Add A Standard Footer To An Existing Worksheet
Aug 18, 2008
My company has a lengthy confidentiality footer that must be added on every worksheet of every workbook. I often receive existing worksheets where I need to add this footer. Is there a way to quickly/automatically add it without affecting the other existing page set up features (e.g. page orientation, margins, etc.)?
I've searched the forum and found something similar that was answered with a Before_Print Event - however I need to ensure this is on all worksheets, even if they are never printed.
The footer is: Confidential Use Only. Disclose and distribute only to XX employees having a legitimate business need to know. Disclosure outside of XX is prohibited without authorization.
I would like it centered in an 8 pt font with a hard return after each sentence end.
View 9 Replies
ADVERTISEMENT
Jan 7, 2014
Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
View 2 Replies
View Related
Mar 26, 2013
I am trying to add the sheet name to the center footer for each worksheet in a workbook. The workbook has about 80 sheets and it is cumbersome to do this manually. I am using Excel 2010.
I have tried to record a macro capturing what I do manually, but when I run the macro on another sheet, it does not add the sheet name to the center footer.
I have tried searching for a macro online and the ones I have found just crash excel.
I know I am probably missing something obvious in my macro code.
View 4 Replies
View Related
Sep 2, 2013
The new worksheet is created to the left of the existing source worksheet.
View 2 Replies
View Related
Aug 23, 2006
One of my work colleagues need to add a worksheet to an existing Excel Spreadsheet which has VBA behind it, but the worksheet is password protected. The developer who wrote the application has now left, so we have no idea what the password is. Is there anyway of getting round it, like cracking into the spreadsheet to find out the password, or another way?
View 2 Replies
View Related
Feb 11, 2009
I have code in a worksheet that creates a new worksheet when clicking a button:
View 3 Replies
View Related
Sep 25, 2009
I'm using a button in my sheet to jump around to standard locations in each worksheet. Generally in the active worksheet I have these three buttons working perfectly.
However I have one button that takes you from the worksheet into the dashboard. The problem is if you had scrolled the dashboard around you may be put at your last place. I want the screen to jump to and center on R1C1
View 4 Replies
View Related
Sep 26, 2006
I would like to Import a Text file into a current Workbook with the worksheet name GLFBCALO. The macro below creates a new workbook instead of imported the data to existing sheet, GLFBCALO. Is there a way to use the OpenText method to import data into an existing worksheet?:
Public Sub ImportOKdata()
Dim MyFile As String
Dim ColumnsDesired
[Code]......
View 3 Replies
View Related
Oct 18, 2008
How do I insert an existing worksheet (previously exported from the same workbook)? I need to be able to do it programmatically.
View 10 Replies
View Related
Oct 4, 2011
I need a macro to add a work sheet template to an existing work book, I can add a blank work sheet no prob but it needs to be a template
View 3 Replies
View Related
Dec 20, 2009
this is the macro code I am using to copy the currently selected worksheet to an existing workbook:
Sub test2()
Workbooks.Open Filename:= _
"C:Documents and SettingsManagerDesktop PS444Log.xls"
Windows("PS444.xls").Activate
Sheets("sales").Select
Sheets("sales").Copy Before:=Workbooks("PS444Log.xls").Sheets(1)
End Sub
The source workbook is named PS444
The receiving workbook is named PS444Log
The sheet to be copied and moved is named sales
The source workbook is already open and the code is executed by clicking a button on the worksheet.
If I perform the steps manually the worksheet in the source workbook gets copied correctly into the receiving workbook.
The problem lies when I try to execute the code, the source worksheet doesn't get copied to the receiving workbook.
The receiving workbook gets opened but the worksheet does not get transfered.
Neither of the workbooks are protected nor are either of the worksheets protected in the workbooks.
Can someone tell me why the code is not copying the sheet to the receiving workbook.
I developed the code using the macro recorder so I don't understand why it doesn't work.
View 9 Replies
View Related
May 30, 2007
I have a user who is trying to use <EDIT><MOVE OR COPY SHEET> to copy a sheet to an existing workbook. She has them in the same directory and has them both open, but when she tries to copy a sheet from either of them to the other, the only workbook listed in the "TO BOOK" drop down menu is the one she is in. NO other workbooks show up as an option for her to copy to.
View 12 Replies
View Related
Feb 17, 2009
I am working on this estimating template. To be used on Excel 97, 2000 and XP systems.
I have a few issues i am unable to resolve.
There are 2 of the worksheets (Short Quote and Stores Req) which individually need to have a button on them so i can create a new workbook as an exact coy of that sheet. but with just the values and not the formulas.
Also i am unsure on the macro on the workbook currently( as i dont know how to do macros) i dont know what it does?
View 7 Replies
View Related
May 2, 2009
I have created a form in VBA using txt boxes and cmd's. I want the abitility to edit the existing data on my excel worksheet using the form. Currently, I can add data, but not search through the existing data on the form.
I have been using the excel tips and it has been great, but I am stumped at this point. This is my first time to every post a message.
View 4 Replies
View Related
Jan 11, 2013
I'm attempting to add a variable number of worksheets (dependant on the number of entries in an existing list), then rename those sheets to the name of the entries in that list. i.e.
LIST
A
B
C
With the list above, i'd want 3 new sheets added, one named 'A', one named 'B' and one named 'C'.
The trouble i'm having is that because the number of entries/sheets varies, i don't want to refer to 'Sheet1' 'Sheet2' etc. to rename them.
***Additional Info*** the first record in the list is always "W4" on sheet "Data"
Below is where i've got to so far (however, i'm pretty new to this so it's almost certainly not all that efficient!)
