# How To Identify Last Cell Of Single Column Range

Mar 30, 2013How can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".

View 9 RepliesHow can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".

View 9 RepliesADVERTISEMENT

I'm trying to separate a cell containing:

TSB w/6.5% NaCl - NS 29002TSB w/6.5% NaCl - NS 29003TSB w/6.5% NaCl - NS 29004

into a 2x3 table, in another sheet, like this:

TSB w/ 6.5% NaCl NS 29002

TSB w/ 6.5% NaCl NS 29003

TSB w/ 6.5% NaCl NS 29004

TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items

I want to add a Punctation mark (comma), like this: ,

and also want to add punctation mark (colon), like this: :

In this moment I have below macro:

Public Sub CombineCells

Dim Combined As String

Combined = ""

For Each Cell In Selection

Combined = Combined & Cell.Value & ":"

Next Cell

Selection.Cells(1, 4).Value = Combined

End Sub

the effect shoud be like this:

before:

--A

1-C

2-D

3-E

4-F

Etc.

after transposed:

--D

1-C:D,E:F Etc.

I'm looking for a way to identify the first cell of a page without using the pagebreak function: Sheet6.Range("B" & Sheet6.HPageBreaks(i).Location.Row). The reason being is for overall speed and performance as well as avoiding <out of range> errors on the last break. If I use totalPages = Sheet6.HPageBreaks.Count + 1

to determine the number of page breaks, is there a way to identify the first cell of page i in this way?

I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...

View 9 Replies View Relatedif a user has selected a range, how do you, in VBA, identify the:

1. Top left cell

2. Bottom left cell

3. Top right cell

4. Bottom right cell

For example if user has selected the range B5:M30, then we would want to identify in the macro:

1. Top left cell = B5

2. Bottom left cell = B30

3. Top right cell = M5

4. Bottom right cell = M30

I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?

View 3 Replies View RelatedIs there any easy way to identify the bottom left cell in a named range?

View 6 Replies View RelatedI have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.

I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.

What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.

In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].

I have a named range that is 5 columns wide by 100 rows. On another part of the spreadsheet I want to have a column point to just one of the columns of that range. How can I reference that column using a cell formula? I have a lot of these all over my spreadsheet, so i don't want to have to assign each individual column its own name.

View 2 Replies View Relatedwhat's the quickest way to convert an array (range) of data to a single column?

I have varying numbers of rows with varying cells of data in each row. I need to quickly compile (transcribe?) all the data into a single column.

Assume A1:A10 filled with the characters A to J.

I'm looking for a way to return the letter "C" when 3 serves as the index_num BUT I do not want to present all 10 characters in the formula.

I would like to use the range A1:A10 =Choose(3,A1:A10) or, if applicable, to name the range as DATA and then use: =Choose(3,DATA)

I tried all I know, including INDIRECT - but found no solution [is there any ?]

As I'm familiar with all workarounds - I will appreciate replies that use CHOOSE.

Currently i have a macro that prints range column A to O but i need to add column AD on the end of the O so in effect Ii would get A:O & AD. Current macro is below:

Sub PRINT_CALL_OFFS()

'

' PRINT_CALL_OFFS Macro

Sheets("DFS Result").Range("A:O").PrintOut

Sheets("CAR Result").Range("A:O").PrintOut

Sheets("ACU BOS(Z1)").Range("A:O").PrintOut

Sheets("ACU LON(Z2)").Range("A:O").PrintOut

Sheets("ACU MIDS(Z3)").Range("A:O").PrintOut

Sheets("ACU SW(Z4)").Range("A:O").PrintOut

Sheets("ACU WALES(Z5)").Range("A:O").PrintOut

Sheets("ACU SOTON EXP").Range("A:O").PrintOut

End Sub

I have tried adding & AD as follows:

Sheets("DFS Result").Range("A:O" & AD).PrintOut

However this doesn't work.

I need to delete a certain range of Rows in a single column

View 3 Replies View RelatedI have numbers in a range over an indeterminate number of rows and 6 columns. I want to create a single column of the numbers with no blank cells in between. It's to check Visa receipts from different depts.

View 2 Replies View RelatedI have a single column of numerical values that may repeat many times within

the column.

I require a flexible Formula:

Use an Input Cell for the specified and changeable Percentage(s) %.

Column may be filtered – so only take into account Visible Filtered Cells.

The Formula will calculate and Return the numerical range of values that fall

between the specified percentage % (using the Input Cell) e.g.; 70%.

The Formula should Return two numeric values: a Start Value and an End Value

– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the

values that appear 70% of the time in the column; therefore, taking into

account Repeat / Duplicate values.

The calculated Results: the two numeric values will be returned to separate

cells on a new Sheet.

I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:

Number of variable entered: 5

q9001

q9002

q9003

q9004

q9005

q9006

etc.

Should give me: "q9001 q9002 q9003 q9004 q9005"

I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.

(Using Excel 2010)

I am in need of a way to pull keywords listed in B2:B10 from text in A2:A10 and then those pulled keywords combined in cell C11.See attached document. So I have colors for keywords in column B and some random text in the column A including the keywords in parenthesis. Is there a way for a formula to find all keywords in A2:A10 and then list them in cell C11 with commas in between.So the result would be one cell C11 showing BLUE,GREEN,BLACK,ORANGE, etc.I have been trying to mess around with index and match and while I could get one to pull up I don't know how to combine it.

