i am already using a formula in which i need to add a condition.
Existing formula - =IF(ISNUMBER(MATCH(K4,{"Cancelled","On Hold","Onboarded","Open","Profile Available","Profile shared","Rebadge"},0)),IF($AG$1+X4>T4,$AG$1+X4,T4),R4)
i need to replace R4 (at the end of the formula) with this condition - if (R4>T4),R4,T4
I want to change country name 'California' and 'Belziuma' with new country name as 'USA' in column B2.
Similarly change country name 'Moscow' with new name 'Russia'.
If cond not working.
I have a simple problem I am trying to find a set a values on a column and what to replace once found with the first 5 most left characters. Example:
in column A I can have text and numbers; the numbers that I want to find are in the following format xy:zw / xy:zw on each case the values can be from 0 to 9 so this is tons of posible combinations, I been trying to use **:** ? **:** but I don't get none. This is what I am doing
Set target = Sheets("Sheet1"). Range("A1:A9000")
For Each cell In target
If cell.Value = "**:** ? **:**" Then cell.Value = "00.00"
Next cell
A example would be 02:47 / 03:15 the next row could have 03:15 / 04:09
and so on however I could have text in some rows. In reality I would like to find and replace the cell.value with the Left 5 characters if the cell contains ANY value maching that format. Text in that column will never have that format combination
I want to append / replace data in cells depending on the initial data.
A cell has the value 3AB00456 XYZ
I want to append the value with My
I want to check to see if the 4th & 5th characters = 00
If YES, I want to append the value with My and replace the rest with just the the 1st 3 characters So the final value would be My3AB
If NO, (the cell has the value 3AB02456 XYZ) I want to replace with a hyphen after the 3rd character and then the rest of the cell value. So the final value would be My3AB-02456 XYZ
I have several worksheets each with a column of about 2000 cells. I want to replace the data in the cells and not create another row with the result.
I have a column of over 20,000 rows, showing employee hire dates. For the purposes of a specific calculation, I want to replace all the hire dates that are prior to 1/1/2011 with 1/1/2011. Is there a simple way to do this all at once with a Replace statement in my code without having to look at each record individually?
I know how to replace one specific date with another all at once, but I don't know to do it when I'm looking for more than one specific date.
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Code:
Namesalary Bonus Check
XX1000 2 FN
XY900 1 NA
YY1100 2 FN
ZY1500 3 DP
ZZ1250 2 FN
AA1050 2 NA
AZ 950 1 FN
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
Code:
SALARY DATABASE
Name SalaryBonus
What I want to do is that ---it copy all the data which fullfile condition FN and move to the Sheet 2 which is salary database. Two important things to check is that. IF name already exists in the sheet 2 then it replace old info with the new one. Second thing is to sort the whole table(Salary database-sheet 2) according to A-Z (Name column). I use office 2003. I hope I provide all the information.
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
I am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
This task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
I'm looking for a formula or criteria within a formula to prevent a cell from recalculating or just causing it to revert to a value if another cell becomes populated. Something like =IF(NOT(ISBLANK(xx)),STOPCALC(xx),...
I'm trying to determine some weighted week to week projections and I want to be able to determine the accuracy of the projections without them being influenced by the actuals once they show up (the projections use historical actuals and related data which are all in the same range where the futures will come in). Also hoping for a shortcut to do what I described without having to manually go in and stop the (thousands of) cells from recalculating since the actuals for a given periodicity arrive staggered and not at one specific time.
i have a string "251423,a" in cell A2. The formula in cell C2=A2. except for in C2 i want the value to read "251423.a" instead of the ",." the string is not always the same length. so really what i need to replace the ",' with a ".' in a formula.
View 5 Replies View RelatedI am creating a IF(... formula, here is what i have so far...
=IF(B3='Max' AND C3='Sell', D3-J17,0)
I have two drop down boxes, one at B3 and one at C3, i want to D3-J17, but only when B3 = Max and C3 = Sell, otherwise 0 (really instead of 0 im gonna add in more formula for the rest of the drop downs, but for arguments sake lets say 0), what do i do?
I want to replace a part of a formula with its value.
eg say I have a formula =vlookup($a55,$a$2:$e$50,column(),false).
I want to replace column() with its value. There will be plenty of cells with this formula What can be the best way of achieving this.
I have a spreadsheet with 2 columns (let's pretend), the first column uses Data Validation for a dropdown list. The second column contains a formula that references the 1st column and uses lookup:
=IF(A35<>0;LOOKUP(A35;NewCons;NewGroups))
So as soon as a value is selected in column A, column B changes to display a value.
Rather than just displaying this value, I would like the cell in column B to be completely replaced by this value, so goodbye to the formula.
Is there a way that I can do this? Will I need to go and study how to use macros?
He works at state tax administration. He had this formula at work to calculate income tax.
View 3 Replies View RelatedI have been having a problem with the worksheet (attached) and was wondering if anyone could give me any help.
I will explain the purpose of the sheet etc first and what it does at the moment:
This work sheet is to record peoples projects, hours related to those projects, and calculate their availability 37.5-(project hours+pto) for Belfast and dublin and 40-(project hours+pto) for chicago, and also their utilization which is =((37.5-Availability)/37.5)*100 for belfast and Dublin and ((40-Availability)/40)*100 for Chicago.
When a project is added I am currently going in and updating the formula for that person to incorporate the new row which their project is on, this is proving to be quite time consuming, and I was wondering if there were any macro’s that could be used so that it would search for a name on the first column and use each of the hours that are in the column for the given week to calculate the availability?
