I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 RepliesNew task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
Is there any method to speed up a for each loop to count text in a cell with multiple criterias in a single column. This is on example:
Code:
For each rr in r
If rr = "a" And rr.Font.Strikethrough = False Or rr = "B" _
And rr.Font.Strikethrough = False Then
a = a + 1
end if
next
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
View 8 Replies View RelatedI am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
I have a column of numbers that I need to reformat. I created a macro to copy/paste special/transpose to get the data into separate columns. I then used & to get them into one cell. I can only have five sets of # in each cell. The macro works but it replaces the previous set of accounts. Is this the best way to reformat these numbers? If so, how do I correct the macro so that it doesn't replace the data i already reformatted?
I have attached a sample spreadsheet.
I have a single column of about 1500 points, and I need them to be separated into many rows of 20 numbers.
I have multiple issues:
1) The middle number of each row (10th and 11th) need to be repeated. So a transpose formula can not work all the way through the 20 numbers. Unless I transpose the first ten, then tranpose the second ten. Is there an easier way around this ?
2) The bigger issue is, I would like to write a formula that can manipulate the date to enter in the correct cell.
To illustrate I will use a set of ten numbers:
1
2
3
4
5
6
7
8
9
10
11
12
INTO
1
2
3
4
5
6
7
8
9
10
11
12
I frequently have to work with tables set up like this:
A1 A2 A3
B1 B2 B3
C1 C2 C3
All I would like to do is to transpose them into one single column:
A1
A2
A3
B1
B2
B3
C1
C2
C3
My starting point is a big data set that needed to be validated by several users. I split the data set into smaller sets that were sent out. All users have filled in the same column called "Input"
What I would like to be able to do is to paste their input into a single column on my original data set and keep the name of the input next to it. Is it possible to paste without overlapping prexisting data ? Something of the likes of F5 ("Select blank cells/text") ?
I've attached a simple file with dummy data to explain myself.
How can I sort a single column of data to multiple columns of data. e.g. I want to convert ~1800 rows of data from 1 column to 3 or 4 columns.
View 14 Replies View RelatedI want to transpose multiple rows to single column and I'm dealing with huge data.
For example, I am working with data like this
A1 A2 A3
B1 B2 B3
C1 C2 C3
and I have to transpose to
A1
A2
A3
B1
B2
B3
C1
C2
C3
I'm using following vb code:
Sub ToOneColumn()
Dim i As Long, k As Long, j As Integer
Application.ScreenUpdating = False
Columns(1).Insert
[Code] ........
The script terminate without completing the job and shows error as "runtime error '1004': application -defined or object defined error".
I am trying to take data from multiple rows and columns (matrix) and reformat it all to fit in a single column.
It would be great if I could select the cells I want to reformat into the single column as the number of rows and columns containing the original data is not always the same (ie 20x20, 21x35, 56x200) etc...
How can you move data from multiple columns into a single column? I have attached a short example of the data I receive. (In reality, the data could be hundreds of columns and/or hundreds of rows, but this is representative of what I might receive). It does not need to be sorted and including the header row in its own column is optional. I do not know VBA all that well but can muddle through it if someone can give me an example of what the code should look like.
View 5 Replies View Relatedin moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
View 6 Replies View RelatedI have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
transposing and sorting data into multiple columns.
Column 1 for example will have the Parent's Name. Column 2 will have the Children.
If Mark has 3 children, X Y and Z
Jim has two children, A and B
then I want Column 1 to display Mark and Jims Name and column two should display all the children
Here is how I want the data:
Column1 Column 2
Mark X
Mark Y
Mark Z
Jim A
Jim B
Please see attachment.
I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
code to find/replace the letters: "A" with "Active", "P" with "Contract", and "C" with "Settled sale", all in column "Q".
View 2 Replies View RelatedI'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
I have a single column with multiple rows of data like this: Afirst last, Bfirst last, Cfirst last (all in one cell) etc.
I want to type some names in one cell in the same format (Afirst last, Cfirst last, Bfirst last) but not order and then check if any of those names exist in the first column and count the results of matches.
So in this example I am looking to count Bfirst last and/or Cfirst last in every cell of column A. I need to use a formula.
I have a long list of data with many columns and I'd like all the information to be in one column without manually copying and pasting each column and adding to the first column. The data has different amounts of rows and columns as well. An Example is below. I'm using Excel 2010. Is there a formula or something for this? This isn't the data I'm using but just an example since I do this frequently.
Data Looks like:
54654
31233
42343
51234
66968
43252
54657
63253
[code]....
Would like to look like:
54654
66968
79282
91596
68185
31233
[code]....
I have the following data on a spreadsheet created by a formula:
A1: 1.1234
A2. 2.234
A3: 3.34
I have the data formatted to only have two decimal places so it looks like this:
A1: 1.12
A2: 2.23
A3: 3.34
I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:
=A1 & "," & A2 & "," & A3
However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34
Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34
Win7/2010
I have an array PeopleList(6,320) that contains
PersonID, FirstName, LastName, Email, Phone, Notes
What I'm trying to do. I have two separate requirements:
(1) To add the whole array to a listbox on form initialization - see Sub UserForm_Initialize()
(2) To clear the listbox and re-add only certain items based on what's typed in a textbox - see Sub txtSearchTerm_Change()
I have two errors:
Error 1 in UserForm_Initialize()
The listbox contents need transposing! It is displaying as
Code:
1 2 3 4 5
Tom Ben Heidi Julie Mark
Smith Jones Evans Simpson Petersen
x@yo.com a@bo.com c@do.com e@fo.com g@ho.com
02071001022 02071001026 02071001027 02071001028 02071001029
Friend
When it should be displaying as
:
Code:
1 Tom Smith x@yo.com 02071001022 Friend
2 Ben Jones a@bo.com 02071001026
Is there a way to transpose the array?
Error 2 in txtSearchTerm_Change()
I cannot find anywhere - even on MSDN - all the information I need how to correctly add a single record to a multiple-column listbox! What I'm trying is:
Code:
For i = 0 To UBound(SearchList) If InStr(1, SearchList(i), SearchTerm) 0 Then
With lstPeople
.AddItem
For j = 0 To UBound(PeopleList, 1)
.List(c, j).Value = PeopleList(j, i)
[Code] ......
How do I add a record to the listbox????
Full code for reference:
Option Explicit
Private PeopleList As Variant
Private SearchList As Variant
Private Sub UserForm_Initialize()
[Code] .......
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
I have a single list of data that I am trying to convert into multiple lists. Here is a sample of what I have:
COL-A COL-B
1 Animals
2 Dogs
3 Bulldogs
4 Missy
4 Rex
4 Fred
3 Terriers...............
Hard to describe, but the 1 should have the 2's under it. Each 2 should have the 3's. Each 3 should have the 4's, etc... I am not sure how to put tables into this so I will try to draw a few.
COL-A
Animals
Dogs
Cats
COL-B
Dogs
Bulldogs
Terriers
Dalmations..................
The order of the columns do not matter. If anyone has any ideas how I could do this that would be great. The data is on seperate sheets. I would love to be able to do it with INDEX and MATCH
criteria, but a VBA solution would be acceptable.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I'm trying to search for a column by looking for a specific column header and then format the entire column in the specific number format desired, but I keep getting an error message with this line.
Code:
With Rows("1:1")
.Find(what:="Go Live Date").Column.NumberFormat = "m/d/yyyy"
End With