AddItem ListBox: Run-time Error 2147352571(8002005)
Aug 4, 2006
I'm trying to fill a listbox use code. The code I have is the following:
listrow = Worksheets("DATA"). Range("A1"). CurrentRegion.rows.Count
Worksheets("DATA").Range("A1").Select
For i = 1 To listrow
Cells(i, 1).Value = CStr(Cells(i, 1))
Worksheets("BOM").Lbxitems.AddItem Sheets("DATA").Cells(i, 1)
Next i
It all worked fine, and now suddently it doesnt anymore.
I get the following error message:
Run-time error 2147352571(8002005).
View 9 Replies
ADVERTISEMENT
Nov 28, 2008
I've written an Excel (using 2007, compatibility mode to 2003) app for our stock control. Basically it's a protected stock sheet which the user adds/removes stock via a form.
When the user runs the form the following code loops through the stock list header adding item names to a combo box. Problem is I get a run-time error if there's more than 60+ items but while the error always occurs, it happens at different places in additems.
Run-time error '-2147024809 (80070057)
Invalid argument.
In the code I've allowed a loop to 1000 items but in reality they'll be no more than 150.
View 11 Replies
View Related
Nov 26, 2004
I have a Listbox that has 2 columns
Using Additem how do I place data in the 1st then the 2nd column to create a list.
View 9 Replies
View Related
Jun 12, 2014
I am trying to use AddItem to add 3 columns in a listbox. (I know I can use Me.ListBox1.List=Array() ... but here I want to use AddItem)
From AddItem:
For multiple-column lists, use semicolons to delimit the strings for each column (for example, "1010;red;large" for a three-column list).
Here is my code but complete string is shown in 1 column where semicolon are visible. What am I doing wrong? I have also attached my example in a file.
AddItem_3Columns.xlsm
View 2 Replies
View Related
May 6, 2007
I have this part of code that populates my ListBox
With UserForm1.ListBox2
.AddItem ActiveCell.Offset(0, 7).Value
.AddItem ActiveCell.Offset(1, 7).Value
.AddItem ActiveCell.Offset(2, 7).Value
.AddItem ActiveCell.Offset(3, 7).Value
.AddItem ActiveCell.Offset(4, 7).Value
.AddItem ActiveCell.Offset(5, 7).Value
.AddItem ActiveCell.Offset(6, 7).Value
.AddItem ActiveCell.Offset(7, 7).Value
.AddItem ActiveCell.Offset(8, 7).Value
.AddItem ActiveCell.Offset(9, 7).Value
.AddItem ActiveCell.Offset(10, 7).Value
End With
It draws the Values (names) off of Sheet1 and ActiveCell is B26
Question one: Is there a better way of writing this and for it to stop adding to the ListBox once there is no Value in the Offset cell....
View 9 Replies
View Related
Dec 15, 2009
I have a userform (seen below) in which the user selects any number of ZIP Codes (right - ListBox2) after selecting a county/location (left - ListBox1.)
My dilema is that I need to somehow record the selections for EACH county/location, while making sure that when saving the selected ZIP's to the "Area Associations" sheet, I don't create duplicates. Of course any ZIP deselected needs to not be recorded to the sheet.
The "Area Associations" sheet is set up as follows:
[Any given row after row 1]
Column A = Area (Area is selected prior to the userform being displayed)
Column B - ??? = the selected ZIP's
The selected ZIP's do NOT have to be in any specific order, because I have a routine to search through the row looking for any instance of any particular ZIP Code.
FYI - Each ListBox is populated via .AddItem
View 9 Replies
View Related
Dec 12, 2006
I am trying to get a range from a worksheet and add it to my listbox1 on a form but i keep getting this error message.. Run=time error '1004': Method 'Range' of object '_worksheet' failed
Dim ws As Worksheet
Set ws = Worksheets("iSheet")
Dim ilastrow As Integer
ilastrow = ws.Range("A65536").End(xlUp).Row
Dim irow As Integer
irow = 0
For irow = 0 To ilastrow
If Trim(ws.Range("a" & irow).Value) <> "" Then
With ListBox1
.AddItem Trim(ws.Range("a" & irow).Value) & " - " & Trim(ws.Range("b" & irow))
End With
End If
Next
View 2 Replies
View Related
Mar 22, 2012
How I change the code below so that the ."AddItem" refers to a range within Sheet1?
For example .AddItem Worksheets("Sheet1").Range("O2:O20")
Code:
With ListBox1
.AddItem "January"
.AddItem "February"
.AddItem "March"
View 2 Replies
View Related
Dec 12, 2007
Works fine up to and including .List(i, 9) however when it bangs out with an error when it gets to .List(i, 10). Error Message reads: Run-Time Error '380': Could Not set the List property value.Invalid Property Value. If I Switch to using .column(10,i) I get the same error but for column instead
Dim cnt As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim strSQL As String, HASH As String
Dim D1 As String, D2 As String
Dim i As Long
HASH = Chr(35)
'*********TEMPINFO********
D1 = "12/3/2007" '*
D2 = "12/9/2007" '*
Agent = "Team_Stats" '*
i = 0 '*
'*************************
glob_DBpath = ThisWorkbook.Path & "databaseTS-Stats.mdb"
glob_sConnect = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & glob_DBpath & _
"; Jet OLEDB:Database Password=********;".......................
View 5 Replies
View Related
Oct 8, 2008
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
View 7 Replies
View Related
Aug 17, 2006
I am calling the following subroutine from a module (Mod_Global_Ini) for a combobox (ComBx_Supervisor) on a userform (Frm_JobCreate). why the .AddItem gives me an "Expected Function or Variable" error message?
