Check Headers And Stop Next Macro If Its Different?
Aug 11, 2013
I did not want to bother you again but I have a problem that I can not solve it because my knowledge in vba etc, are limited and could not become to find with Macro Recorder.Usually I solve the problems on my own by searching on Google and experimenting with ready Macros and Macro Recorder.
I have an excel file with a macro and I want before this macro launched, to run another macro that can check if the headers have the correct name and in its correct position. The headers is in first Row.
If are not in the correct position or if it doesn't exist or if not have the correct name, then the process of the next macro be stopped and of course be informed that there is a problem.But if Is everything okay, then proceed to the next macro and be informed that Is everything okay.
I have attached a Sample file with the headers i'm using.
Sample...xlsm
[Code].....
View 5 Replies
ADVERTISEMENT
Jan 3, 2013
I decided to format my data as a table so that excel will auto-fill my formulas when inserting new rows which works quite well. I have one snag though, when trying to insert a new row at the very top (i.e. inbetween the header and first row) and choosing Format As Below, it also applies Data Validation and Conditional Formatting to the header. The inserted row, however, is actually formatted fine and works well.
How do I stop this from happening, and why would Excel do this anyway (as it is effectively applying formatting to TWO rows when only one row is being inserted)?
View 3 Replies
View Related
Dec 13, 2006
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies
View Related
Jan 15, 2014
I have a column with rows having strings as below (see sample.xlsx excel attached) .
I want to delimit the string in such a way that the for each parameter, the parameters will beome columns with headers and the value against them will be shown in thier respective column. The output tab in the attached excel might make what I am trying to convey more clear.
So basically CPU should have its own column and its time against it.
There are thousands of such column that we wish to analyse and therefore the ask.
I tried various option to delimit including recording a macro but did not work
CPU: 5,622.871 ms, Sync: 0 ms, Wait: 0 ms, Suspension: 2,399.921 ms
View 9 Replies
View Related
Apr 11, 2014
I'm having an issue where I have a macro (see attached file) that is supposed to auto-fill and sort. Twhen it tries to run the auto-fill on a sheet in its blank/template state. It will take my formulas in columns AC:AZ and fill them up to the header row.
[Code]....
This code was hobbled together using record macro and my minor understanding of coding.
(CK) Macro issue.xlsm
View 7 Replies
View Related
Mar 11, 2014
I'm using this Macro to merge 40+ reports. It works great except it keeps pulling the headers over.
This wouldn't be that big of a deal, except that for every report I merge I have to click "OK" approx 10 times because the lines have the same title.
Is there a way to prevent this?
Sub simpleXlsMerger()
Dim bookList As Workbook
Dim mergeObj As Object, dirObj As Object, filesObj As Object, everyObj As Object
Application.ScreenUpdating = False
Set mergeObj = CreateObject("Scripting.FileSystemObject")
'change folder path of excel files here
[Code] ......
View 5 Replies
View Related
Apr 24, 2014
Ceating a macro to perform a look up and return based on column headers.
General Synopsis: Using a call and parameters to choose a lookup column and return column, and their respective sheets. Then the sub routine finding their respective column headers and perform a lookup/return. Essentially the current problem is the macro runs to slowly.
Link to original post: Lookup Macro based on column headers
View 1 Replies
View Related
Apr 9, 2014
Can't seem to attach sample Widgets.xls. I need a macro to take the heading (note heading not sheet name) from each worksheet on a workbook (or from a range of nominated worksheets in case I don't want to index the first or last few sheets) and use it as the Description for a Index entry on a nominated sheet e.g. Sheet named 'Index'. In addition that each Description is also a hyperlink back to the sheet with the heading. In this way users can click between each entry on the index to go to the sheet and then click on the heading on the sheet to go back to the index.
Index Sheet
M21, M22 and M22-A BICYCLES1
Q21, Q22 and Q22-A BICYCLES2
R21, R22 and R22-A BICYCLES3
Taking this one step further I ideally want to save this workbook as a pdf and the hyperlinks to remain.
View 4 Replies
View Related
Jun 28, 2008
My problem is that the data I want to add to the headers is in another sheet. Is there a way to modify this code.
