Works fine up to and including .List(i, 9) however when it bangs out with an error when it gets to .List(i, 10). Error Message reads: Run-Time Error '380': Could Not set the List property value.Invalid Property Value. If I Switch to using .column(10,i) I get the same error but for column instead
Dim cnt As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim strSQL As String, HASH As String
Dim D1 As String, D2 As String
Dim i As Long
HASH = Chr(35)
I am trying to use AddItem to add 3 columns in a listbox. (I know I can use Me.ListBox1.List=Array() ... but here I want to use AddItem)
From AddItem:
For multiple-column lists, use semicolons to delimit the strings for each column (for example, "1010;red;large" for a three-column list).
Here is my code but complete string is shown in 1 column where semicolon are visible. What am I doing wrong? I have also attached my example in a file.
I have this part of code that populates my ListBox
With UserForm1.ListBox2 .AddItem ActiveCell.Offset(0, 7).Value .AddItem ActiveCell.Offset(1, 7).Value .AddItem ActiveCell.Offset(2, 7).Value .AddItem ActiveCell.Offset(3, 7).Value .AddItem ActiveCell.Offset(4, 7).Value .AddItem ActiveCell.Offset(5, 7).Value .AddItem ActiveCell.Offset(6, 7).Value .AddItem ActiveCell.Offset(7, 7).Value .AddItem ActiveCell.Offset(8, 7).Value .AddItem ActiveCell.Offset(9, 7).Value .AddItem ActiveCell.Offset(10, 7).Value End With It draws the Values (names) off of Sheet1 and ActiveCell is B26
Question one: Is there a better way of writing this and for it to stop adding to the ListBox once there is no Value in the Offset cell....
I have a userform (seen below) in which the user selects any number of ZIP Codes (right - ListBox2) after selecting a county/location (left - ListBox1.)
My dilema is that I need to somehow record the selections for EACH county/location, while making sure that when saving the selected ZIP's to the "Area Associations" sheet, I don't create duplicates. Of course any ZIP deselected needs to not be recorded to the sheet.
The "Area Associations" sheet is set up as follows: [Any given row after row 1] Column A = Area (Area is selected prior to the userform being displayed) Column B - ??? = the selected ZIP's
The selected ZIP's do NOT have to be in any specific order, because I have a routine to search through the row looking for any instance of any particular ZIP Code.
I am trying to get a range from a worksheet and add it to my listbox1 on a form but i keep getting this error message.. Run=time error '1004': Method 'Range' of object '_worksheet' failed
Dim ws As Worksheet Set ws = Worksheets("iSheet") Dim ilastrow As Integer ilastrow = ws.Range("A65536").End(xlUp).Row Dim irow As Integer irow = 0
For irow = 0 To ilastrow If Trim(ws.Range("a" & irow).Value) <> "" Then With ListBox1 .AddItem Trim(ws.Range("a" & irow).Value) & " - " & Trim(ws.Range("b" & irow)) End With End If Next
I'm trying to fill a listbox use code. The code I have is the following:
listrow = Worksheets("DATA"). Range("A1"). CurrentRegion.rows.Count Worksheets("DATA").Range("A1").Select For i = 1 To listrow Cells(i, 1).Value = CStr(Cells(i, 1)) Worksheets("BOM").Lbxitems.AddItem Sheets("DATA").Cells(i, 1) Next i
It all worked fine, and now suddently it doesnt anymore.
I get the following error message: Run-time error 2147352571(8002005).
Im doing an assignment for my VBA class and im in a jam.I have a form with a listbox and numerous textboxes. The user is to select a name and then the information from this name fills the corresponding boxes.
First off, my teacher is horrible, i have to learn by just reading so that's why I'm so puzzled. I have an array i made by importing/parsing a text file. I've attached the .txt file for reference. I currently want to add just the names from the array to then when the user selects the name, fill the remaining boxes with the corresponding information.
This is what I have thus far...
Code: Dim nValues As Integer textFile = "C:UsersMattDocumentsemployeedata.txt" Open textFile For Input As #1
[Code]....
need it to ONLY display the name, but then display ALL names in the array. What do i need to do?
When I change the value of any one of the Listboxes, I would like to fill the corresponding TextBox. They're named:
TextBox1Amount TextBox2Amount TextBox3Amount
So, if I:
* change ListBox1Category, I want to have 20 (for example) in TextBox1Amount * change ListBox2Category, I want to have 20 (for example) in TextBox2Amount * change ListBox3Category, I want to have 20 (for example) in TextBox3Amount
So the numbers 1, 2, 3 should match. Does anyone know the code for this?
I have a conditional formula that highlights dates red when it meets a certain criteria. The file named MS Working, the conditional formatting formula (formula below) works as it should with no issues. The other file MS NOT Working, the conditional formatting formula (formula below) has stopped working as it should. What I did? I inserted a new column to the left. Where the MS Working file has only 1 column to the far left, the MS NOT Working file now has 2 columns to the far left.
It seems as if the formula adjusted itself when I inserted the new column; however, its not working.