Public Sub JobCreate_Initialize()
Frm_JobCreate.ComBx_Supervisor.AddItem = " "
Frm_JobCreate.ComBx_Supervisor.AddItem = "bp"
Frm_JobCreate.ComBx_Supervisor.AddItem = "cn"
Frm_JobCreate.ComBx_Supervisor.AddItem = "sm"
Frm_JobCreate.ComBx_Supervisor.AddItem = "jm"
End Sub
View 8 Replies
View Related
Jul 25, 2006
im using the following code to add to a combo box when a form loads
LstMullBkBx.AddItem "SCW059 - 50mm Box"
LstMullBkBx.AddItem "SCW060 - 75mm Box"
LstMullBkBx.AddItem "SCW061 - 100mm Box"
LstMullBkBx.AddItem "SCW062 - 125mm Box"
This seems to be a long way to do it. Is the a quicker way... as in
LstMullBkBx.AddItem "SCW059 - 50mm Box" & "SCW060 - 75mm Box" etc
I tried this but it adds them on the same line which is no good.
View 5 Replies
View Related
Dec 4, 2013
This is my code:
VB:
Set R = WS3.Range("A:A").SpecialCells(xlCellTypeConstants)
ListBox1.Clear
With ListBox1
[Code].....
the third column is a time, and is showing up in the actualy listbox as a decimal rather than a time. How do you show at time(ex 12:42 PM)?
View 2 Replies
View Related
May 27, 2014
This is my line of code from Userform that fills Listbox from values of cell :
[Code] ....
Value in cell is time value formatted as h:mm, but when this value is being filled in Listbox, It changes to decimal value. Example : 12:00 is 0,5 on Listbox.
How can I change this to time value in Listbox ?
Tried with TimeValue() and Format(Time,"h:mm"), but one gives me error "type missmatch", and other just gives me back system time to each Listindex.
View 5 Replies
View Related
Oct 26, 2008
why this is causing an error upon opening the file. This workbook has a userform with a listbox (single list, single selection), and when I have the ControlSource property set it causes an error upon opening the userform (which opens when the file is opened), whereas if I do not have the ControlSource property set to anything, it seems to work fine.
Interestingly, if I set the file up to not open the userform with the file, and instead have the userform open when a worksheet control such as a command button is clicked, it doesn't seem to matter if the ControlSource property is set or not. The workbook in question is attached.
View 14 Replies
View Related
Dec 26, 2012
How to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........
View 9 Replies
View Related
Oct 10, 2006
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time.
Every time I get the error, it highlights this line of
Sheets("Regenerate Request").Paste
This is all of the code up to where I get the error:
Sub YesRegen()
' after user has hit Yes on the RegenerateRequest macro, this posts the new request to
' the log, generates the new file and attaches it to an email
Application.Run "LogUnprotect"
Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy
'Selection.Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Range("A40:K40").Select
Range("A40").Activate
Sheets("Regenerate Request").Paste
View 10 Replies
View Related
May 20, 2014
I want to add a msgbox with a no selection error to a multi select listbox I have. For a dropdown I just use "if .ListIndex =-1" but listindex doesn't seem to work. I'm playing with .selectedindex but it's not playing ball
View 4 Replies
View Related
Oct 24, 2006
On a userform, I have a listbox named "eList" containing Employee Names.
I have 2 other listboxes named "List_eTrained" and "List_eNotTrained" which list the Training completed and Training not yet completed for the selected Employee.
When I click Name items, it updates both listboxes with information (using "AddItem").
Before it updates, I use this code to clear the info listbox items:
TrainingDetails.List_eTrained.Clear
TrainingDetails.List_eNotTrained.Clear
When I run the form and click on various entries, it works as expected. At random though, I get this:
Run-time error '-2147467259 (80004005)':
Unspecified error.
And only this line is highlighted in Debug mode: TrainingDetails.List_eNotTrained.Clear
Sometimes it happens after going through several names, sometimes it happens when clicking the 2nd or 3rd name. It's only happening on the "List_eNotTrained" line though--the other line is fine--which has me really puzzled.
I'm hoping someone else has run into this before and might know what's causing this random, unspecified error.....
View 6 Replies
View Related
Jul 15, 2006
I have a problem with one of my files. Each time I open it up, the listboxes keep getting smaller and smaller. I have no idea what is causing it.
View 9 Replies
View Related
Mar 5, 2013
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
View 1 Replies
View Related
Apr 26, 2009
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
View 10 Replies
View Related
Aug 12, 2009
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies
View Related
Oct 4, 2009
I was trying to use the below code
View 4 Replies
View Related
Aug 17, 2008
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
View 9 Replies
View Related
Dec 4, 2009
I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:
ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"
In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.
If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.
View 9 Replies
View Related
Oct 21, 2008
run time error 91 ...
View 14 Replies
View Related
Nov 12, 2008
I have the following code in a macro and when it is run I get a Run Time Error 438 Object doesn't support this property or method. This occurs at the first occurrance of the destination/source.
View 5 Replies
View Related
Feb 26, 2009
I have the main form completed and everything appears to be in order. So I made a button on the first sheet that simply calls for the main form to be shown. However, every time I click it, I get the run time error 424 object needed thing. I don't understand because the button is calling the form and the names are all correct. When I click debug, it takes me to the small code for the start button. Below are the codes for the start button and the main form.
View 10 Replies
View Related
Dec 11, 2009
I have a line of code to enter a date on a spreadsheet from a user form:
View 2 Replies
View Related
