform I have several textboxes with default values. There are five text boxes that the user can modify and three whose values I want calculated based on the values of the five modified. This is how I initialized the userform :
Private Sub UserForm_Initialize()
Workbooks("Main.xls").Activate
A_BB_and_HBP.Value = Worksheets(5). Cells(2, 35).Value
A_H.Value = Worksheets(5).Cells(2, 36).Value + Worksheets(5).Cells(2, 37).Value + Worksheets(5).Cells(2, 38).Value + Worksheets(5).Cells(2, 39)
A_2b.Value = Worksheets(5).Cells(2, 37).Value
A_3b.Value = Worksheets(5).Cells(2, 38).Value
A_HR.Value = Worksheets(5).Cells(2, 39).Value
Worksheets(5).Cells(2, 41).Value = A_BB_and_HBP.Value
Worksheets(5).Cells(2, 42).Value = A_H.Value
Worksheets(5).Cells(2, 43).Value = A_2b.Value
Worksheets(5).Cells(2, 44).Value = A_3b.Value
Worksheets(5).Cells(2, 45).Value = A_HR.Value
A_AVG.Value = CStr(CSng(A_H.Value) / (130 - CSng(A_BB_and_HBP)))
End Sub
Then I have :....................
When the user changes A_H, A_AVG remains at its default value.
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎
I am having difficulty trying to find a walkthrough or any other information on how to pair a spinner box to a textbox. Preferably I would like it to show 12:00 and move in 15 minute increments and I seem to be hitting many roadblocks and errors.
View 1 Replies View Relatedit is possible to join the values from two seperate text boxes into the same text box on the same userform?
View 1 Replies View RelatedI have a userform with 10 textboxes which will all contain a time in HH:MM format. Could I have the userform to fill the textboxes with a default value once a time has been entered into textbox1. I would like the default value to be the time from the previous textbox plus 30 mins.
eg. So if I enter 14:00 into textbox1 I would like textbox2 to display 14:30, textbox3 to display 15:00.
If this is possible, could I add a Listbox with the options 1 to 10. Then would I be able to only uses the textboxes based on the number selected in the listbox. So if I selected 2 then just Textbox1 and Textbox2 would have values in them. For 8 being selected then Textboxes 1 through to 8 would be filled.
I've created a variable number (i) of text boxes at run time (i also named them, "txt"&i, at the same time), i'm now trying to get the values entered in these to fit into a column that has been inserted during the same sub routine. I'm having a bit of trouble refering to the text boxes though, this is the patch of code i'm struggling with:
Dim TextBox As String
For i = 0 To 2 * NumVar - 1
TextBox = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i
I also tried this:
Dim TextBox As Object
For i = 0 To 2 * NumVar - 1
TextBox.Name = "txt" & i
ActiveCell.Offset(i, 0).Value = TextBox.Value
Next i