Add Single Column To Defined Print Range
Dec 6, 2013
Currently i have a macro that prints range column A to O but i need to add column AD on the end of the O so in effect Ii would get A:O & AD. Current macro is below:
Sub PRINT_CALL_OFFS()
'
' PRINT_CALL_OFFS Macro
Sheets("DFS Result").Range("A:O").PrintOut
Sheets("CAR Result").Range("A:O").PrintOut
Sheets("ACU BOS(Z1)").Range("A:O").PrintOut
Sheets("ACU LON(Z2)").Range("A:O").PrintOut
Sheets("ACU MIDS(Z3)").Range("A:O").PrintOut
Sheets("ACU SW(Z4)").Range("A:O").PrintOut
Sheets("ACU WALES(Z5)").Range("A:O").PrintOut
Sheets("ACU SOTON EXP").Range("A:O").PrintOut
End Sub
I have tried adding & AD as follows:
Sheets("DFS Result").Range("A:O" & AD).PrintOut
However this doesn't work.
View 5 Replies
ADVERTISEMENT
Mar 25, 2014
formula that would count the instances in Column C, where Column A contains "LH" or "RH" as part of the word, and column B equals "Either".
View 5 Replies
View Related
Feb 14, 2007
I have a spreadsheet with 28 visible tabs. When I select all tabs and print, I get 3 cover (or banner) pages...I like having the first banner page, but the other two are in the middle of my report. I assume excel is sending 3 print jobs and I'm not sure why.
I've seen a couple of posts regarding this issue when using VBA, but I'm not using VBA...just selecting all the sheets and sending a single print job, but get 3 banner pages.
View 9 Replies
View Related
Oct 4, 2006
Trying to add a named range at run-time
Here's what I have so far ...
View 9 Replies
View Related
Jun 9, 2009
I am having some trouble with a variable range selection within a regression. I keep getting an "application-defined or object-defined error." I've isolated each statement to find that the code that is causing the regression not to work is below (the error for that line of code states that the Select method of Range class failed):
View 6 Replies
View Related
Feb 26, 2009
this is the line it gives the error on.
Range("A1").End(xlDown).Offset(1,0).Select
View 9 Replies
View Related
Jun 5, 2009
So I'm correcting macro at work and keep running into this error:
"Application-defined or object-defined error"
View 5 Replies
View Related
Apr 8, 2008
I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies
View Related
Oct 25, 2013
I have a named range that is 5 columns wide by 100 rows. On another part of the spreadsheet I want to have a column point to just one of the columns of that range. How can I reference that column using a cell formula? I have a lot of these all over my spreadsheet, so i don't want to have to assign each individual column its own name.
View 2 Replies
View Related
Apr 11, 2007
what's the quickest way to convert an array (range) of data to a single column?
I have varying numbers of rows with varying cells of data in each row. I need to quickly compile (transcribe?) all the data into a single column.
View 9 Replies
View Related
Apr 29, 2008
Assume A1:A10 filled with the characters A to J.
I'm looking for a way to return the letter "C" when 3 serves as the index_num BUT I do not want to present all 10 characters in the formula.
I would like to use the range A1:A10 =Choose(3,A1:A10) or, if applicable, to name the range as DATA and then use: =Choose(3,DATA)
I tried all I know, including INDIRECT - but found no solution [is there any ?]
As I'm familiar with all workarounds - I will appreciate replies that use CHOOSE.
View 9 Replies
View Related
Jun 25, 2008
I am looking to create a macro that will ask the user to define the row number of the beginning and ending locations that they would like to print. The columns are fixed in that the first starting row will be from column A and the ending row will be column M.
I have built a pipe tally used in the oilfield that keeps track of large amounts of pipe figures but very often is the case that there is the need to print a section of the tally data in reference to a certain depth. With the vast knowledge base located here I was able to build the first macro that prints the whole active tally but now I need something more refined.
Below is one of the copies of the macro that I was trying to get to work and it is missing a couple of things but the most important part shows up and that is how to get the inputbox variables into the defined print area.
Sub TallyVariable()
Dim StartRow As String
Dim EndRow As String
StartRow = InputBox("Please Enter Starting Row you would like to print")
EndRow = InputBox("Please Enter Last Row you would like to print")
ActiveSheet.PageSetup.PrintArea = "A" & StartRow.Address:"M" & EndRow.Address
End Sub
View 9 Replies
View Related
Mar 30, 2013
How can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".
View 9 Replies
View Related
Jun 10, 2014
I need to delete a certain range of Rows in a single column
View 3 Replies
View Related
Mar 7, 2008
I have numbers in a range over an indeterminate number of rows and 6 columns. I want to create a single column of the numbers with no blank cells in between. It's to check Visa receipts from different depts.
View 2 Replies
View Related
Mar 25, 2008
I'm trying to separate a cell containing:
TSB w/6.5% NaCl - NS 29002TSB w/6.5% NaCl - NS 29003TSB w/6.5% NaCl - NS 29004
into a 2x3 table, in another sheet, like this:
TSB w/ 6.5% NaCl NS 29002
TSB w/ 6.5% NaCl NS 29003
TSB w/ 6.5% NaCl NS 29004
TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items
View 7 Replies
View Related
Dec 4, 2007
I want to select a range in a spreadsheet and then set it as the print area. the last column I want to be selected is contains the text data "ABC" in row 1 and is the only column with data "ABC" in row 1. The last row I want to select contains the text data "DEF" in column 1 and is the only row in column 1 containing the data "DEF". Basically I want to select the range [A1:column("ABC")row("DEF")] and then set it as the print area.
