Running Totals In The Cell As The Previous Week And So On Until New Data Is Entered And Updates The Total
Oct 2, 2009
I have to keep a record of the running totals of school house points for each week. The problem is that teachers are very lazy and don't record data every week so I have many blank cells which my current formula can't cope with. I've tried using N/A but it doesn’t seem to work? (Have thought about threats of violence but would probably lose my job) I’m if there is no data (blank or 0) then I need it to keep the same total in the cell as the previous week and so on until new data is entered and updates the total. I have attached a simplified copy: Teachers enter points in the HP sheet, the Running Totals sheet (TAB) contains the formula.
View 4 Replies
ADVERTISEMENT
Apr 10, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
View 14 Replies
View Related
Jun 12, 2014
I have two columns with total hours worked at different places and a grand total for both together in a third column.
I'm trying to sum the total hours for the week so far from Thursday till the following Wednesday for each week.
I want the wookbook to look up todays date and tell me what the total hours are for the current week
I'm using Excel 2003 - see the file attached
View 14 Replies
View Related
Mar 27, 2014
formula to take a value from one sheet and add to it in Excel 2010? I'm naming the sheets but not necessarily numerically. I have done it by manually entering the sheet name but would like it to figure out the sheet name automatically based on where the sheet is located in the workbook. That way I can copy the current sheet, rename it and still have it update properly with a running total. Here is what I have now: =D7+'011514'!E7
View 2 Replies
View Related
May 14, 2009
This is just a sample worksheet. I have got a worksheet with having 3 coloumns A, B & C. Column A contains E Code, while Column B is of time which user will enter. Column C contains the time in Hours.
I have entered one record for example. Now, whenever user enters the value in B3, then formula from C2 should be copied to C3 i.e it should be =B3/60.
I want this to be done using VBA. Pls help me out. I want to use this feature in one of my another files which requries this feature.
View 6 Replies
View Related
Aug 3, 2008
I am trying to do a running total in one column with data added from the columnn before it. But I dont want the last amount in the running total to continue down the page I would like it to be either blank or zero amounts. Also if there is a zero amount in the first column the running total should show the amount previous.
View 3 Replies
View Related
Feb 4, 2013
Here is what I have and am trying to do:
I entered the date and day in this format in multiple sheets in workbook 1 (named 0101, 0102, 0103) from the start of the year to last night (B2:C4):
Date:January 01, 2013
Day:Tuesday
I then entered all the data needed below that (B5:E26):
TimeTransactionsTotal SalesAverage Sales
12:0039 $352.97 $9.05
13:0053 $416.98 $7.87
14:0044 $339.42 $7.71
15:0043 $304.96 $7.09
etc.....
In workbook 2, I have sheets named for each day of the week. I would like to take the information from the previous three weeks for each corresponding day from workbook 1 and put the averaged data into another table with the data all formatted the same in workbook 2. This way, each week when I go into the aggregate file (workbook 2), I can look at the chart I'll create and see the average of the past three weeks transactions, total sales, and average sales for each hour of the business day and be able to staff accordingly (assuming the trend continues).
View 1 Replies
View Related
Feb 2, 2009
I have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
Else
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub
As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this
If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then
I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?
View 9 Replies
View Related
Jul 4, 2013
I have a formula in one of my sheets that updates each time a new value is entered...
=INDEX('HR Reports Marco New'!BI:BI,COUNTA('HR Reports Marco New'!BI:BI),1)
The issue I'm having is that Column "BI" has an =SUM formula already in it and the formula above is going to the last value which is 0 but all the way to the end of the year when we are only in July...
View 4 Replies
View Related
Oct 9, 2008
Does Excel know week numbers? e.g. Week 40 is Sunday 10/5/2008 to Saturday 10/11/2008. Here's what I have...
Column A Column G
date $ Amount
my data example...
10/5/2008 $10.00
10/5/2008 $20.00
10/8/2008 $12.00
10/11/2008 $8.00
10/12/2008 $25.00
10/13/2008 $75.00
What I want the formula to do is look in Column A find all of the dates that are in week # whatever and then look in column G and add all of those $ amounts. So the result would be...
