Add Time Value From Sheet To Listbox?
May 27, 2014
This is my line of code from Userform that fills Listbox from values of cell :
[Code] ....
Value in cell is time value formatted as h:mm, but when this value is being filled in Listbox, It changes to decimal value. Example : 12:00 is 0,5 on Listbox.
How can I change this to time value in Listbox ?
Tried with TimeValue() and Format(Time,"h:mm"), but one gives me error "type missmatch", and other just gives me back system time to each Listindex.
View 5 Replies
ADVERTISEMENT
Dec 4, 2013
This is my code:
VB:
Set R = WS3.Range("A:A").SpecialCells(xlCellTypeConstants)
ListBox1.Clear
With ListBox1
[Code].....
the third column is a time, and is showing up in the actualy listbox as a decimal rather than a time. How do you show at time(ex 12:42 PM)?
View 2 Replies
View Related
Jul 15, 2006
I have a problem with one of my files. Each time I open it up, the listboxes keep getting smaller and smaller. I have no idea what is causing it.
View 9 Replies
View Related
Aug 4, 2006
I'm trying to fill a listbox use code. The code I have is the following:
listrow = Worksheets("DATA"). Range("A1"). CurrentRegion.rows.Count
Worksheets("DATA").Range("A1").Select
For i = 1 To listrow
Cells(i, 1).Value = CStr(Cells(i, 1))
Worksheets("BOM").Lbxitems.AddItem Sheets("DATA").Cells(i, 1)
Next i
It all worked fine, and now suddently it doesnt anymore.
I get the following error message:
Run-time error 2147352571(8002005).
View 9 Replies
View Related
Jul 11, 2014
A client buys 500 minutes of my time. In one week I spend 340 minutes on the account. I'd like a column to show Time purchased (say 500 Minutes) Time spent and a final section showing time left (but showing negative values in red)
I hope I've explained this ok but here is an illustration of what I'm trying to achieve in Excel 2011.
[URL] ...........
View 2 Replies
View Related
Jun 19, 2014
I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies
View Related
Jul 15, 2014
The code im stuck on is as below:
I am getting "runtime error 438. Object doesn't support this property or method".
[Code] ..........
So I have a formatted empty template listed as BUILD, It has two main parts, a left half that serves as a key and a right part that I want to populate with data.
So the first part of the code copies the key/margin then as I commented I want to start building sets for.
The second part of the code I'm trying to run a loop through user entered data stored in listbox2 grabbing each entry and pasting it in the first row of each set.
View 2 Replies
View Related
Feb 4, 2007
I have Listbox on my User Form with 10 items say "A", "B","C", and so on. I wnt User to select any one item or any two or three items or even all items. Whatever user selects will be transferred in one cell only like "a","C". Is it possible to do this with listbox ?
View 3 Replies
View Related
Nov 10, 2013
I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies
View Related
Jan 23, 2013
How can I fill a Listbox on a worksheet with all the work sheet names in a workbook. If one is added it will update the listbox, not using a userform. All the sheets will be hidden except main sheet with listbox?
View 8 Replies
View Related
Jul 31, 2013
I need a code to hide and unhide 6 Active=X Listboxes on sheet 2.
I need to link this to a Active=X Commandbutton.Can the commandbutton caption say hide/Unhide listboxes when selected.
View 3 Replies
View Related
Mar 13, 2008
I found a formula for calculating time in the HH:MM AM/PM
=IF(B1<A1,B1+1,B1)-A1
This formula was to give me total hours in the cell for which it is entered, and cell format for the formula was in military format.
I cannot find this post. The formula worked in OpenOffice Calc program, but when it came to converting to excel, I came up with #value!
I want to enter the time in 12 hour format and using am/pm to designate. I am making it for someone to make work schedules with and they do not know military time.
View 11 Replies
View Related
Aug 12, 2009
I am making a time sheet for work. It should be very simple but cant get it to work. I want time in, time out, lunch column, and Total. I don't want a lunch in and a lunch out though just a section where I can put my time in :30 minuets :45 or what ever. I also want it to work. on a 12 hour clock AM/PM .
Here are my column's
B2 Is Time In
C2 is Time out
D2 is Lunch time ( decimal ? )
E2 is the TOTAL with lunch deducted.
View 9 Replies
View Related
Sep 30, 2013
I have a big sheet and i want to create a mask where i can insert a value and in a ListBox appears all accurrences of this value and the other in the same row.