Sub setup_1()
Sheets("Data").Select
Range("W4").Select
[Code] .......
View 2 Replies
View Related
Mar 7, 2014
What I need:
-Master worksheet copy/populate child worksheets at the press of a button or automatically if possible.
-If copy pasting, it needs to overwrite the original data and not just duplicate it underneath in the child sheets.
-I tried using the code from "[URL] ......" but could not tweak it quite how I wanted.
-Any unique values without a child sheet, just ignore and leave in the master sheet or ideally add them into their own child sheet
I have multiple other macros going. Some details about my sheet:
-My table headers and filters come down to "A13:R"
-All my information starts on "A14:R" which is what I want sorted. All of my worksheets have the same heads/locations.
-The column "I" is where I want to take my info for sorting from. For example "I14" = grapes, "I15" = apple, "I16" = grapes. etc. So i would like all the apple rows to automatically go to the "apple" worksheet and the grape rows to the "Grape" worksheet.
View 9 Replies
View Related
Jan 24, 2014
how do i go about creating a macro to copy a range in sheet 1 in workbook A and paste that to a new tab(the last one) in the existing workbook B. i would like the tab to be renamed based on a cell value. preferably workbook B doesnt have to be open, and the save and close it
View 6 Replies
View Related
Sep 12, 2009
I am trying to apply named cell from another worksheet to existing formula.
For example I have a formula in sheet2 which looks like =sheet1!A1+sheet1!B1. I then subsequently name sheet1!A1 = Jan and sheet1!B1 = Feb. Thinking that if I apply these names the formula in sheet2 would look like =Jan+Feb. However I get the message "Microsoft Office Excel cannot find any references to replace" when I try to apply the names using Excel menu "Insert - Name - Apply".
View 4 Replies
View Related
Apr 5, 2013
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
View 1 Replies
View Related
May 30, 2013
I would like the following code to be run for all those sheet/s that has a name = "single" (Not case sensitive neither an exact match) of my active workbook.
Code:
Sub UIUIUI()
Dim LR As Long, i As Long
LR = Range("I" & Rows.Count).End(xlUp).Row
For i = 1 To LR
With Range("I" & i)
If .Offset(, -1).Value = 1 Then .Value = .Value & "-"
End With
Next i
End Sub
View 3 Replies
View Related
Sep 5, 2013
- Construct a macro to import a csv-file to my worksheet named "Info". The data in the .csv-file should start in row A5 in my worksheet.
- If the worksheet "Info" already has data, I want to overwrite the existing data with the new data starting in row A5
The directory of the csv-file is C:Testmycsvfile.csv
View 3 Replies
View Related
Aug 8, 2012
I inherited a spreadsheet to manage that is linked to a SharePoint table.
It is trying to populate a date that a certain "Tier" is selected (1, 2, 3, or 4).
It works great if I manually type in the tiers, but does not run on existing data (about 400 records) or lines that are updated and new via the SharePoint list.
How can I have this run on all of the existing lines and anything added or changed in the future from the list?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("AD2:AD10000")) Is Nothing Then
Application.EnableEvents = False
[Code] ....
View 9 Replies
View Related
Sep 19, 2013
I have been using this code and just noticed that it resets all of my options buttons to false when I exit and then re-enter (activate) the sheet with the option buttons.
I see where this is going on, but don't know how to correct it. I only want the option buttons changed to false if
The Sol named range is something other than "Primary Vendor". It seems to call the macro ClearOB whenener the sheet is activated.
Private Sub Worksheet_Activate()
If Range("Sol").Value = "Primary Vendor" Then
For Each OB In ActiveSheet.OptionButtons
OB.Enabled = True
Next OB
ClearOB
ActiveSheet.ScrollArea = "A1:K58"
[Code] .......
View 1 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Dec 17, 2013
I have a problem where I extended a formula down to over 40,000 records which has increased the file size substantially. I only need it to scroll down to a few thousand rows now that I realized that there is alot less data to populate the worksheet. Is there any way to get it back to a scroll range that is more modest in size?
View 1 Replies
View Related
Jun 18, 2004
Is there any way to put a formula into a footer OR have a footer read the contents of a particular cell on that page? The standard buttons for your footer does not allow this. How can I make this happen?
View 4 Replies
View Related
Sep 18, 2009
Is there any way in excel 2007 to define a standard header and footer on the first sheet and use the same header and footer for all the remaining sheets within the workbook (same font and style as in first page).
Since I have around 25 sheets within the workbook i cannot do formatting and copy paste all the time. This will save my time alot.
View 2 Replies
View Related
Mar 25, 2009
I've been trying to figure out how to tell my left footer to automatically use the value of whatever "L2" is. How do I do this?
View 7 Replies
View Related
Jan 1, 2013
how to add footer with file path name to all worksheets of a workbook. I m adding one by one and my workbook has more then 110 sheets.
View 5 Replies
View Related
Jan 9, 2010
I am facing problem with my footer, which is as under:
___________________________________________
E-mail: xxx_yyyy@somewhere.com
My footer should be printed at the bottom of my paper as shown above. But, as expected, when I change margins of page or even change the printing preference, like best print to draft print or like that, it goes changing like this:
________________________________________________E
-mail:xxx_yyyy@somewhere.com
or like this:
_________________________________________________
__E-mail:xxx_yyyy@somewhere.com
So, it become headache for me. i have to first see the print preview and then after I can go for printing. How to deal with this problem?
There should be two lines in footer: first will have _____________________________________only and the second one will have E-mail:xxx_yyyy@somewhere.com
View 9 Replies
View Related