Week 40 $50.00
Week 41 $100.00
View 3 Replies
View Related
Oct 18, 2006
Basically, I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
View 9 Replies
View Related
Sep 13, 2006
I would like to sum the values entered into A1 each time i enter a new value into A1 and to place the grand total, of all values entered, into A3 ? This is as long as the sheet1 is activated ?
i tried with Event (Change/Selection change), but could not get a result......................
View 3 Replies
View Related
Oct 18, 2006
I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
View 9 Replies
View Related
Mar 28, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number) Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
View 5 Replies
View Related
Aug 22, 2006
Is it possible to have numbers added to the same cell and have excel continue to calculate the addition for me in that same cell......ex: I have the number 8 in cell d2 and I want to add the number 8 to that cell and have excel add the 8 to the previous 8 for a total of 16 in the same cell.....the next time I would add 5, and the total would be 21? Can this be done in a single cell?
View 10 Replies
View Related
Jun 13, 2014
I am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
View 7 Replies
View Related
Oct 14, 2009
I need to copy the values of a range on the weekly sales worksheet to the monthly sales worksheet. The last column is the total on the weekly sales. Part of the heading of the total column is the week ending date (e.g. 10/17/2009. On the Monthly Sales I have the months in columns by week ending (e.g. 10/17/2009).
Range I4:I28 to the monthly sales worksheet by date.
View 10 Replies
View Related
Jun 24, 2014
I have an issue whereby I have thousands of lines of data. I need to bring back the "previous month" worth of data (along with some additional information) but not sure how to go about this.
The attached shows the example file. I need the following :
1. Take the data to populate the "Populate" tab
2. Using Column F (Invoice Date Created) to only bring back the "previous month data" - in this case it would be May 2014
3. The following formula is what I have currently for Column B of the "Populate" tab: =SUMPRODUCT(SUMIFS('Data'!$N:$N, 'Data'!$M:$M, "Invoice Payment Processed", 'Data'!$A:$A, A2))
4. The above formula brings back all the values - I only want the previous month.
5. I am then not sure how to calculate Column C - which is a count of the amount of invoices that make up the total
View 3 Replies
View Related
Apr 6, 2009
Can we print out runing totals, i.e. for data on single worksheet at the time of printout I would like to print carried forward total at the end of the page and brought forward total at the starting of the next page
View 4 Replies
View Related
Sep 27, 2009
I've been racking my head on this one.
I need a function where for a given date will return the date of a specified weekday in the previous week.
Example: If today is Friday Sept. 25th 2009 and I want to find the date of
the Wednesday in the previous week I would need something
like DATEPREVIOUSWEEK("09/25/2009", vbWednesday)
View 9 Replies
View Related
Jul 7, 2013
I have a data tabel in Sheet 1 & Sheet 2
In sheet 3 they are combined via reference in order for me to do calculation in the input - They are combined in sheet3 as the columns are not identical.
Because the data-tables will be updated via sharepoint, i have to link to cells beneath the data-tables as i expect these will be fill out when the tables update.
My problem is that when the tables update, i dont see the updates in my "combination" sheet. it appears the the data tables add a new line, which moves my cell reference 1 line down.
Ex: Had a reference in Sheet1'E3 - after the data table updates the reference is now Sheet1'E4.
View 2 Replies
View Related
Feb 23, 2007
I have multiple textboxes that I've been trying to get a running total for. For example, I've got Amount1, amount2, amount3, etc. which should get totaled in a text box called AmountTotal. I would like this to automatically update once an amount is entered. The issue that I am having is that as soon as I try and put in a negative number in one of those boxes it returns a "type mismatch" error.
here's a sample of the code I am refering to.. How to write the code so it doesnt concatenate
Public Sub Amount2_change()
Dim a As Long
Dim b As Long
a = Amount1.Value
b = Amount2.Value
TextBox1 = a + b
End Sub..................
