I'm using a button in my sheet to jump around to standard locations in each worksheet. Generally in the active worksheet I have these three buttons working perfectly.
However I have one button that takes you from the worksheet into the dashboard. The problem is if you had scrolled the dashboard around you may be put at your last place. I want the screen to jump to and center on R1C1
I have a row that contains each date for the year in B5:NB5. I would like to have a button or macro that will jump to the cell containing today's date.
View 4 Replies View RelatedI have a sheet with various pivot tables and charts, I want to have a row of buttons at the top to jump to the corresponding cell range.
View 1 Replies View RelatedWhen I hit the print button on the Standard Toolbar, I want my printer to print only the number of pages specified on my worksheet which I previously entered into Cell A1.
Is there a formula or something I can use for this?
I need the Standard Print button to print only the number of pages I've entered in Cell X1 when I click it, (and if I haven't entered any value in Cell X1, nothing should be printed.)
Now, where this gets tricky, is that I still want to be able to override this automatic number printing if I want, by selecting 'File/Print...' from the menu and choosing a different number of pages to print.
I am looking to create a macro, so from a drop down list the value chosen, the work book will open that sheet.
worksheets listed in the drop down list and then on the open sheet a back button back to the startpage.
im trying find a simple macro or vba code that when ran it will jump to todays date on the excel worksheet. something basic w/
Sub Today_Find()
<find todays date!>
End Sub
I have two worksheets that Data might be present,
Holdtickets and "another sheet"
Here is my code:
Code:
Dim i As Long
Dim LastRow As Long
Dim wsEachSheet As Worksheet
Const strDestSheetName As String = "Hold Tickets"
Const strDestSheetName2 As String = "Enter Order"
[Code] ........
I don't want to show the location as being the worksheet "Hold Tickets" so i had to remove it from the search, But the data is still important
I need a macro code that will locate the data in "another sheet" and return the values from there, but if it is also present in the worksheet "Hold tickets" then
This part of the code will need to look like this:
Code:
Sheet1.Range("B7").Value = wsEachSheet.Name & "Hold Tickets"
My company has a lengthy confidentiality footer that must be added on every worksheet of every workbook. I often receive existing worksheets where I need to add this footer. Is there a way to quickly/automatically add it without affecting the other existing page set up features (e.g. page orientation, margins, etc.)?
I've searched the forum and found something similar that was answered with a Before_Print Event - however I need to ensure this is on all worksheets, even if they are never printed.
The footer is: Confidential Use Only. Disclose and distribute only to XX employees having a legitimate business need to know. Disclosure outside of XX is prohibited without authorization.
I would like it centered in an 8 pt font with a hard return after each sentence end.
I am trying to jump over with tab key. like if i enter information in cell D6, then when I press the tab key it should jump to D8, then when i press the tab again it should go to D10.
View 2 Replies View RelatedCan VBA used to jump to cell in my worksheet the user is in C8 they enter their values in C8 and then press Enter Instead of going down they go to C14 ?
Is this something I can do with VBA
Is there a formula or macro that will allow me to click on one cell, let's say A5, and it would immediately take me down to another cell. I have a worksheet that lists, at the top of the page, a summary of the numbers entered down further in the worksheet. the whole worksheet is very long so I would like to make it so that if I click in a blank cell, to the left of the data, it would automatically drop down to the original data further down the worksheet.
View 9 Replies View RelatedIf I want to select a cell in another worksheet I'm currectly doing this:
View 3 Replies View Relatedhow do you select a worksheet using a cell value
in cell a1 i have a random number we shal say it is 57
in cell b1 the same we shall say it is 8
i need to select worksheet a1 and cell b1
sheet57!8
sheet(a1!b1)
i know this is pretty lame but why do i get an error message when i use...
Sheets("Sheet2").Select
Range("A1").Select
the error message is run time error 1004, application -defined or object-defined error.
i want to activate cell A1 so that i can use it as a location for referencing another cell using offset.
I already have a cell that uses a function to find my next empty cell
(=INDEX($A$9:$A$10000;EQUIV(1;1/(ESTVIDE($B$9:$B$10000));0)))
Everything works great, but now I made a command button to be able to JUMP to that cell number, and that's where I need help.
I want to take the cell number written inside 1 cell (like "0011") and use that to jump to that specific cell.