I created a listbox where, with the RowSource proprety show me LAST row where there is the value i want. Now i want a list of rows not continous in the sheet. For example i have this sheet:
A1 Jim B1 23 C1 1998
A2 Steve B2 27 C2 2010
A3 Francis B3 23 C3 1992
Now i want to search all people with 23. So i want in my ListBox appears:
A1 Jim B1 23 C1 1998
A3 Francis B3 23 C3 1992
View 4 Replies
View Related
Apr 24, 2012
I want to select single items in list box available to move to specific worksheet.
View 14 Replies
View Related
Feb 3, 2014
I have a userform that search for a value in column A, it displays the results in the listbox. Example: Search for value "111" and it brings me back the following results back in the listbox "111 David 35". So this means 3 columns matching data is returned.
I want the following to happen if I double click on the item in the listbox it needs to update the value selected in the worksheet eg. strikethrough the row on the sheet to show item has been selected/done.
Code for my listbox populate:
[Code].....
View 1 Replies
View Related
Jan 29, 2007
Is there any other way to get data from sheet other than using rowsource because the data retrieved is going to based on the selected sheet's name since there are a lot of sheets .
example :
When i enter number 1234 inside the textbox to search, the data from cells in sheet 1234 will appear inside the listbox.
View 3 Replies
View Related
Feb 19, 2007
i have this code to populate the worksheet from listbox selections, but it only works on a 'one at a time' basis.
Private sub cb1_click()
Dim i As Integer
Dim Ltm As String
With ListBox1
For i = 0 To .ListCount - 1
If .Selected(i) = True Then
If Ltm = "" Then
Ltm = .List(i)
Else
Ltm = Ltm & ", " & .List(i)
End If
End If
Next i
End With
With ActiveSheet
.Range("B" & .Rows.Count).End(xlUp). _
Offset(1, 0).Value = Ltm
End With
For i = 0 To ListBox1.ListCount - 1
ListBox1.Selected(i) = False
Next
what i am trying to do is once i have checked several items in the listbox is have all of the checked choices fill iin column B at once.
View 9 Replies
View Related
Dec 21, 2006
iam trying to populate a listbox with only the workbooks hidden sheets. iam trying to adapt this code which i found in the forums
Private Sub UserForm_Initialize()
Dim wsSheet As Worksheet
Dim lngIndex As Long
With ThisWorkbook
Redim strarray(.Worksheets.Count - 1, 1) As String
lngIndex = 0
For Each wsSheet In .Worksheets
strarray(lngIndex, 0) = wsSheet. Name
lngIndex = lngIndex + 1
Next
End With
With ListBox1
.List = strarray
End With
End Sub
View 7 Replies
View Related
May 25, 2007
I have created a userform in excel with a listbox that has the names of 4 different sheets located within that workbook. I would like for whenever a name of the sheet is highlighted in the listbox, that sheet is opened. I have played around with the listbox.value and if then statements and can't seem to get it to work.
View 2 Replies
View Related
Jun 27, 2014
In the attached abbreviated example, what should the second line in each of the three macros read to direct the hiding/unhiding of rows in the adjacent sheet? Right now I'm trying a If/Then configuration but it's not working. I was able to figure this out using grouped check boxes but a list box should be graphically "cleaner" and hopefully simpler in coding. The original table list is hidden in column "A", if that is important. I could use a combo box but the menu list is short and I think the list box approach will be simpler.... If there is a way to combine the three macros into one.
View 2 Replies
View Related
Jul 27, 2014
Can you display items from 1 column on a worksheet in 2 columns on a Listbox?
This is to avoid having a Listbox that is too long for the form, (I know I can use a scrollbar and I am but I would still like it shorter if possible).
View 7 Replies
View Related
Jan 21, 2009
I have a userform with a multi select listbox and 7 textboxes and a sheet with all the data on called "Metdata"
See "Metadata" sheet data below:
I want to:
1. Populate the Listbox1 with the data from column A, which starting at cell A3 and down until cell/row is blank. In the example "Metadata" sheet below I only two rows are present but that will increase to 200+ rows.
listbox1 = data from column A starting A3.