View 9 Replies
View Related
Jan 27, 2010
Attached is an example of the workbook I am looking for: A macro will take the sheet "Data" and split the info across into new separate worksheets labelled "SIM","MOR","RED","CAR","EMB". The split worksheets contain the same info as "Data" however the column for "Total Arrears" is sorted as descending and the moment values become negative, there is a 5 row gap to seperate the Positive amounts and Negative amounts in a descending order
What needs to be completed:
I need to create Sub Totals in columns E:K for both the negative and Postive balances (and Label them as "Sub - Total" in column D) as well as have them represented as a percentage, and then after that have a grand total value represented at the bottom. I have attached examples of what the final product should look like for each worksheet (they are labelled in blue)
The problem I have is that I am unsure of how to use VBA to recognise where to put the amounts for Sub Totals. I would assume it would use a .End.xlUp.Row and some kind of Offset, but I don'r even know where to begin. The "Data" sheet has a button that runs the macro to split the data into worksheets, but the worksheets SIM/MOR/RED/CAR/EMB must be deleted first since there cannot be duplicate sheets (which is why there is also a button to delete those sheets)
View 2 Replies
View Related
Oct 10, 2009
In an excel work shift schedule, I am trying to total the total number of days someone is scheduled for different shifts. I can get a total for the current schedule but I want to be able to have a year to date total as each new schedule is added in. These totals are in the AF through BC columns in the xray shift totals in the attached worksheet.
I don't know if it is possible or not and am working on a pre-existing worksheet.
View 9 Replies
View Related
Nov 4, 2009
Does any one know how I can resolve the calculation error that shows up in a pivot table when you select "show data as a running total in" option and you end up with a very small difference error.
In other words if I add 12.96 + 2.04 + (-15) and you get 1.455E-11 instead of zero. When these calculation errors show up in normal spreadsheet calculations outside of pivot table you can always use the ROUND function to correct these arbitrary calculation errors.
I'm looking for a recommendion for handling this in a pivot table where I have a couple of hundred columns of data that are using the "running total in" option.
View 9 Replies
View Related
Mar 21, 2009
I am a bit stuck with an excel spreadsheet I do for work and would like to ask your advise, I will try to explain as best as I can.
I am running a small store that feeds 13 buildings.
On the spreadsheet there are 13 sheets, one for each building.
The items will go out monthly.
What I need to do is record the total items from each sheet in a column called All Totals on the first sheet, this will add up the totals for all the buildings.
If I put an attachment that may help out a bit.
If you can look at P3 it is all the P3s to add together, next down will be total of P4,P5,P6.
View 2 Replies
View Related
Jan 26, 2007
I am trying to add together the total hours for a given week.The spreadsheet is used to show the total hours worked from the signing off and on times given.
CELL C11 CORRECTLY SHOWS THE TOTAL FOR ONE DAY AS 08:30 AND F11 AS 07:30. BUT WHEN THEY ARE TOTALLED IN CELL B13 IS SHOWS 1122:00 INSTEAD OF 16:00.
View 9 Replies
View Related
Dec 14, 2013
Please refer to attached sheet.
I am using the attached to schedule the employees. All I want is a formula to add up all schedule hours per week per schedule in cell R2,R3 and R4.
Book2.xlsx‎
View 2 Replies
View Related
Dec 2, 2013
My spreadsheet is set up so that Column A has dates and Column B has a value. How can I calculate the total number of values for each day of the week? I've tried a few formulas but they either didn't work or didn't actually take the value into consideration and just counted all the 'Mondays'. I'm not sure if that's clear enough, but if we're just looking at Mondays to simplify it:
Monday, 1 January 2000: 2
Monday, 8 January 2000: 5
Monday, 15 January 2000: 0
Mondays: 7
View 1 Replies
View Related
Apr 9, 2014
I have been a long time lurker of MrExcel, but have always been able to find the answer to my question within the forums. However, I am stumped. I am trying to create a pivot table that will show incremental goals by week, when I have a set goal for the month already. However, I don't want to do a straight average across all the weeks in a month. I would like to see it continually grow during the month. How can i mathmatically do that in Excel?
For example:
Jim had 191 sales leads in the last week of the month in December. Of those 191, he closed 29 of them, for a 15.2% close rate. I want to see him raise that by 6% by next December, so (6%/12 (# months) = .5%). He will need to increase his close rate to 15.7% by the end of January. So, for the month of January, we expect 955 sales leads (5*191) and 149.935 (15.7% of 955) closed. However, I don't want to say Week 1, 2, 3, 4, and 5 in January should all have 29.987 closes, I would like to be able to say week 1 = 25, week 2 = 27 week 3 = 30 week 4 = 32 and week 5 = 34, but have that incremental increase to total 149.935.
There is (sadly) no changing the percents, or the closed leads number. These have already been submitted and aproved. I just have to be able to let people see the goals by week now, but if they want to see the monthly goal, it must equal what has been approved.
View 2 Replies
View Related
