I have a spreadsheet with a number of tabs and I want to add a logo to the header of each tab. My question is this: Do I have to add the logo to each header of each tab "one at a time" or is it possible to (somewhere) select and apply to all tabs?
View 1 RepliesI am trying to fix the headers of this table. Basically, I want to:
*Copy the information that is below (dates) the "Principal header" (Sales Units, M's, Currency) +
*Adding that info to the principal header without overwritting the original informaton. Ex: Sales Units Jan 13 - Jan 13, Sales M's Jan 13- Jan 13 etc..
If I post a logo into a cell of a table, and then later move the table, the cell won't move with it. How do I set it so that the image is locked into the cell of the table? I've tried googling it but all I get are results to set the background of the cell to be the image, which isn't what I want.
View 7 Replies View RelatedI have 40+ reports that I generate weekly for different clients.
I have the workbook set up so that each report is in a new sheet/tab and have a macro that runs through and saves each report as a PDF using the file name I desigate in a cell within the sheet.
My clients are now wanting the reports individualy branded to them.
My thinking is that I can list each clients name, phone, website, etc. in a new sheet then develope a marco that runs through and save the reports with row 2's infomation filled in on the reports, then row 3's and so on but one I don't know how to create a marco to do that and two they also want their logos on the reports.
Can I place an image in a cell and have it called into another cell? Can I place them all in a folder and have it call the image in based on the location and name?
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
View 5 Replies View RelatedI just joined this message board after having very little success in altering my VBA code. I have a data file and when I run the VBA code, it only works partly. Currently when I run the code, it will create new month headers, but only for a 12 month period and it is based off the current date on the computer. I need this to go to whatever specified date range I choose and I especially need it to go for more than 12 months. I am also having some issues because when my code runs, it is not running back far enough and there are gaps in the analysis that it does. For instance, after changing the time on my computer to 2009, project A and B's data stops in June 2009, even though the define phase is occuring before that. I have attached the code.
View 14 Replies View RelatedI am having an issue with Headers across a workbook. I have a workbook that I have set all of the headers so they are consistant across all sheets however when I move a sheet from another workbook I am unble to apply the header to this new sheet. I have tried selecting all the tabs and the going into Page Layout- Page Setup-Headers and selecting OK to apply to all the sheets but this does not work. I am having to delete the headers and redo them each time.
View 1 Replies View Relatedfunction where in if i pass header name and row number to the function it should search for the header name and return a boolean value back to the main function which returns 1 on finding a header and 0 if it dose not find a header.
View 4 Replies View Relatedon a vb user form list, made from the control toolbox
I enable collumn headers but have trouble populating them
From what i could get from google, it seems the only way to populate them is by having the data on an excel sheet. Can you just do it through code?
I have another list which the data is on an excel sheet but I can't get my headers working.
I have been using
frmAct.listCodes.RowSource = ("A1:C39")
frmAct.listCodes.RowSourceType = ("Value")
It doesnt like "Value"
In the attached file is it possible to use cell/ array formula in cells P3 to R6 to lookup names (Column O) within the data range (Columns A - M) and return the values shown in the yellow shaded area?
View 8 Replies View RelatedI have a table that needs headers assigned to it. I have copied a link to view the example spreadsheets. The first sheet has the table and the second sheet has the headers. The code is designed to go to sheet 1 see what file name is being used and assign the header to the file name. Each file has two columns of data for Location 1 and Location 2, but have the same file name so it's assigns the first header, but ignores the second header. How to fix it so that it assigns it by the file name and also if it's Location 1 data or Location 2 data.
[URL]
VB:
Code:
Sub FindHeaders()
Dim iRowH, iColH, iRowD, iColD As Integer
Dim strHeader, strData, strTitle As String
[Code].....
I have a long growing statistical report(18 pages + more), and 14 of the pages will use report table headers. I went into the page set up and selected the row to repeat on each page. I do not want the table headers on any pages after 14. The rest of the report is formatted differently and does not use the row headers. but all of the information is related. Is there a way to only show the row headers up to page 14? I can't use headers and footers, of course. The report will be set in one place and the user will print it out once a week. It seems as if this cannot be done but I this is my last resort.
View 4 Replies View RelatedI would like to update a template I use monthly to create a financial projection report. One cell on the report indicates the reporting date. I need to report twelve months projection. The report header has twelve columns with formulas related to the reporting date in their headers.
As soon as the report date updated all columns update their names as well. Please see the attachment, EXAMPLE 1. I would like to convert this report table to the list, but as soon as do this my formulas dissapear from the list headers and live just names. Please, see the attachment EXAMPLE 2.
I fould tricky way to avoid this problem by adding additional row to the header and living names outside of the list, but I don't like it and it also affects the report view.
I have a Workbook that has 12 worksheets in it, one for each month (January '14, February '14, ect.). Each sheet is identical with A1:Q1 being the same headers on each. I need a way to consolidate each sheet into one new summary worksheet. The issue I'm having is with the headers being copied multiple times on this new summary worksheet; appearing when a new month is listed. Row 1 of the summary sheet should be the header row and the following rows the data found on each monthly worksheet.
View 1 Replies View RelatedI have numerical headers in each column that I am trying to sort in descending order (Most to Least) . I have about 9500 columns to sort. i am just looking to move the columns in a sort order not actually sort the data in the columns. Here is a sample below.