The utilization is not a big problem as it just uses the availability so as long as the availability is correct then the utilization is correct..
If there is not a macro do you know of any way this can be automated so that I do not manually have to add to formula for each cell when a new row is added with a project and hours?
I am trying to modify a cell formula with the Replace function.
Code:
The Formula in the target cell =
='C:Documents and SettingsHoliday macro[Holiday2011.xls]Year 2011'!C5
I am using the below code but it returns just the end portion ='Year 2012'!C5
where I expect just the year to change
='C:Documents and SettingsHoliday macro[Holiday2012.xls]Year 2012'!C5
Where last year = 2011
Yr=2012
Range("C3").Formula = Replace(Range("C3").Formula, LastYr, Yr)
I really would like to alter about 1000 lines of formulas. Here's a sample of the code.
Code:
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U7,AD289*$AE$37))
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U8,AD290*$AE$37))
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U9,AD291*$AE$37))
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U10,AD292*$AE$37))
[Code] ....
*****The last line of code is below*****
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U966,AD1248*$AE$37))
What I'm really trying to do is replace all the numbers (well, max of 3) after the U part to U6.
So,, for example ,, if in the code it shows MIN(U16,,,,,,,, I want it to show MIN(U6
So as an example
Code:
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U966,AD1248*$AE$37))
WILL NOW BE
=IF(COUNTBLANK($AE$6:$AE$7),"",MIN(U6,AD1248*$AE$37))
So U6 is in all the formulas.
I've tried searching on google,, saw a video here on UTube;
Excel Magic Trick 519: SUBSTITUTE & REPLACE Functions
[URL] ........
Showed some great stuff,, but I just didn't quite get it for the above.
I would like to know if it is possible to complete a "Find and Replace" but replace with a formula as opposed to a value?
View 9 Replies View RelatedI am looking for the macro which can replace cell value with his first row. e.g. Column D contains the cell value "X" and i want to replace that value with D1. The same i am looking for all field.
View 5 Replies View RelatedI have a formula copied across my worksheet to reference relative cells as below:
Code:
{=(SUM(IF('Std Days'!$D$3:$BO$3=Days!P$5,IF('Std Days'!$B$4:$B$65=$N7,IF(P$6>($L7-DAY(DATE(YEAR(P$5),MONTH(P$5)+1,))),IF(P$5
I need a formula in i.e F3 ... that will check cell G3 to see if there is any values in this cell... If yes... I need the values in G3 to be replaced with "1year" if false .. then "".
View 9 Replies View RelatedI have text in column 1 and need a formula that will replace it with text in column 2, as shown in (fig 2).
FIG 112X Jan 2009 7.5000 put X Jan 2010 5.0000 callAA Jan 2010 17.5000 call AA Jan 2009 9.0000 putIBM Jan 2010 130.0000 call IBM Jan 2009 17.5000 put PLCE Jan 2009 30.0000 call PLCE Feb 2010 7.5000 put
FIG 212X Jan 2009 7.5000 put X Jan 09 7.50 putX Jan 2010 5.0000 callX Jan 10 5 callAA Jan 2010 17.5000 call AA Jan 10 17.50 call AA Jan 2009 9.0000 putAA Jan 09 9 putIBM Jan 2010 130.0000 call IBM Jan 10 130 call IBM Jan 2009 17.5000 put IBM Jan 09 17.50 putPLCE Jan 2009 30.0000 call PLCE Jan 09 30 call PLCE Feb 2010 7.5000 putPLCE Feb 10 7.50 put
how i can search #N/A , #values error in a work sheet and replace with 0. i tried with find and replace dialague but it seems not recognizing error values.
View 2 Replies View RelatedI have a column called Average and it have numbers from 0 to 100. I want to set a string on another column based on the value of Average. The condition is
< 50 is negative
= 50 is neutral
> 50 is positive
For example
Column A Column B
45 Negative
50 Neutral
80 Positive
I'm trying to construct a formula which contains an =IF and what I think needs to be INDEX, but cannot be 100% certain as I've never done.
I can't post a sample of the workbook due to company policy, but here's what I'm trying to do:
In Cell b2
I have written this code to add a column to the data. but it is giving application defined error how to resolve it??
[Code] .....
Using Excel 2003. I have a very basic SUM formula I am using to show how many forms are still in-house. Pretty simple.
Column D is how many came in.
Column F is how many were completed.
Column E is what is left.
To get the daily count I take the previous day's Column E, add to today's Column D and subtract today's Column F.
=(E2+D3-F3)
Puts the results in E3.
This formula is copied on down the worksheet which results in:
=(E3+D4-F4), with the results in E4. And so on down Column E.
The problem is that if there is no data entered in Column D or F, the results from E are carried (copied?) as far down as the forumla. i.e., if today's column E results in 4, then that is displayed for as far down as I have copied the formula. What I'd like to do is set the formula so that if there is no data in columns E or F, then there is nothing displayed in Column E.
Add a condition to this formula Let us assume for the column (classes) and the condition is selected from the cell "G1"
Condition E2: E30 = G1
ID
NAME
CODE
Birthday
[Code]....
ColA-ColB-ColC- Z
a1 - b1 - c1 -1
a2 - b2 - c2 -2
a3 - b3 - c3 -3
if there a formula to check all the rows,
in cell a1,
if a1=a1, b1=b1, c1=c1, it'll return 1
if a3=a3, b3=b3, c3=c3, it'll return 3
I checked the formula below, from how I read, it only check for 1 condition...
=IF(COUNTIF(db!$G:$G,nvT!E6),INDEX(db!$H:$H,MATCH(E6,db!$G:$G,FALSE),1), "0")