2. When the user selects a single item in the listbox1, I want the 6 textboxes to be populated with the data from the other columns related to the row selected as follows:
textbox1 = column B - starting cell B3
textbox2 = column C - starting cell B3
textbox3 = column D - starting cell B3
textbox4 = column E - starting cell B3
textbox5 = column F - starting cell B3
textbox6 = column G - starting cell B3
Every time the user changes the item selected in the listbox1, I want the textboxes to be populated with the data from the corresponding row selected.
3. When the user selects more that one item from the listbox I want all the textboxes to be locked = true and textbox7 = "Multiple files Selected"
Obviously when a single selection is made from listbox1 that all textboxes are unlocked for use....
View 9 Replies
View Related
Nov 28, 2007
I have a spreadsheet in Excel, there are 13 columns of information being used. 3 of the columns have just data I typed in (model name, item code, original price) the other 10 have formulas (these formulas are price discounts that will be taken off of the original price. 9 of them also have a check box on the top of the column so if the the checkbox is selected, the formula will give the customer the amount discounted off the original price(keep in mind that not all of the columns can be used together, for example, on product "A" maybe only 3 of the boxes can be used whereas on another product maybe 5 can be used). I made a multiple listbox, so that if a customer selects a product or multiple products and clicks the ok button, the sheet will only show the specific products they selected. My problem is that when I press the "OK" button nothing happens. I don't know how to link all of this together.
View 3 Replies
View Related
Jan 14, 2008
On sheet1 I have four listbox and when user select items in listbox then macro copy some range from sheet vj and paste them on Sheet1.
But I have to problems with this macro:
1. I want to copy range instead of row
2. How to change macro if I have two or more listbox.
Private Sub CommandButton1_Click()
Dim mpRow As Long
Dim i As Long
View 9 Replies
View Related
Apr 21, 2014
I have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......
I want that excel should automatically identify the site and calculate its outage with the following formula:
Outage %age= Total Outage(min)/100.80
and add it in the respective column while identifying the outage.
e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.
e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins
Now %age outage will be
Outage %age= 50/100.80
Outage %age=0.496
Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"
Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.
View 1 Replies
View Related
Feb 27, 2014
I've created a macro that loads a listbox with the sheet names from another workbook. It works fine with Excel 2007-2010 but some reason fails with 2013. It doesn't crash, it just doesn't add items to the listbox nor doest it add the caption to Userform1.Caption. It does launch the form. Here is the code snippet:
Code:
'open read-only
wbkpath = Sheet3.Cells(1, "f") 'full pathway to source workbook
Workbooks.Open Filename:=wbkpath, ReadOnly:=True
Set swbk = ActiveWorkbook
swbk.Activate
[Code] ...........
View 2 Replies
View Related
Dec 4, 2008
I have this script (below, Krishnakumar orignally provided this script).
I'm trying to edit it to add cell values from cells C16 and E16 along with the worksheet name it displays in listbox2. So lets say worksheet "rollover" is the sheet being displayed in the listbox2.
I would like for it to look something like this:
rollover TT:'data from cell C16' TA:'data from cell E16'
Public FilePath As String
Public dic As Object
Public oWB As String
Public oWS As String
Public aWS As Worksheet
Private Sub CommandButton1_Click()
Dim i As Long, wb As Workbook, n As Long
With Me.ListBox2
For i = 0 To .ListCount - 1
If .Selected(i) = True Then
oWS = .list(i)
Set wb = Workbooks.Open(FilePath & oWB, UpdateLinks:=0)
wb.Sheets(oWS).Activate
Exit For
End If
Next
End With
End Sub
View 7 Replies
View Related
Feb 22, 2008
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Sheet1.UsedRange
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
View 5 Replies
View Related
May 1, 2014
I have two lists mainly TV Brand & There Models.
List 1 (TV Brand)
Sony
LG
Samsung
Depended List 2 (Models)
Sony LG Samsung
EX420 55EB9600 PL43E450A1FXZP
EX430 77EC9800 PL43E490B4FXZP
EX550 55EA8800 PL43E400U1FXZP
EX520 KN55S9C UN32EH5300FXZP
EX645 55EA9800 PL64E8000GFXZP
I'm using two Listboxes (Form Control) with multiple selection options namely Listbox 1 (Brand) & Listbox 2 (Models). I want listbox 2 input range to be depended on selection made on Listbox 1 (Brand). For example, if user selects Sony then box2 should show only Sony's models and if user selects Sony & LG, box2 should show models for both Sony & LG.
View 3 Replies
View Related