View 2 Replies
View Related
Oct 7, 2007
i have found this code on the net but can only get the control sheet to work when i run macro "PrintSelectedSheets" i get a run time error 1004 application defined or object error i have put the code in the workbook object but having problems, it seems to be because the sheets that i am trying to print are hidden can this code be edited
Sub PrintSelectedSheets()
Dim i As Integer
i = 2
Do Until Sheets("Control Sheet"). Cells(i, 1).Value = ""
If Trim(Sheets("Control Sheet").Cells(i, 2).Value <> "") Then
Sheets(Sheets("Control Sheet").Cells(i, 1).Value).Select
'ActiveWindow.SelectedSheets.PrintOut Copies:=1
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
End If
i = i + 1
Loop
End Sub
This code seems to work ok
Sub CreateControlSheet()
Dim i As Integer
On Error Resume Next 'Delete this sheet if it already exists
Sheets("Control Sheet").Delete
On Error Goto 0...........................................................
View 2 Replies
View Related
May 14, 2008
I want to add a Punctation mark (comma), like this: ,
and also want to add punctation mark (colon), like this: :
In this moment I have below macro:
Public Sub CombineCells
Dim Combined As String
Combined = ""
For Each Cell In Selection
Combined = Combined & Cell.Value & ":"
Next Cell
Selection.Cells(1, 4).Value = Combined
End Sub
the effect shoud be like this:
before:
--A
1-C
2-D
3-E
4-F
Etc.
after transposed:
--D
1-C:D,E:F Etc.
View 3 Replies
View Related
Oct 25, 2005
I have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
View 9 Replies
View Related
Feb 24, 2014
I have a pretty large spreadsheet set up that invoices our clients. A few tabs in the front allow us to globally invoice if we did certain services for all clients and then we can also go into each tab and invoice each client for specific services performed on their property. Some invoices are two pages long and other may be up to seven pages long and anywhere in between... So that's the first issue, how do you find how many pages to print and then set the print range for each invoice.
The second issue centers around being able to print all the invoices at one time.
The spreadsheet is set up in this manner: A recap sheet we print to check off that each invoice was printed; an IIF statement to get the Excel info into QuickBooks; a template to set up each invoice's information with dates, dates services were performed,etc.; then there are five Global billing tabs where I can invoice all accounts globally or by their type of account (Saturday or Sunday open, 24/7 etc.); then we get into the tabs for each account. Each account has its own tab with an invoice loaded inside where we can itemize the services they received. Inside all these individual account tabs we have set up 'Zone' tabs where we can invoice all the clients we set up within a zone. There are about twenty of these tabs. Then at the end I have a few more tabs that aren't used any longer, there are about ten tabs there...
Is there a way I can hit Print and get all of my invoices to print out at one time versus having to go into each and every tab, set the print range, and then hit Print for all 250ish invoices?
This is the biggest complaint I have right now about the invoicing program I have set up...
View 4 Replies
View Related
Mar 7, 2014
How do I change the print settings of individual pages within a worksheet. Specifically, I'd like my worksheet to print out 4 pages, the first as portrait and the remaining as landscape.
View 2 Replies
View Related
Jun 5, 2008
I have set up a spreadsheet template that automatically populates specific values through the spreadsheet based on what the value of cell "A1" is. I want to run through 224 potential values in cell A1 and print out the worksheet after each potential value.
My thought on how to approach it is to write a macro that:
1. Selects the next item from the drop down box in cell A1
2. Prints the page (using default print settings)
3. Loops
But I don't know what the code would be. Cell A1 also does not need to be a drop down box, as long as it incrementally runs through all 224 listed values and prints after each one.
View 6 Replies
View Related
Apr 29, 2013
What I have is a large number of sheets in a workbook (26 to be exact). Each of these sheets has one specific named range. The file itself is quite large so I would like to print these ranges to a single PDF file. I did my best to search for this topic in the forums and while I did find some macros that were close, there was some sort of piece of code missing. Also, will how I list the named ranges determine the order of how they will show up in the PDF File?
View 3 Replies
View Related
Apr 16, 2009
This is probably a VBA thing, but there might be a simpler solution. Either would be grand!
Basically, I have a four sheet workbook that needs to be printed out in its entirety (no problem doing that ); however, I would like the final sheet (called "Room Data") to be printed, let's say ten times.
So basically I'd get a single print of the first three sheets and ten of the "Room Data".
Any ideas on how to do this without having to manually print the final sheet multiple times or creating ten identical sheets in the workbook?
View 3 Replies
View Related
Sep 18, 2013
I have a workbook that has a single sheet in it, in cell G2 I want to insert a page number where if I print of multiple copies on the first sheet it will say 1, the second 2, the third 3 and so on and so forth.
I have never written any codes for Excel.
View 4 Replies
View Related
Aug 5, 2009
I got a workbook with one active sheet. There are 6 colums and 55 rows. I want to creat a macro or formula to automatically print each individual row on a single sheet of paper. i will only need the line with a specific value printed i.e only print value more then 5
View 9 Replies
View Related
Mar 21, 2008
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies
View Related
May 14, 2013
Function Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
