Add Totals By Week
Oct 9, 2008
Does Excel know week numbers? e.g. Week 40 is Sunday 10/5/2008 to Saturday 10/11/2008. Here's what I have...
Column A Column G
date $ Amount
my data example...
10/5/2008 $10.00
10/5/2008 $20.00
10/8/2008 $12.00
10/11/2008 $8.00
10/12/2008 $25.00
10/13/2008 $75.00
What I want the formula to do is look in Column A find all of the dates that are in week # whatever and then look in column G and add all of those $ amounts. So the result would be...
Week 40 $50.00
Week 41 $100.00
View 3 Replies
ADVERTISEMENT
Oct 2, 2009
I have to keep a record of the running totals of school house points for each week. The problem is that teachers are very lazy and don't record data every week so I have many blank cells which my current formula can't cope with. I've tried using N/A but it doesn’t seem to work? (Have thought about threats of violence but would probably lose my job) I’m if there is no data (blank or 0) then I need it to keep the same total in the cell as the previous week and so on until new data is entered and updates the total. I have attached a simplified copy: Teachers enter points in the HP sheet, the Running Totals sheet (TAB) contains the formula.
View 4 Replies
View Related
Jun 12, 2014
I have two columns with total hours worked at different places and a grand total for both together in a third column.
I'm trying to sum the total hours for the week so far from Thursday till the following Wednesday for each week.
I want the wookbook to look up todays date and tell me what the total hours are for the current week
I'm using Excel 2003 - see the file attached
View 14 Replies
View Related
Jan 19, 2010
I am new to VBA & not sure of the full understanding of code copied from a workbook which worked on the same principle but with Monthly (12) tabs. I thought if modified to show weeks, the macro would be able to locate the current week tab & day/date within - but upon opening, the cell stops at WK19 & column O - rather than WK43, Column N (which changes daily).
Sub Auto_Open()
week(1) = "WK1"
week(2) = "WK2"
week(3) = "WK3"
week(4) = "WK4"
week(5) = "WK5"
week(6) = "WK6"
week(7) = "WK7"
week(8) = "WK8"
week(9) = "WK9"
week(10) = "WK10"
week(11) = "WK11"
week(12) = "WK12"
week(13) = "WK13"
week(14) = "WK14"
week(15) = "WK15"
week(16) = "WK16"
week(17) = "WK17"
week(18) = "WK18"
week(19) = "WK19"
week(20) = "WK20"
week(21) = "WK21"
week(22) = "WK22"
week(23) = "WK23"
week(24) = "WK24"......................................
View 9 Replies
View Related
Dec 11, 2013
I was wondering if there's a way to add a formula to calculate week over week % change automatically every week when I enter in new data. see the attached excel file for reference.
What I would like to have is the ability for the formulas in c5 and f5 to be able to auto-update to the newest week and the previous week's data instead of manually having to update it each week. So if I were to add a new row with data for week beginning 12/2, the formula in c5 and f5 would automatically update to calculate the week over week variance. I tried researching prior to asking the question on this forum, and I think it may be possible to do it using the index match function, but I'm not sure how to apply it in this case.
View 3 Replies
View Related
Aug 6, 2008
I have a comparison model that looks at two weeks of data. I am trying to get around the deletion and insertion of records week on week. With the code below, I can currently find and correct the deletions and insertions to the list, and then resort the list so that the comparison will work.
Sub CheckForNewProjsRemovedProjects()
Dim MyCell As Range, oCell As Range, NewCell As Range
Dim Rng1 As Range
Set Rng1 = Range("A1:A" & Range("A" & Rows.Count).End(xlUp).Row)
' Columns("B:B").Select
Range("B1:B" & Range("B" & Rows.Count).End(xlUp).Row).AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Range( _
"C1"), Unique:=True
For Each oCell In Rng1
For Each MyCell In Range("C1:C" & Range("C" & Rows.Count).End(xlUp).Row)
If MyCell.Value = oCell.Value Then................
View 9 Replies
View Related
Mar 6, 2010
I have a running time sheet daily. It has 2 columns for Labor and 2 columns for travel
i.e. travel From / To 1300-1400 calculate 1 hour then travel home 1600-1700 1 hour this is calculated by the date entry 01/02/10 I have another calculation that tracks by the date i.e. 01/02/10 then Next job which all works fine.
