Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
Is it possible to use the number within a cell as the footer or header? I have a column of numbers and want to show the total of this column within the footer.
View 9 Replies View RelatedI have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
My company has a lengthy confidentiality footer that must be added on every worksheet of every workbook. I often receive existing worksheets where I need to add this footer. Is there a way to quickly/automatically add it without affecting the other existing page set up features (e.g. page orientation, margins, etc.)?
I've searched the forum and found something similar that was answered with a Before_Print Event - however I need to ensure this is on all worksheets, even if they are never printed.
The footer is: Confidential Use Only. Disclose and distribute only to XX employees having a legitimate business need to know. Disclosure outside of XX is prohibited without authorization.
I would like it centered in an 8 pt font with a hard return after each sentence end.
I am trying to add the sheet name to the center footer for each worksheet in a workbook. The workbook has about 80 sheets and it is cumbersome to do this manually. I am using Excel 2010.
I have tried to record a macro capturing what I do manually, but when I run the macro on another sheet, it does not add the sheet name to the center footer.
I have tried searching for a macro online and the ones I have found just crash excel.
I know I am probably missing something obvious in my macro code.
I have a worksheet with additional worksheet name listed in Column G, starting in G3.
I want to run this formula on each sheet, using the value in Column G as the WORKSHEETNAME.
=COUNTIFS(A7:A1000,">12/31/2010",A7:A1000,"<1/1/2012",F7:F1000,"Excluded")
Faulty example of what I'm trying to do:
=COUNTIFS('WORKSHEETNAME'!A7:A1000,">12/31/2010",''WORKSHEETNAME'!A7:A1000,"<1/1/2012",''WORKSHEETNAME'!F7:F1000,"Excluded")
I've tried INDIRECT, but I cant seem to make it work.
I have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
'Worksheets.Open Filename:=DataRawSheet
'ActiveSheet.Range("A1").Select
Reference_Cell_to_Sheet.xlsm
I've done this loads of times before but doing it this morning seems to not be working at all.
Previously I'd be in Sheet 1, I put the equals sign, I click into Sheet 2 in the cell I want, hit enter, and hey presto the external cell is referenced in Sheet 1.
However, what I'm trying to do here is not reference individual sheets within an excel document, but reference a totally separate Excel document. Can I do this or not?
If so how? Because when I select the second worksheet after I've entered the = sign, it just takes me to the second sheet - it doesn't seem to 'remember' that I'm in the middle of a formula.
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
View 5 Replies View RelatedI'm trying to reference a cell on another worksheet in my criteria and the formula doesn't seem to be working. All I get is a value of 0.
= SUMIF(G3:G76, ">='City Wide'!B6",I3:I76)
If I replace 'City Wide'!B6 with an actual number the formula works. This does not help as 'City Wide'!B6 is a value that can change.
I am trying to open a stored file on a network drive (with the file location stored in cell E4). When I try to run the macro, I get an error message on Line 3. (Sheets(E4.Value).Activate)
Does anyone know what I can do to fix this, or have a better method to open the closed files?
I've read that it's possible to reference information from a closed sheet, but I don't think that I'm experienced enough in VBA to take on that effort yet.
I've been tasked with redoing a revenue report at work, and in my head I've conjured up what could potentially be a huge time saving way of doing things in the future, although have searched help files and looked around online and can't find the formula/macro (if it exists) to enable me to do this.
The problem is this:
Sheet 1 of the workbook is a large input sheet. Every row contained in that sheet will, in column A, be titled 'red', 'yellow' or 'green'. Columns B onwards contain other data which (at the moment) is irrelevant to the problem.
Now what I want excel to do after I've put the raw data into the input sheet (sheet 1), is to read the text in column A for each row, then automatically copy ALL data in that row over to the next empty row on another worksheet.
ie Sheet 2 will have all rows that have 'Red' in column A on the input sheet, Sheet 3 will have all those titled 'Yellow' and Sheet 4 will have all those titled 'Red'.
I know I can use a filter on the input sheet to just show the data I want, but each colour coded row will contain different data to another, and if there is a formula/macro setup i can use to do the above, then I can set the subsequent worksheets up to hide the superflous columns from the input sheet.
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
I am trying to find a way to automatically highlight all the cells specified by the cell references in a column on another worksheet (which will constantly have new values added).
On the attached sample, the 'Data Before' tab shows the base data before any highlighting. As cell references are added to the 'References' tab in 'column A' I want the respective cell to be highlighted on the 'Data Before' tab resulting in the 'Data After' tab and each time a new cell reference is added to the 'References' tab, the respective cell is then highlighted on the 'Data Before' tab.
I would like to have control over the highlight colour so that a different highlight colour can be specified for each date change, i.e. all cell references that are shown on the same date are the same colour but where the date changes a different highlight colour can be specified.
Highlight by Cell Reference.xlsx
Trying to use INDIRECT to sum the contents of a column on another worksheet upto a certain cell reference which is in another cell on the worksheet.
=SUM(INDIRECT("Sheet1!A4:Sheet1!"&B1))
I have taken it back to simply having sheet1 with numbers in A4 to A23, then sheet2 with A23 in cell B1, and the formula above it C9, but I keep getting #REF!.
The formula works fine if on sheet1 without the worksheet names in it. Formula evaluation gets to =SUM(INDIRECT("Sheet1!A4:Sheet1!A23")) then gives =SUM(#REF!)
I am trying to create a budgeting spreadsheet that contains 26 worksheets that represent 2 week expense cycles. The worksheet will tally all the expenses in its 2 week cycle, compare them to a target budget, and calculate the remaining budget. I would like to roll the remaining budget over to the next 2 week budget cycle by having a cell refer to the remaining budget in the previous worksheet.
I am trying to accomplish this using the following VBA script. I get an error (Run-time error 1004: Application-defined or object-defined error) on the 3rd to last line of the code. I think the issue is with how I am constructing the wsReference variable. I have seen other codes do something similar (VBA - How to refer to a different worksheet cell) but I am not having any luck.
Sub Budget_Rollover()
Dim i As Long
' Loop through all the worksheets, starting with the second sheet
For i = 2 To Worksheets.Count
Dim wsReference As String
Dim wsName As String
' Define the name of the previous expense cycle worksheet
[code]......
I have a macros ( code inserted ) as you can see in my code the macros save the workbook in any file name you chose just by changing the any filename option.
I would like this to be changed so that it saves based on a cell reference, say i has a name in lets say B10 i would like it to save as the name in B10.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.DisplayAlerts = False
Dim bk1 As Workbook
Dim bk As Workbook
Dim myfilename As String
I have done a search on the forum for the performing this task and I have come up with the following ....
View 9 Replies View RelatedI need to create a dynamic range based on cell between a header and footer cell. The header cell ( A8 ) will remain static, however, the footer cell starts at A10 and then will move down as rows are added.
View 9 Replies View RelatedI would like to reference Cell values in my header/footer. I currently have the following code:
[Code] ......
The problem im having is that i would like to have multiple lines in my header/footer. Eg. i would like cell A1 to be displayed on the top left, and A2 displayed on the top left, but below the A1 value.
How can I do this?
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
I've got 2 worksheets in the same workbook.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
So what I'm trying to achieve is :-
Sheet 2 A1 = Sheet 1 A1
Sheet 2 A2 = Sheet 1 A22
Sheet 2 A3 = Sheet 1 A43
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
Is it possible to have a Page Number (e.g. Page 1 of 10) directly in Cell without going to the Footer or Header.
View 4 Replies View RelatedI need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies View RelatedI have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View Related