1. Create a worksheet for each set of tables (Sheet1: 2x table, Sheet2: 3x table etc)
2. In field A3 (e.g.), I'd type (Formatted as text): 2x1=
3. In field B3, he'd have to type the answer. To prevent him from using the cell as a calculating tool, it will be formatted as text (courtesy of Prevent Someone From Entering A Formula In A Cell)
4. He'll start the test by clicking a button that says "START THE TEST" (or something more exciting, like "Earn some money!"). I'd like a macro to select the first cell (This I can do, believe it or not! :-)) and then, after, say 5 seconds, jump to the second cell, then the third etc up to the last cell (2x13=)
5. Despite the timer, the active cell must be allowed to be changed to the following one (one down) by pressing "Enter" (In other words, if the timer is set at 5 seconds and Jonathan enters the answer in 1, he may then press enter and move to the following cell immediately)
5. He can only enter the answer in the cell while highlighted and I'll have the whole sheet protected once the macro has done its run to the end or once he's answered the final question and pressed "Enter".
I want to jump from one cell position (on picture, marked with numbers from 1 - 6)
But i want to jump to them respectly(first to 2, then on 3....) I have used these numbers just to describe space between cells(in rows and columns), and actually those are blank cells! Starting blank cell can be everywhere(e.g. A2), it doesnt matter, it is only important how to jump from one cell to another in mentioned manner!!!!!!!
the attached workbook, I am looking for M19, N19 & O19 to read from different locations depending on how many cells are called on when info is entered in P8.
View 10 Replies View RelatedI made an analysis table that shows a list of prices on a certain company. I have a table on one worksheet and I made a chart (from that table) on another worksheet. I'm using an in-cell drop down list on the table worksheet to change to different companies. Is there a way that I can put the same drop down list on the chart worksheet? Essentially, I want to be able to switch the company on either worksheet and have it change on both worksheets. I'd like to keep the chart and table uniform and running together.
View 6 Replies View RelatedI'm using the following code. It works fine when it comes to selecting the cell. However, I'm not sure how to bring the view of the worksheet such that the selected cell is in the middle of the sheet. I've the data horizontally laid out from column A to column BM. So, when someone makes a change in Sheet2 I need to point to the corresponding column in Sheet1 such that it is in the view.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim CellName As String
CellName = Range("A1").Value
[Code]....
I seem to running into dead ends with each previous post concerning this similar idea, despite brave efforts of kind people . . .
So here is another thought: As the title suggests, can one help me with code that would take the value in (say) Sheet1A1 (Say Harry) and use that value to search for a sheet with that name (Harry) in the same workbook and then link to that sheet, cell A1 (Harry!A1)?
The other posts are here, should you want to know, but they differ as far as the linking method goes:
Post 1, Title: Newly created Tab Names placed as Hyperlink on Content Sheet
Newly created Tab Names placed as Hyperlink on Content Sheet
Post 2, Title: Automatically redirect hyperlink when cell value changes
Newly created Tab Names placed as Hyperlink on Content Sheet
I am trying to write a macro, in VBA, that would select the proper worksheet, based on the value of a cell.
View 3 Replies View RelatedOn Sheet1 I always enter information into Cell X1 first, then hit Enter. Now I need to continue entering data into Cells B10 through B75. Is there a way to set Cell X1 to jump to Cell B10 after I hit Enter?
View 14 Replies View RelatedIs it possible to jump from one cell to another once a certain number of lines/characters has been reached to continue entering information uninterrupted with a macro?
Example: Cell A37 holds 10 lines with 78 character spaces on each line. Anymore than that is hidden. I would like to jump to cell A61 automatically when A37 reaches that limit to continue entering information without having to stop and click on A61. Is this possible?
is it possible to create in Excel something similar to the text box you have when you enter the product key on the text boxes?
like for example, when you need to type 1997 as your id.
when you typed "1" in A1, cursor will automatically move to B1.
when you typed "9" in B1, cursor will automatically move to C1...
and so on..
thus, user that fill in the form does not need to press enter, or right arrow key when inputting their id.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I have a spreadsheet (70 columns numbered 1-70 x 200 rows (1-200) and I need to highlight specific cells using the respective co-ordinates i.e. row x column which I have in separate columns.
I want to know how to find certain String and select the cell it on finding the String.
View 10 Replies View RelatedI need to select a worksheet from another workbook.
I want use a cell contains which contains a date that corresponds to the worksheet's name in the other workbook.