The problem becomes how do I calculate a weekly total labor and travel by the date So added another column called weekly hour’s labor and use the Weeknum to determine which week is which day/date so the first Monday in January 2010 is week 2
2 problems
Having many multiple day / date entries are the same date x 7 days Monday –Sunday
(Relies on the date entered and the weeknum) 01/03/10 each line is complete however the dates carry over as does the time
When trying to calculate each row x 3 same date time then the value will be incorrect I need to calculate
Say 9.5 hour labor from the date 01/03/10 not 28.5 hours and then calculate the total weekly hours
01/03/10, 9.5 hours labor, 3 hours travel
01/03/10, 9.5 hours labor, 3 hours travel
01/03/10, 9.5 hours labor, 3 hours travel
i do have work and travel times for each job on the same line (separate columns) but I display the total here by date to summarize the totals
i have tried sum products and sumif to avail. I am using Windows XP SP2 with MS Office 2007
how do i calculate weekly hours by date and weeknum ?
Total Work per day
Total Travel per day
Daily....................
View 9 Replies
View Related
Jun 16, 2014
I'm trying to write a formula that will tell me when its week one or week two, week three and week 4 based on a given date of any month.
I'm using weekday formula but no luck.
View 6 Replies
View Related
Feb 5, 2009
I have to download a report every week and have been manually checking the report weekly for changes.
View 5 Replies
View Related
Nov 24, 2009
I have a column where I am convering the Date into a Fiscal week number.
For example 10/6/2009 is Work week 41
Now I want to show October Week 41
I need to add the month and the text "Week" before the week number. what is the formula I use.
View 3 Replies
View Related
Oct 14, 2009
I need to copy the values of a range on the weekly sales worksheet to the monthly sales worksheet. The last column is the total on the weekly sales. Part of the heading of the total column is the week ending date (e.g. 10/17/2009. On the Monthly Sales I have the months in columns by week ending (e.g. 10/17/2009).
Range I4:I28 to the monthly sales worksheet by date.
View 10 Replies
View Related
Apr 6, 2007
Is it possible to format cells to convert a date format of month/day/year to = year/week #/day of week? For example, 04/05/07 (April 5, 2007) would read as 7145, (7=last digit of year/ 14 = week number / 5 = day of week....Sunday being the first day of week)
View 9 Replies
View Related
Oct 9, 2008
Here's what I have...
Column A Column G
date $ Amount
my data example...
10/5/2008 $10.00
10/5/2008 $20.00
10/8/2008 $12.00
10/8/2008 $8.00
10/8/2008 $25.00
10/9/2008 $75.00
What I want the formula to do is look in Column A find all of the dates that are on the same day and then look in column G and add all of those $ amounts.
So the result would be...
10/5/2008 $30.00
10/8/2008 $45.00
10/9/2008 $75.00
View 4 Replies
View Related
Jun 5, 2014
Here is what I have:
cell b6 =SUM(B3:B4)
cell b8 =C8*B6
cell b20 =SUM(B11:B18)
cell b29 =SUM(B22:B27)
I want to add all these cells together for the total. I used the formula =SUM(B6+B8+B20) and it works fine. However, when I try =SUM(B6+B8+B20+B29) I end up with 0.00 in cell B31
View 2 Replies
View Related
Nov 22, 2012
I'm tracking 50 food items (in column A) for 40 homes (columns B-AO) where each home gets none or varying quantities for each food item (ex: apples 7 for home B, 0 for homes C-L, 19 for home M, etc.). I can get grand totals for each item for all homes, but need to also list how many for each home receiving apples. Ex: 4 homes get apples (4, 7, 19, 1 respectively). SO I want my total sheet to have a column for each food item with the grand total "31" and the second column to show 4 + 7 + 19 + 1. The quantities change frequently so I need a formula I can use for each food item. Also I don't want "zeroes" included. What formula would I use to do this?
View 3 Replies
View Related
Jan 2, 2014
I've been trying different combinations of "If" statements to get a sum for the total items in house or total items at outside vend.
I need something that will be able to differentiate from parts in house to parts outside vend and put the total sums into M2 and M4
Please see the attached sample : Sample Qty.xlsx‎
View 2 Replies
View Related
Jul 9, 2009
I need help to total a column but in four cells the values are as a result of conditional formatting and the total ignores those cells. Is this difficult or am I a bit slow? This is in 2003.