MS Working Conditional Formula: =AND(TODAY()>B3,NOT(ISODD(COLUMN())),B3<>"",OR(C3="",C3=0),B3<>0)
MS NOT Working Conditional Formula: =AND(TODAY()>C3,NOT(ISODD(COLUMN())),C3<>"",OR(D3="",D3=0),C3<>0)
im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
I want to be able to have a macro that will compare one cell to the rest of the cells in a collum. I have used the COUNTIF() formula and it's getting on my nerves a bit because it seems as though everytime i sort the data, it totally messes up the formula (as in it changes the cell refernces to seemingly randomly generated numbers, but that is a different matter! lol). here is the formula, and it will be followed by the formula that is in the cell directly below it: =COUNTIF(F2:F65536, F2) and the one below it: =COUNTIF(F2:F65536, F3). Only one number needs to change, but when i fill down in excell, it wants to add one to every number, even when i click COPY cells... oh well. So i want to write this macro that will do just that. That way, it has fixed reference parameters e.g. F2:F65536, and one variable parameter e.g. F2, F3, F4 and so on. I'm not too savvy with this whole VBA stuff... the university insisted that everyone uses C++ nowadays, lol. I would like this macro to output its data into an adjacent cell ex. if F2 was compared, the data will be placed in H2.
In my worksheet I have a column with the number 1 in cell G3 ,I want to fill down the column with the number 1 as far as there are rows that have text in them. How do I tell Excel to fill down only as far down as the end of my table.
Is there a way to fill all rows of a column with the same formula without having to copy and paste it? My table is huge (about 6000 rows) and I need to perform the same computation on each row.
I have a column of data with various values and a bunch of blank spaces. Essentially I want to leave the values as is but fill in the blank cells with a number. I’ve written a loop to do this in VBA, which grabs the value in the cell above, but it’s somewhat slow. Is there a more efficient way to do this?
Sub Downfill(Max) ' 'This count variable is used to run the loop Dim i As Long
I am trying to fill a column with a number series starting with 1 whenever a value changes in the adjacent column. So for instance I am trying to do something like this :
I am trying to auto-fill a column based on certain criteria - in other words, fill in blank cells based on a cell above, just a little more complex version. I have added an attachment to give everyone a visual of what I am describing and then maybe this explanation will make a little more sense.
First, if you open the attachment, the left hand side is a small example of what I have. The middle is the condition. And the right hand side is what I'd like to see happene.
In the example, I am matching up a time and when I hit that time, I am adding on a certain number of miles per hours based on the condition and the cell above. Meanwhile, I am filling in the blank cells with the condition until the condition changes. So a cell is incremented based on the condition and gets its value from the cell above.
I have a spreadsheet that will eventually consist of tens of thousands of rows. Several columns contain formula's. Rather than having to "highlight" a cell and then "drag" all the way down the column over thousands of rows before finally using the "fill down" function I am needing a method to short cut this process?
Is there a function that allows you to, say, nominate a range of cells that you can fill down over? For example, starting from the last row with data entered into it down to say row 12500 i.e. D22:D12500.
Is there a way that I can make a macro that populates ComboBox1 of sheet 1 with the values in the B column, where the number of elements in the B column might be any value?
For example, if there are values in B2, B4, and B8, I want ComboBox1 to show those three values.
I have two worksheets. One that contains material pricing and another that has misc data, formulas, etc. I have 100 rows of data with 2 columns. Column A I have numerical values. Column B I have a formula =(A1/36.4)*sheet1!C7. I try to drag down the formula but the value for sheet1!c7 changes as I go down (sheet1!c8 then sheet1!c9 and so on). How can I drag down the formula and have the SINGLE value from worksheet 1 carry to all rows?
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN EA Polymer
DE MA Polymer Medium CN EA Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA" Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro: i.e ABCDCN EA Polymer Easy DE MA Polymer Medium CN EA Polymer Easy
I was used "if" condition but I can't able to run.
I have an excel sheet with 2 tabs. 1st tab provides the data for downtime of a manufacturing line. The last column (shift) is blank and needs to be filled based in shift schedule in tab2
On the 2nd tab I have the shift schedule, which tell which shift is working on particular days
Month Date 7:00am- 7:00 pm 7:00pm - 7.00am
Feb 1 Shift A Shift C
[Code] ........
Is it possible to write a macros that will look at the Date and time from tab 1 and assign the correct shift number in the shift column. For example the 1st row of tab 1 reads (Month=Feb, Date = 3:55:59 AM) so according to shift schedule it would fill C shift.
I have lots of data and to assign every event to shift # manually is not possible. So i wanted to know if there is a macros i can use to make life easier and learn at the same time
I am calling the following subroutine from a module (Mod_Global_Ini) for a combobox (ComBx_Supervisor) on a userform (Frm_JobCreate). why the .AddItem gives me an "Expected Function or Variable" error message?
Public Sub JobCreate_Initialize() Frm_JobCreate.ComBx_Supervisor.AddItem = " " Frm_JobCreate.ComBx_Supervisor.AddItem = "bp" Frm_JobCreate.ComBx_Supervisor.AddItem = "cn" Frm_JobCreate.ComBx_Supervisor.AddItem = "sm" Frm_JobCreate.ComBx_Supervisor.AddItem = "jm" End Sub
So I have exported a canned report showing me payments by day and it is EXACTLY what I need EXCEPT the dates don't repeat (and it has spaces and some headings but those aren't a big issue). Anyway, I need to dynamically fill in these dates for an entire year.
To be clearer, column A starts off with 1/1/2013 and column B has payment amount, column C check number, D invoice number etc.
But the rest of the cells in Column A for 1/1/2013 after the first row are blank until you hit the payments for 1/2/2013. Then 1/2/2013 is listed once and then blank (or junk header data at a page break) until 1/3/2013 and so on. And of course there are different numbers of payments for each day.
I'm looking to dynamically fill in the dates so that I have a real data /flat file that analysis can be run on. I have some ideas ... Could probably incorporate a "do until" statement somehow...
