This is my code:
VB:
Set R = WS3.Range("A:A").SpecialCells(xlCellTypeConstants)
ListBox1.Clear
With ListBox1
[Code].....
the third column is a time, and is showing up in the actualy listbox as a decimal rather than a time. How do you show at time(ex 12:42 PM)?
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedThis is my line of code from Userform that fills Listbox from values of cell :
[Code] ....
Value in cell is time value formatted as h:mm, but when this value is being filled in Listbox, It changes to decimal value. Example : 12:00 is 0,5 on Listbox.
How can I change this to time value in Listbox ?
Tried with TimeValue() and Format(Time,"h:mm"), but one gives me error "type missmatch", and other just gives me back system time to each Listindex.
I have a problem with one of my files. Each time I open it up, the listboxes keep getting smaller and smaller. I have no idea what is causing it.
View 9 Replies View RelatedI'm trying to fill a listbox use code. The code I have is the following:
listrow = Worksheets("DATA"). Range("A1"). CurrentRegion.rows.Count
Worksheets("DATA").Range("A1").Select
For i = 1 To listrow
Cells(i, 1).Value = CStr(Cells(i, 1))
Worksheets("BOM").Lbxitems.AddItem Sheets("DATA").Cells(i, 1)
Next i
It all worked fine, and now suddently it doesnt anymore.
I get the following error message:
Run-time error 2147352571(8002005).
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I am trying to set up a listbox on a userform that will draw from 2 columns. The first column is an abbreviation of the phrase in the second column as shown below. When the user clicks the listbox arrow I want them to see the descriptor of the 1 - 3 character code since they are not always intuitive. When the selection is made I want the form to capture only the code.
IP In Progress
AMAwaiting Materials
ADAwaiting Design
CPCompleted.
I have a Listbox that has 2 columns
Using Additem how do I place data in the 1st then the 2nd column to create a list.
i have a listbox1 with range A61:AG500
33 column
i don't want to show some column in listbox1 e.g F, G, J, K O, W, X .......
I have a four column listbox where 4th column is percentage. In my source worksheet cells are formatted as percentage but when this is displayed in list box it shows approximately 10 decimals or maybe even more. How can I change my code only to show two decimals in 4th column?
View 3 Replies View RelatedI am not grasping how to setup a multi column listbox (2 columns).
View 13 Replies View RelatedI want to fill a listbox with n columns so there is no space other than the text in it.
I have tried this:
listbox1.columncount = 2
listbox1.columnwidth(len(activecell.text);len(activecell.offset(0,1).text))
Or:
mystring = len(activrcell.value) or refer to the excel column width
listbox1.columnwidth(mystring;mystring2)
but I get an error message.
Or max of list len or something. The default width is to big and specifying the length could make it to small.
I have the following code, a checkbox and listbox on a sheet
at the moment the list box appears to the right of the column , I
want it to appear to the left of the data entry column.
I have tried theproperties on the list box itself but it just resets,
I reckon this code controls the size,shape,location of the list box.
Option Explicit
Private Sub CheckBox1_Click()
If CheckBox1 Then
ListBox1.Visible = True
Else
ListBox1.Visible = False
End If
End Sub
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
Dim Target As Range
Dim MySel As Range
Set Target = Range("VBA_Target")
Set MySel = Intersect(ActiveCell.EntireRow, Target)
MySel.Value = ListBox1.Value
End Sub
I have a database of customers in sheet1 and can search colA by using .find command and find part of text string entered in textbox1, results are filtered and shown in listbox1. my problem is the listbox is only showing 9 columns and i need 12.
i think this is because i am using the additem command.
can anyone suggest a way around this or alternative coding method??
Sub cmbFindAll_Click()
Dim strFind As String 'what to find
Dim rFilter As Range 'range to search
Set rFilter = Sheet1.Range("a2", Range("f65536").End(xlUp))
Set rng = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.TextBox1.Value
With Sheet1
If Not .AutoFilterMode Then .Range("A2").AutoFilter
rFilter.AutoFilter Field:=1, Criteria1:=strFind & "*"......................
I have a listbox on a userform and I'd like to easily populate it with all the column letters (< Excel 2007) A thru IV.
I assume my code will look something like this:
for iter = 1 to 256
userform1.listbox1.additem X(iter)
next iter
what my "X" should be?
I have a 3 column listbox on a userform. I am trying to line the columns up with some label headers on the user form.