View 6 Replies
View Related
Oct 20, 2009
This problem has come at the end of a big exercise whereby I've managed to construct a spreadsheet that automates three payment processes based on various VLookups to another file. However, I've come to a stage where I need to pre-empt a payment allocation based on cumulative totals.
I'll try and explain clearly below but I've also attached a spreadsheet showing the intended result (along with a copy without the output so that someone can add in the formula - again, if it exists.
So, this all centres around a code allocated to our clients and a declaration that they complete. Say client code "Apple1" (col E) sends in instructions to pay on a position of "650,000" (col F). Within our existing spreadsheet we have an available position of "800,000" which can be seen by totalling column G for client code "Apple 1".
So that's the first requirement - for all rows on my existing spreadsheet for client code "Apple1", I want to add the cumulative total of column G ("800,000") I'd like this captured in column H, as per my example.
We can then make payment based on their declaration, up to their total available amount. However, we need to pay them in stages according to our existing allocations (col G). Therefore, taking the first example, their declaration show's an available position of 650,000, their total position is 800,000 and the available nominal amount for that row (col G) is 200,000 - so they can be paid on that full amount therefore, 200,000 should be shown in cell I3.
So now, they've got 450,000 left to be paid and cell G4 again shows a position of 200,000, so once again, cell I4 should show 200,000.
The client "Apple1" now has a payment amount remaining of 250,000 remaining but in this instance, cell G5 is for 300,000 - so because the remainder of their available payment is less than the amount in cell G5, we should post the available payment amount in that field - 250000.
Therefore, if you add up all of column I for client "Apple1" it comes to 650,000 - the amount we have on our declaration - even though the total of their available position is 800,000.
I've included another client in the mix "Sauce2" who should show 200,000 and 0 respectively in cells I6 and I7.
View 14 Replies
View Related
Apr 20, 2009
Let me first explain what my worksheet looks like.
View 2 Replies
View Related
Jan 11, 2008
I have a column of wickets (M). M5 and M6 are the number of wickets for one match, M7 and M8 for the next, and so on. Two wicket entries for each match.
I needed a formula to count the amount of times the combined wicket total for a match is greater than 10. Initially there were only a few M values, so I used this:
IF(M5+M6>=10,1,0)+IF(M7+M8>=10,1,0)+... and so on. Now I want to expand it to have more M values and this formula would become huge.
View 11 Replies
View Related
Nov 29, 2011
I have a file tens of thousands of lines long. This has a bunch of store numbers along with the amount owing to them.
Now this is presented like this
Str 50 $10
Str 50 $20
Str 50 $15
Str 60 ... etc etc
I just need the totals for each store, which I will then copy into my billing file. The person who sent me this original has already subtotaled it, and each site has a plus sign next to it. When I click the plus sign I can see the breakdown (ie store 50 ten times, store 60 twelve times etc) but otherwise the store totals are given on 'adjacent' rows. The problem is these rows arent actually adjacent, the other rows are just hidden. So when I try to copy the store totals all the other junk gets copied as well.
How do I copy just the store number and totals?
View 6 Replies
View Related
Oct 31, 2006
I would like to get the total in column B but its not giving me the correct total. So I would half to use a helper column in column D to retrieve correct results. Is there anyway I could have an all in one formula for this. I would prefer not to use the helper column. The correct result is in cell D23.
View 9 Replies
View Related
May 4, 2007
I would like to know how do I go about adding the following:
This is a test it counts out of 1250 points
But there are 3 fields which can be omitted from the grand total of 1250
Some students might not have all three fields. The fields totals are 30, 90 and 130. The students might have one or two of them in either order. Now what I would like to do is have 3 different fields where I can mark with a Y=Yes and N=No in a block. then it would change the Grand Total score accordingly.
View 9 Replies
View Related
Dec 12, 2007
I have a spread sheet that is used to review calls placed by a call center.
Column A has the extensions of the phones, and Column E has the type of call (Outgoing or Incoming). Each line is a new phone call.
We have about 8 extensions, but the worksheet could have a couple thousand calls. So, Column A could have extension 1401 from rows 1-100 as extension 1401 made 100 calls. I'm looking for a formula or macro that will summarize how many outgoing and incoming calls extension 1401 had. Thoughts?
