ListBox 2 Column Additem
Nov 26, 2004I have a Listbox that has 2 columns
Using Additem how do I place data in the 1st then the 2nd column to create a list.
ADVERTISEMENT
Listbox AddItem Stops Filling At Column 11
Dec 12, 2007Works fine up to and including .List(i, 9) however when it bangs out with an error when it gets to .List(i, 10). Error Message reads: Run-Time Error '380': Could Not set the List property value.Invalid Property Value. If I Switch to using .column(10,i) I get the same error but for column instead
Dim cnt As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim strSQL As String, HASH As String
Dim D1 As String, D2 As String
Dim i As Long
HASH = Chr(35)
'*********TEMPINFO********
D1 = "12/3/2007" '*
D2 = "12/9/2007" '*
Agent = "Team_Stats" '*
i = 0 '*
'*************************
glob_DBpath = ThisWorkbook.Path & "databaseTS-Stats.mdb"
glob_sConnect = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & glob_DBpath & _
"; Jet OLEDB:Database Password=********;".......................
Add 3 Columns To Listbox By AddItem
Jun 12, 2014I am trying to use AddItem to add 3 columns in a listbox. (I know I can use Me.ListBox1.List=Array() ... but here I want to use AddItem)
From AddItem:
For multiple-column lists, use semicolons to delimit the strings for each column (for example, "1010;red;large" for a three-column list).
Here is my code but complete string is shown in 1 column where semicolon are visible. What am I doing wrong? I have also attached my example in a file.
AddItem_3Columns.xlsm
UserForm ListBox AddItem
May 6, 2007I have this part of code that populates my ListBox
With UserForm1.ListBox2
.AddItem ActiveCell.Offset(0, 7).Value
.AddItem ActiveCell.Offset(1, 7).Value
.AddItem ActiveCell.Offset(2, 7).Value
.AddItem ActiveCell.Offset(3, 7).Value
.AddItem ActiveCell.Offset(4, 7).Value
.AddItem ActiveCell.Offset(5, 7).Value
.AddItem ActiveCell.Offset(6, 7).Value
.AddItem ActiveCell.Offset(7, 7).Value
.AddItem ActiveCell.Offset(8, 7).Value
.AddItem ActiveCell.Offset(9, 7).Value
.AddItem ActiveCell.Offset(10, 7).Value
End With
It draws the Values (names) off of Sheet1 and ActiveCell is B26
Question one: Is there a better way of writing this and for it to stop adding to the ListBox once there is no Value in the Offset cell....
Each ListBox Is Populated Via .AddItem
Dec 15, 2009I have a userform (seen below) in which the user selects any number of ZIP Codes (right - ListBox2) after selecting a county/location (left - ListBox1.)
My dilema is that I need to somehow record the selections for EACH county/location, while making sure that when saving the selected ZIP's to the "Area Associations" sheet, I don't create duplicates. Of course any ZIP deselected needs to not be recorded to the sheet.
The "Area Associations" sheet is set up as follows:
[Any given row after row 1]
Column A = Area (Area is selected prior to the userform being displayed)
Column B - ??? = the selected ZIP's
The selected ZIP's do NOT have to be in any specific order, because I have a routine to search through the row looking for any instance of any particular ZIP Code.
FYI - Each ListBox is populated via .AddItem
Fill Listbox: AddItem
Dec 12, 2006I am trying to get a range from a worksheet and add it to my listbox1 on a form but i keep getting this error message.. Run=time error '1004': Method 'Range' of object '_worksheet' failed
Dim ws As Worksheet
Set ws = Worksheets("iSheet")
Dim ilastrow As Integer
ilastrow = ws.Range("A65536").End(xlUp).Row
Dim irow As Integer
irow = 0
For irow = 0 To ilastrow
If Trim(ws.Range("a" & irow).Value) <> "" Then
With ListBox1
.AddItem Trim(ws.Range("a" & irow).Value) & " - " & Trim(ws.Range("b" & irow))
End With
End If
Next
VBA ListBox - AddItem Refers To A Range Within Sheet1
Mar 22, 2012How I change the code below so that the ."AddItem" refers to a range within Sheet1?