Keyword Range.xlsxâ€Ž

I am reading this fomular and cannot understand it.

=SUMPRODUCT($Q$13:$Q$309,($P$13:$P$309=$D20)*1,($O$13:$O$309=H$8)*1)

Basically each input should be a matrix and the first one really is. However the other two are not and look unfamiliar to me.

I want the numbers to give me a sum total if a cell that is not in the row contains an "x". Row of number from A1:A5 each cell has the number 1 in the cell. if there is a x in cell A2 i would like to get the sum of the numbers in A1:A5 in cell A3.

was trying =SUMIF(A2,"x",A1:E1) this is the formula in cell A3

I am expecting the result of 5, this formula returns the value of 1 since there is only 1 x in cell A2.

I have a workbook with a named range myrange, cells a2:a1001. I have counter as a named range, mycount cell z2. I want to get the value of myrange at cell address mycount and put that value elsewhere using vba.

View 2 Replies View RelatedHere is the set up:

I have a calendar sheet where the dates go down the rows, and there is one column per member of staff. The staff is split in to three streams (different apps to cover, etc).

In the calendar, we mark a "C" for when someone will be on-call, R for when they will be doing a release, and so on.

In a separate sheet in the workbook, rather than having people look at the whole calendar of 30+ people to see who is on what shift for a given stream, I have an On-Call Rota where the rows are again the dates, and the columns are the streams. In each cell of this sheet, there should be the names of all the people of that stream who will be on-call for that date, so a concatenation of the actual staff members from the calendar, separated by CHAR(10).

I have been unable to find a combination of INDEX, MATCH, LOOKUP, VLOOKUP, etc, etc that gets me past the main problem: they only ever match the first C (or the first R for the On-Release Rota). I can't get a formula for a single cell in the rota that will return all the names where there is a C in the calendar in such a way that I can concatenate them.

Here is the kind of thing I have had to do .....

I have a large amounts of named ranges each of about 100 rows 20 column's each in its own sheet and I need to be able to refer to a singe cell in that range.

I want to do this so that I can use an offset to get another cell value relative to the cell in the named range.

F9 contains a hyperlink to the named range and is the same as the named range but with spaces.

A couple of things that I have tried are below:

=OFFSET(INDIRECT(SUBSTITUTE($F9," ","_")),1,0)

=OFFSET(VLOOKUP("bob",INDIRECT(SUBSTITUTE($F9," ","_")),14,FALSE),1,0)

Neither of these work, I am asuming it is because I dont have a specific cell reference named for the offset?

I am trying to make this macro look at multiple cells in column X and perform the given operation based on what is found. I currently have it set to look at one cell, I am not sure how to make it look at a range of cells and change its cell refrences for the copy function.

Dim vS As Variant

vS = Sheets(3).Range("X5")

If Not IsNumeric(vS) Then

Exit Sub

Else

Select Case vS

Case 1

If MsgBox("Are you sure you want to delete?", _

vbYesNo, "ExcelTips") = vbYes Then

Application.DisplayAlerts = False

Sheets("Approved").Select

Range("B5:F5").Select

Selection.Copy

I'm having trouble assigning a range of a single cell using vba. I'm doing this to create charts. Here's the sub containing the problem

Private Sub AddNewSeries(Target As CTarget)

Dim i As Integer

Dim Match As Boolean

Dim rValid, rInvalid As Range

i = 2

Match = False

Do While Match = False

If Sheets("Graph Data").Cells(1, i) = ReportTargetBox.value Then

Match = True

MsgBox ("report name match")

Exit Do

Else: i = i + 1

End If

Loop.....................

This msg box :MsgBox ("Cell Value = " & Sheets("Graph Data").Cells(2, i).value) is working and returning the correct value.

I have a column of numbers that I need to reformat. I created a macro to copy/paste special/transpose to get the data into separate columns. I then used & to get them into one cell. I can only have five sets of # in each cell. The macro works but it replaces the previous set of accounts. Is this the best way to reformat these numbers? If so, how do I correct the macro so that it doesn't replace the data i already reformatted?

I have attached a sample spreadsheet.

I have a worksheet that I use to store several static lists which populate various combo boxes in my application. However, I'd also like to use this worksheet to store a single column of data which can shrink or grow dynamically.

I have no problem with finding the last cell and adding data to that cell, but I'm having trouble with how to go about deleting the value of a single cell.

So as an example, If I've populated Cells A1:A10, and I want to delete the value that's in A6, how do I go about moving cells A7:A10 up one to fill in any empty spaces?

I have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something

View 6 Replies View RelatedI'd like to reference Column A to a single cell in a different sheet.

=StoresServiced!A2

Returns the value of A2 in the sheet called StoresServiced to another sheet.

What I want to do is, the values from A2 to A102 to show in one cell, separated by commas. So if theres value in A2 (8009) and A3 (8010), I want the active cell (ex. M43) to look like this -> 8009,8010 -- so on and so fort

I am trying to do is put an asterisk at the beginning and the end of the Information in a cell for the entire column. Is there a way to make a macro that, once I highlight a column, it will put an asterisk at the beginning and end of the information in each cell in that column until a blank cell is reached where the macro will then stop? This will save me a lot of work. It will work for me if a particular column has to be defined in the macro, but would be better if it is one I can just highlight.

This would also work fine for me if I just had to highlight the cells that I want to use as well. Sorry if this seems to be a stupid question, but I am a very novice excel user

Copyrights 2005-15 www.BigResource.com, All rights reserved