My initial thought was something like this:
=SUMPRODUCT(--(A2:A5000=H2),(E2:E5000))
In this formula, I would type in the extension of H2 and it would scan Column A and add up the values in Column E. The only problem is, that Column H doesn't contain a numerical value. It only has "Incoming" and "Outgoing" (minus the quotes), so this doesn't work.
View 9 Replies
View Related
Apr 30, 2008
Im trying add up totals on a list
a1b2c3a4b5c6a7b8c9a10b11c12a13b14c15
So for instance i want it to look at column A and find all the a's then then add the value of column b
so the total here would come out as 35
View 9 Replies
View Related
Nov 1, 2008
I am attempting to build a spreadsheet for work, and I'm having trouble calculating a correct total.
In essence, the bit of my spreadsheet I'm concentrating on is 2 columns:
Column A is headed "Type of Work" and Column B is headed "Completed".
The Type of Work will either be Letters or Memos, and the Completed will either be Yes or left blank to indicate No. For other reasons, No has to be represented by a blank cell.
At the moment, I have 12 rows, going from A2 to B13, with data such as the following:
Letters Yes
Letters Yes
Letters
Letters
Letters Yes
Letters
Letters Yes
Memos
Memos Yes
Memos
Memos
Memos Yes
I need a summary section at the side with the following calculations:
Total Number of Entries
Total Number Outstanding
Total Number of Letters Outstanding
Total Number of Memos Outstanding
However, as I have only populated it with 12 rows of data for my testing purposes, I need to build formulas to take into account the fact that a maximum of 2000 rows may be filled in by other people over the next few months. Therefore, my formulas look like the following:
Total Number of Entries (stored in E2):
=COUNTA(B3:B2000)
Total Number Outstanding (stored in F2):
=E2-(COUNTIF(C3:C2000,"Yes"))
Both of the above formulas work perfectly, and when I enter a 13th and 14th row, the totals update as I want them to, so I have no problems there.
However, I am struggling to enter a correct formula which will calculate the total number of Letters that aren't Completed.
I did set some names and tried to use:
{=SUM((Type="Letters")*(Completed="Yes"))}
but it gave me a #NA error, presumably because the named range was looking at all the empty cells up to A2000.
View 9 Replies
View Related
Jan 21, 2009
I need and can't wrap my head around it enough to figure it out myself.
On one worksheet, I have raw sales data:
A B C D E F
Cust # Cust Name Product # Prod Name Sales Date
10001 whoever 800001 whatever 200 1/3/2009
10003 whoever2 800241 whatever 250 1/3/2009
10001 whoever 800060 whatever1 210 1/3/2009
10001 whoever 800055 whatever2 222 1/3/2009
Each product has multiple product numbers, so one product could have multiple product numbers: 800001, 800055, 800241, 800002, etc..
I want to count total sales by product, regardless of customer for a certain date.
I have the product numbers in their own cells.
I would like to say "If the product number is any of these, and the date is this, add all the sales numbers together and give me a total"
View 9 Replies
View Related
Jun 10, 2014
I am currently trying to find a better way to track quantities of delivered material from multiple suppliers. I have a attached a sample of what I am trying to do. In the "totals" sheet Row 3 is working as planned. There are a couple of issues that I am having with my formatting as is. First off in my "raw" data sheet there is an empty row between each row of numbers (this is they way I am sent the information from the supplier). This empty row causes my totals to place a Q everywhere column A on "Raw" is not filled with "B". Is there a way to have the totals sheet only pull from the cells with values in them?
My other question is how I would be able to get the values for material, Net wt., and Charges to populate if Column A in "Raw" is Q?
Quantity Tracking.xlsx
View 5 Replies
View Related
Aug 7, 2014
I have a list of stores and the costs for various items.
Each store has (usually) more than one row.
Each store's items are totaled at the end of each line. Simple
What I do not know how to do is total all rows for each store, automatically. Like I said, I don't know how to explain it, so searching for it does not work out well for me.
Please see the attached sheet : How to Calculate Store Total.xlsx
View 9 Replies
View Related
Feb 9, 2014
I would like to take all of the data from student summary sheet for each category and total it for all males and females separately on the second sheet. I am looking for a formula that i can put in each cell and calculate all of the totals, and then just drag down....
View 8 Replies
View Related