For example .AddItem Worksheets("Sheet1").Range("O2:O20")
Code:
With ListBox1
.AddItem "January"
.AddItem "February"
.AddItem "March"
AddItem ListBox: Run-time Error 2147352571(8002005)
Aug 4, 2006I'm trying to fill a listbox use code. The code I have is the following:
listrow = Worksheets("DATA"). Range("A1"). CurrentRegion.rows.Count
Worksheets("DATA").Range("A1").Select
For i = 1 To listrow
Cells(i, 1).Value = CStr(Cells(i, 1))
Worksheets("BOM").Lbxitems.AddItem Sheets("DATA").Cells(i, 1)
Next i
It all worked fine, and now suddently it doesnt anymore.
I get the following error message:
Run-time error 2147352571(8002005).
Create Two Column Listbox That Will Transfer Both Columns To Listbox?
Apr 4, 2014im trying to create a two column listbox that will transfer both columns to the listbox on the right and also transfer from the right to left currently right to left works but when I trasnfer from the left to right then the right to left only one column is moved.
View 4 Replies View RelatedUsing Additem On A ComboBox From A Module
Aug 17, 2006I am calling the following subroutine from a module (Mod_Global_Ini) for a combobox (ComBx_Supervisor) on a userform (Frm_JobCreate). why the .AddItem gives me an "Expected Function or Variable" error message?
Public Sub JobCreate_Initialize()
Frm_JobCreate.ComBx_Supervisor.AddItem = " "
Frm_JobCreate.ComBx_Supervisor.AddItem = "bp"
Frm_JobCreate.ComBx_Supervisor.AddItem = "cn"
Frm_JobCreate.ComBx_Supervisor.AddItem = "sm"
Frm_JobCreate.ComBx_Supervisor.AddItem = "jm"
End Sub
Speed Up Control AddItem Method
Jul 25, 2006im using the following code to add to a combo box when a form loads
LstMullBkBx.AddItem "SCW059 - 50mm Box"
LstMullBkBx.AddItem "SCW060 - 75mm Box"
LstMullBkBx.AddItem "SCW061 - 100mm Box"
LstMullBkBx.AddItem "SCW062 - 125mm Box"
This seems to be a long way to do it. Is the a quicker way... as in
LstMullBkBx.AddItem "SCW059 - 50mm Box" & "SCW060 - 75mm Box" etc
I tried this but it adds them on the same line which is no good.
Combo Box Additem - Run-time Error - Invalid Argument
Nov 28, 2008I've written an Excel (using 2007, compatibility mode to 2003) app for our stock control. Basically it's a protected stock sheet which the user adds/removes stock via a form.
When the user runs the form the following code loops through the stock list header adding item names to a combo box. Problem is I get a run-time error if there's more than 60+ items but while the error always occurs, it happens at different places in additems.
Run-time error '-2147024809 (80070057)
Invalid argument.
In the code I've allowed a loop to 1000 items but in reality they'll be no more than 150.
Set 2 Column Listbox To Return 1st Column Value
Feb 8, 2008I am trying to set up a listbox on a userform that will draw from 2 columns. The first column is an abbreviation of the phrase in the second column as shown below. When the user clicks the listbox arrow I want them to see the descriptor of the 1 - 3 character code since they are not always intuitive. When the selection is made I want the form to capture only the code.
IP In Progress
AMAwaiting Materials
ADAwaiting Design
CPCompleted.
Time Column In Listbox?
Dec 4, 2013This is my code:
VB:
Set R = WS3.Range("A:A").SpecialCells(xlCellTypeConstants)
ListBox1.Clear
With ListBox1
[Code].....
the third column is a time, and is showing up in the actualy listbox as a decimal rather than a time. How do you show at time(ex 12:42 PM)?
ListBox Don't Want To Show Some Column
Apr 7, 2014i have a listbox1 with range A61:AG500
33 column
i don't want to show some column in listbox1 e.g F, G, J, K O, W, X .......
4th Column In Listbox As Percentage
Jul 22, 2014I have a four column listbox where 4th column is percentage. In my source worksheet cells are formatted as percentage but when this is displayed in list box it shows approximately 10 decimals or maybe even more. How can I change my code only to show two decimals in 4th column?
View 3 Replies View RelatedMulti Column ListBox :: How To Set Up
Jan 12, 2010I am not grasping how to setup a multi column listbox (2 columns).
View 13 Replies View RelatedVBA Listbox Column Width?
Jun 5, 2012I want to fill a listbox with n columns so there is no space other than the text in it.