On thsi listbox, how can I code the first column to a width of 250, the second column to a width of 50 and the third column to a width of 75?
I am having trouble returning the value of the second column in a listbox.
The listbox is originally populated with an array (vaData) from an SQL query through
With UserForm3
With .ListBox1
.Clear
.ColumnCount = 2
.List = Application.Transpose(vaData)
.ListIndex = -1
End With
.Show vbModeless
End With
and then if i try to return the value of listbox1.list(1,2) elsewhere, there is an error "Could Not Get the List Property". Invalid Argument.
Is it possible to add a format to a column in a userform listbox. I need a numberformat in the first column in the listbox. The format is 000-000-00.
View 3 Replies View RelatedI just want to know how to Autofit Column width of Listbox.
View 12 Replies View Relatedi have 2 coulmns in a listbox. The columns cant display more than 11 digits. So basically it would look like this 1.23456789E+12. I even tried playing with the Columnwidth but that didnt work.
View 2 Replies View RelatedI want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies View RelatedI am using Excel frontend and Access backend for my project. Now I want to write the code that will execute when the userform1 is loaded and populate data from Access table in to the 2 column listbox. I have written the following code but that doesn't work properly.
[Code] .....
I got an example xls but can't figure out how it's done....
View 6 Replies View RelatedI am having trouble getting my search information to show under the column headings in the listbox. My search reference is column E and I want to show the information for column F, I and A of the same row as the search match. Here is my code and a copy of the file I am using.
View 2 Replies View RelatedIs there anyway to center the data in a column in a listbox without manually adding the spaces?
View 5 Replies View Relatedhow to reference a listbox value by column? For example, I have a listbox that is populated by two text boxes. The actual list looks like this:
ItemOne 1
ItemTwo 2
ItemThree 3
And so on. With Column 1 being a string and column 2 always a number.
I'd like to be able to take all of the values from column 1 and paste them into my spreadsheet next to particular adjacent cells.
Also, I'd like to take the values in column 2 and sum them.
I have a multicolumn (3 columns) listbox that is filled from a sheet (ProductList). Col1=product code (column A); Col2=description (column B); Col3=prices (columnC). I fill it when the form loads like this:
VB:
Dim rng As Range
With Worksheets("ProductList")
Set rng = .Range(.Range("A2"), _
[Code]....
I've got a Listbox in a User form that looks at data on another spreadsheet purely for informational purposes, not to be selected. I have two problems with what it's doing:
1) There are 23 columns, of varying widths. However the listbox uses a standard width, so some items are truncated and some have too much room.
2) The data changes, and the number of rows may change from 2 to 15000. I've set the RowSource to cover the ranged from A1:W15000, but if only 2-300 lines are selected the user can't grab the scrollbar button to scroll through, but must instead use the arrow, which is rather slow.
Is there any way to set the column widths to match the data, and the Range to only go as far as the last populated row?
I'm afraid I've run into some trouble with the Listbox function, which I really love, but I can't quite get past this hurdle.
I want to have a listbox which populates by checking an entire column for values, ignoring blank cells, and, if value is present, to also check to see if any value is present in the cell one column to the right and one row down from the cell that has the initial value. If both these conditions are true, to then display both values in the Listbox. In other words, the Listbox would contain two columns.
During this routine, when checking value is present in the second cell, I'm guessing that an IF statement would increment a variable signifying the cell reference by + 1 for column and + 1 for the one row down?
the following code has been devised to populate a userform listbox ("listbox1") with seven select columns (F,H,K,L,N,O) of filtered rows of a worksheet ("Data")
Code:
Sub AddMultipleColumn()
Dim rngCell As Range
Dim wks As Worksheet
[Code]...
Regrettably, there is something amuck that is preventing it from providing the expected results. Seems as though this code wishes to process all the rows, instead of just those revealed from the filter. The routine runs indefinately, and will ultimately lock up Excel and never revealing any information. On a random stop, rngCell value far exceeded the (what I felt) to be the preferred max of 28 ... the number of rows of the filter. This routine is called from within the userform's initialization code.
Question 1 ... those that are able to shed light on the flaw ...
Question 2 ... data starts on row 6 of ther database, with rows 1-5 being header. What needs to be done, if anything, to reflect this?
And question 3 ... if the worksheet "Data" were in a second workbook , would be as simple as changing this ... Set wks = workbooks("workbook2.xls").Worksheets("Data")
