I have a named range that is 5 columns wide by 100 rows. On another part of the spreadsheet I want to have a column point to just one of the columns of that range. How can I reference that column using a cell formula? I have a lot of these all over my spreadsheet, so i don't want to have to assign each individual column its own name.
View 2 RepliesI have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies View Relatedwhat's the quickest way to convert an array (range) of data to a single column?
I have varying numbers of rows with varying cells of data in each row. I need to quickly compile (transcribe?) all the data into a single column.
Assume A1:A10 filled with the characters A to J.
I'm looking for a way to return the letter "C" when 3 serves as the index_num BUT I do not want to present all 10 characters in the formula.
I would like to use the range A1:A10 =Choose(3,A1:A10) or, if applicable, to name the range as DATA and then use: =Choose(3,DATA)
I tried all I know, including INDIRECT - but found no solution [is there any ?]
As I'm familiar with all workarounds - I will appreciate replies that use CHOOSE.
How can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".
View 9 Replies View RelatedCurrently i have a macro that prints range column A to O but i need to add column AD on the end of the O so in effect Ii would get A:O & AD. Current macro is below:
Sub PRINT_CALL_OFFS()
'
' PRINT_CALL_OFFS Macro
Sheets("DFS Result").Range("A:O").PrintOut
Sheets("CAR Result").Range("A:O").PrintOut
Sheets("ACU BOS(Z1)").Range("A:O").PrintOut
Sheets("ACU LON(Z2)").Range("A:O").PrintOut
Sheets("ACU MIDS(Z3)").Range("A:O").PrintOut
Sheets("ACU SW(Z4)").Range("A:O").PrintOut
Sheets("ACU WALES(Z5)").Range("A:O").PrintOut
Sheets("ACU SOTON EXP").Range("A:O").PrintOut
End Sub
I have tried adding & AD as follows:
Sheets("DFS Result").Range("A:O" & AD).PrintOut
However this doesn't work.
I need to delete a certain range of Rows in a single column
View 3 Replies View RelatedI have numbers in a range over an indeterminate number of rows and 6 columns. I want to create a single column of the numbers with no blank cells in between. It's to check Visa receipts from different depts.
View 2 Replies View RelatedI'm trying to separate a cell containing:
TSB w/6.5% NaCl - NS 29002TSB w/6.5% NaCl - NS 29003TSB w/6.5% NaCl - NS 29004
into a 2x3 table, in another sheet, like this:
TSB w/ 6.5% NaCl NS 29002
TSB w/ 6.5% NaCl NS 29003
TSB w/ 6.5% NaCl NS 29004
TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items
I want to add a Punctation mark (comma), like this: ,
and also want to add punctation mark (colon), like this: :
In this moment I have below macro:
Public Sub CombineCells
Dim Combined As String
Combined = ""
For Each Cell In Selection
Combined = Combined & Cell.Value & ":"
Next Cell
Selection.Cells(1, 4).Value = Combined
End Sub
the effect shoud be like this:
before:
--A
1-C
2-D
3-E
4-F
Etc.
after transposed:
--D
1-C:D,E:F Etc.
I have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedI'm looking for a macro to remove all words (in a single word per cell format) in a range (approx 100 columns & 7000 rows), except for a list of 100 words.
I'd prefer to email the file if that's okay.
I have sheet where I need to restrict access to a select group of individuals. I have a formula in a select case statement that runs from the workbook_open event and have hard coded the names of the individuals who can access the file. If they are not on the list, they are prompted for a password. This works OK, but I have sheet that is hidden and want to maintain the list of users there and update the code to loop through the values in a named range. I have a snippet of the current code below.
Code:
Select Case function_name
Case Is = "user1"
Run "enable_access_code"
Case Is = "user2"
Run "enable_access_code"
Case Is = "user3"
Run "enable_access_code"
Case Else
' User not authorized or opened while not on company network
' Prompt for project password
form_Password.Show
End Select
I have the below code that will do a data dump of an access table into excel based on an SQL query, is there a way to do a select statement that can match against the data in column C on the spreadsheet.
like:
"Select * From Bsmart where Serial_Number = ##[EXCEL COLUMN C1:Lastrow]##
Code:
Dim bkNew As Workbook
Dim cnt As ADODB.Connection
Dim rst As ADODB.Recordset
Dim stCon As String
Dim SQl1, SQL2, SQL3, SQL4, SQL5, varSQl As String
stCon = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
[Code] .....
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?
I have two workbooks wkA and wkB. I have a named range in wkB called BName.. can someone tell me whether it is possible to set a range variable (say, raA) from wkA to this named range in wkB. I have tried something to the effect of set raA = wkB.range("BName") but this doesn't work.. I've also tried set raA = [wkB.name].range("BName") to no avail. I'm wondering whether named ranges can actually be read from other workbooks.
View 4 Replies View RelatedI'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedI have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
View 8 Replies View RelatedHow to convert "Excel table" to a range without loosing data connection to access?
View 2 Replies View RelatedI have a file that I need to do a text to column separated by comma and then transpose results to a single column. See exaple below
File
AreaZone
0886518
1801315
1801413
1801524, 25
1804214, 16, 18
Results:
AreaZone
0886518
1801315
1801413
1801524
1801525
1804214
1804216
1804218
I need to run a vlookup to find some data. But I have a lot of data about 600,000 lines. Currently this list is spread over several columns (as the limit is something like 50000). How can I make my reference range access multiple columns?
View 5 Replies View RelatedI have an Excel file ( named "Classes.xsl"), that has a worksheet (named "RawData") that is layed out something like:
Name Dept Class
John 0547 Class 1
Jane 0368 Class 1
Jim 0368 Class 2
Sue 1235 Class 2
I am trying to get an Access-Like report without utilizing Access. Is there a way to generate a report similar to below using Excel as the data source (could be mail merge, perhaps a macro with a printout) I am not sure which way to try and was hoping someone could point me in the right direction...and possibly provide an example.
Class EnrollmentClass 1John 0547
Jane 0368Class 2Jim 0368
Sue 1235
I am looking for a formula to return the lowest value (MIN) in a range only IF it is the single lowest number. It's to determine a "skins" winner in golf, so I am looking for the best score on a hole that is not a tie, all other values can be zero.
View 5 Replies View RelatedI try to multiply a range with a single value then put the result to another range. But I got the error. range("a1:a10").value = range("c1:c10").value * 5. the error message is the type dismatch. How to do that simple task?
View 5 Replies View Related