I have tried this:
listbox1.columncount = 2
listbox1.columnwidth(len(activecell.text);len(activecell.offset(0,1).text))
Or:
mystring = len(activrcell.value) or refer to the excel column width
listbox1.columnwidth(mystring;mystring2)
but I get an error message.
Or max of list len or something. The default width is to big and specifying the length could make it to small.
Listbox Wish To Appear On Left Of Column Not Right
Aug 11, 2008I have the following code, a checkbox and listbox on a sheet
at the moment the list box appears to the right of the column , I
want it to appear to the left of the data entry column.
I have tried theproperties on the list box itself but it just resets,
I reckon this code controls the size,shape,location of the list box.
Option Explicit
Private Sub CheckBox1_Click()
If CheckBox1 Then
ListBox1.Visible = True
Else
ListBox1.Visible = False
End If
End Sub
Private Sub ListBox1_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
Dim Target As Range
Dim MySel As Range
Set Target = Range("VBA_Target")
Set MySel = Intersect(ActiveCell.EntireRow, Target)
MySel.Value = ListBox1.Value
End Sub
VBA Listbox Column Query
Nov 2, 2008I have a database of customers in sheet1 and can search colA by using .find command and find part of text string entered in textbox1, results are filtered and shown in listbox1. my problem is the listbox is only showing 9 columns and i need 12.
i think this is because i am using the additem command.
can anyone suggest a way around this or alternative coding method??
Sub cmbFindAll_Click()
Dim strFind As String 'what to find
Dim rFilter As Range 'range to search
Set rFilter = Sheet1.Range("a2", Range("f65536").End(xlUp))
Set rng = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.TextBox1.Value
With Sheet1
If Not .AutoFilterMode Then .Range("A2").AutoFilter
rFilter.AutoFilter Field:=1, Criteria1:=strFind & "*"......................
Column Letters In A Listbox
Jun 16, 2009I have a listbox on a userform and I'd like to easily populate it with all the column letters (< Excel 2007) A thru IV.
I assume my code will look something like this:
for iter = 1 to 256
userform1.listbox1.additem X(iter)
next iter
what my "X" should be?
Listbox Column Widths
Apr 13, 2006I have a 3 column listbox on a userform. I am trying to line the columns up with some label headers on the user form.
On thsi listbox, how can I code the first column to a width of 250, the second column to a width of 50 and the third column to a width of 75?
Listbox Second Column Selection
Apr 20, 2006I am having trouble returning the value of the second column in a listbox.
The listbox is originally populated with an array (vaData) from an SQL query through
With UserForm3
With .ListBox1
.Clear
.ColumnCount = 2
.List = Application.Transpose(vaData)
.ListIndex = -1
End With
.Show vbModeless
End With
and then if i try to return the value of listbox1.list(1,2) elsewhere, there is an error "Could Not Get the List Property". Invalid Argument.
Format 1 Column Of ListBox
Dec 22, 2006Is it possible to add a format to a column in a userform listbox. I need a numberformat in the first column in the listbox. The format is 000-000-00.
View 3 Replies View RelatedListbox AutoFit Column Width
Jun 18, 2013I just want to know how to Autofit Column width of Listbox.
View 12 Replies View RelatedMore Than 11 Digits Don't Display In Listbox Column
Jul 30, 2013i have 2 coulmns in a listbox. The columns cant display more than 11 digits. So basically it would look like this 1.23456789E+12. I even tried playing with the Columnwidth but that didnt work.
View 2 Replies View RelatedPut The Column Headings In Listbox Exactly As It Is In The Sheet?
Nov 10, 2013I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies View RelatedPopulate Data In 2 Column Listbox Using VBA
Jun 10, 2014I am using Excel frontend and Access backend for my project. Now I want to write the code that will execute when the userform1 is loaded and populate data from Access table in to the 2 column listbox. I have written the following code but that doesn't work properly.
[Code] .....
Fill Listbox Column Heads
Apr 28, 2009I got an example xls but can't figure out how it's done....
View 6 Replies View RelatedGetting Column Information To Show In ListBox
May 12, 2009I am having trouble getting my search information to show under the column headings in the listbox. My search reference is column E and I want to show the information for column F, I and A of the same row as the search match. Here is my code and a copy of the file I am using.
View 2 Replies View Related