From this:
HTMLSheet3 Â ABCDEFGHIJKLMN
113648576535355315071349485476152746320913334742372721211628213677181341133173311312012040
114169400000200021040544100412070185414260509119080360310070020100401200118103446282223023310120122413
to this:
HTMLSheet2 Â ABCDEFGHIJKLMN115271364134913338576535355315074854764744632092773724127212116281361318133401016733
113121209114420040000200010518401441004127025463600105091198000371200102010401008101100243446282223233132012
I have a report that was built using Crystal Reports that I export into an Excel worksheet because, well, it is typically easier to pull in the additional data I need. I am writing a macro to do the formatting and such and wanted to find a better way to add column headers to the report but I can't seem to make it work.
I have other workbooks where I have to do some extensive formatting that I use application.transpose (array... to get vertical labels down a column, but I can't seem to find the verbiage to do the same thing across the top. I would put the header labels in the Crystal Report but the formatting always seems to be out of kilter when I do that so I am only importing the data from the report.
I have a pivot that links to another tab, which has items categorised by Date ranges i.e. Date Group 1, Date Group 2, Date Group 3 and Date Group 4.
Sometimes none of the items will fall into a date group i.e. there is no date group 1's for that period, but my pivot simply removes the whoel date group 1 column when refreshed whereas I would like the pivot to always have the 4 headers and quote 0 if there is none in that category.
I'm trying to find out how to hide just the tab headers on a multipage object. I see alot of posts on the forum that say how to hide the entire page, but I just want the tabs (headers) invisible.
View 9 Replies View RelatedI have the regular headers in the first row, followed by rows containing my data. And at x number of rows, a new row containing headers appear again, followed by rows containing data. This goes on for the rest of report. What I need to do is remove the rest of the headers and lines because I only need to have one header in the first row.
Note that the header takes up two rows (one for the actual headers and one for the ====== lines. So removing the repeated headers is removing 2 rows.
For eg, part of the report looks like this:
PRODUCT PRODUCT NAME ==============================================12342EXAMPLE PRODUCT 122525EXAMPLE PRODUCT 2 35476EXAMPLE PRODUCT 3 53467EXAMPLE PRODUCT 4
PRODUCT PRODUCT NAME ==============================================135892EXAMPLE PRODUCT 5
The raw data that I download breaks up the header into 5+ rows.
Ex: "Patient Med Rec No"
Would be all in column E but in different rows:
Row 1: Patient
Row 2: Med
Row 3: Rec
Row 4: No
Some have 5 rows of headers, some with 1 so its different for each header title.
Sometimes I have over 30 columns to fix.
Is there a way to insert a new ROW at the top and concatenate everything? Even if some rows have blanks and possibly more that 5 rows?
I am about to re write my vba project as I can see that I need to make it more robust. One of the main issues I have is that the source XML file is not controlled by me. The quality and content is consistent but sometimes the order of the columns is different. At the moment that totally throws out my macro as it relies on certain columns for certain functions.
Trying to nut out the best way to import an XML file, keep only the specific columns I want - by content not location so then all follow on formula's will work and reference the correct data.
I have one theory that I can't get going. I thought if using defined names based on column headers this would allow me to keep and sort the columns I want. I can't find any examples to support this. I have been looking at the advanced filter but most examples reference exact cells which isn't flexible and leaves open to wrong data being pulled. Since I can't control the source doc what can I do?
I have a a client who sends me an excel workbook quarterly. There are 90 worksheets and each has 20 language columns which are suppose to be the same on each worksheet.
My Problem is I want to merge them into one worksheet so i can add them to a database, but the client keeps changing the order of the languages!
So as an example I need to be able to identify the Polish, Russian and English columns on every worksheet and then combine each language to a new column on a new worksheet.
Is there a way to print my columns headers in every page?
Everytime I have to print my spread sheet, I always have to keep page#1 in hands, because I cannot remember the headings.
I have attached an extract from a Conveyor drum design document.
Cell E7 contains a relatively simple formula to extract data from the supplied table. I have tried time and again to make this work, but the best i can come up with is the formula shown, which returns an incorrect value.
My and a work college needed to combine our separate excel worksheets into a single document.
Office 2013 didn't have a function to "import sheet from file" so we used open office to import my .xlsx worksheets.
After we finished importing we exported the final workbook as .xls (so I could open it).
After opening the workbook on my pc (excel 2013) i notice some of the sheets no longer have column headers, but the row headings still exists. (No ABCD, only 1234)
Also I am unable to use features such as "Freeze Pane"
I suspect this was caused by importing and exporting through open office?
Is it possible to have table headers that are down the side instead of going across the top?
I have searched but have not found an answer so far.
How do I set up the formula bar so it doesn't cover the column headers?
View 1 Replies View RelatedI want to return the column headings (the months) where there is a 'No' value, per person. How to do this?
Here's the screenshot
Screen Shot 2014-03-17 at 11.45.34 am.png
And here's a dummy version:
Example Spreadsheet.xlsx
I did not want to bother you again but I have a problem that I can not solve it because my knowledge in vba etc, are limited and could not become to find with Macro Recorder.Usually I solve the problems on my own by searching on Google and experimenting with ready Macros and Macro Recorder.
I have an excel file with a macro and I want before this macro launched, to run another macro that can check if the headers have the correct name and in its correct position. The headers is in first Row.
If are not in the correct position or if it doesn't exist or if not have the correct name, then the process of the next macro be stopped and of course be informed that there is a problem.But if Is everything okay, then proceed to the next macro and be informed that Is everything okay.
I have attached a Sample file with the headers i'm using.
Sample...xlsm
[Code].....
I have a spreadsheet with multiple sheets, which can vary from project to
project, and they all have the same center sections of the headers. Is there
any way to automate the filling in of all these headers based on the first
sheet?