1. Currently I have an excel sheet with macros that open other workbooks.
2. I select the macro to open a saved workbook. lets call it "apples"
3. I want to modify "apples" footers.
The data to insert in the header is located in my original workbook with the macros in a sheet called names. Here is the code I would like to modify:
Sub Create_Header()
With ActiveSheet.PageSetup
Dim lh_top, cntr_top, rh_top
lh_top = Cells(3, 2)
cntr_top = Cells(6, 2) & vbLf & Cells(7, 2)
rh_top = Cells(4, 2) & " " & Cells(5, 2)
.LeftHeader = lh_top
.CenterHeader = cntr_top
.RightHeader = rh_top
End With
End Sub
View 2 Replies
View Related
Nov 27, 2009
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
View 9 Replies
View Related
Jun 7, 2014
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
View 5 Replies
View Related
Apr 16, 2009
I have a IF formula that check if “F13” cell is "+" if not do calculation (F13-E13) and stop, if yes go to the previous line and check if the “F12” is "+" if not do calculation (F12-E12) and stop, if yes continuo to the previous cell and so on until you find cell without “+”
The EXCEL IF formula is
=IF(F13="+",IF(F12="+",IF(F11="+",IF(F10="+",IF(F9="+",IF(F8="+",E8-F8),F9-E9),F10-E10),F11-E11),F12-E12),F13-E13). I'm looking for VBA code with FOR to run and do the same without the limitation of 7 if inside if.
View 3 Replies
View Related
Jul 28, 2006
I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
View 6 Replies
View Related
Mar 7, 2007
i need to make a button that Immidiately stops all macro's, Or (and This will maby be little more difficult) Stop all macros on a specific time inserted in 1 cell
the macro's that i want to stop running, are all single macro's which i activate with only 1 button i created.
i like something like this:
if "A1"(this is the cell where i have my updated clock) == A2 (the time i insert here stops the macro's at this time) do stop Macro's
View 9 Replies
View Related
Mar 26, 2009
If you run it now, ctrl t, it produces letters and changes alphabets as it hits a yellow box. If i change or add a yellow box, the letters change fine. The macro works perfectly, but instead of inputting the range or K3 to what ever, i would like to to run this macro and stop once it sees the row with the sort number of 4. ( this changes row postion depending on which sheet im working on, this is the problem).
View 4 Replies
View Related
Apr 27, 2014
I tried the belwo code to stop Macro if column "A" has the value "#NA" but i am getting error.
{if the Value "#NA" not in the column "A" then macro can continue to run}
[Code] ......
How to rectify the error.
View 10 Replies
View Related
Aug 10, 2009
I have a spreadsheet containing a macro to automatically sum values from week to week and display the max/min and average. This is almost fully working. The problem I have is the macro copies the sum formula down the page and doesn't stop at the last row. It always adds one or two extra rows. The formula should stop at row 77 however this does not happen and therefore the sum keeps going. Which in turn, distorts the max/min figures.
View 2 Replies
View Related
Mar 13, 2012
I'm trying to create a macro to input information into a cell then repeat until the information stops.
So say I have 10 rows of information that fill up A1:D10. in E1:E10 I'd like a macro to insert some data into E1 then go to E2 and do the same until the end and then stop. So since A11:D11 would be blank the formula would just stop.
I actually work on 100's of cells a day and this is for a bigger project I'm trying to put together or I would just drag.
View 7 Replies
View Related
Jun 17, 2014
I need a code that will stop a Macro if any cell in column 3 equals #N/A All i have right now is:
If Selection.Columns(3).Columns = "#N/A*" Then
MsgBox "Incorrect Value"
Exit Sub
View 8 Replies
View Related
Jan 6, 2009
I have got he below code in "thisworkbook" it works fine but I have a problem with it if it has been closed before the time expires. If it is closed it tries to reopen it and then close it again. So for my users who have got their security set to prompts the file will be closed and a message box appears saying "enable or disable Macros". If it is already closed than i dont really want this to happen. My security is set to low but i still see it flash up and the bottom then dissappear again. How can i get the Macro to stop if it has already beed closed??
Private Sub Workbook_Open()
Sheets("database").Select
Range("au16").Select
Application.OnTime Now + TimeValue("00:15:00"), "TimeOut"
If ThisWorkbook.ReadOnly Then
MsgBox ("The file is currently being used by another user, please contact them to ensure they have not left the file open.")
ActiveWorkbook.Close SaveChanges:=False
End If
End Sub
Sub TimeOut()
ThisWorkbook.Close SaveChanges:=True
End Sub
View 9 Replies
View Related
Jun 24, 2006
I am running a macro that populates the same chart with variable data. I have approximately 40 sets of data and wish to pause or stop the macro to view one of the sets of data more closely. The pause option would be better but Stop option is acceptable
View 2 Replies
View Related
Jan 18, 2013
I am trying to use a macro to check if any cells in a range of cells are less than 0 before proceeding.
VB:
Sub Macro()
If Range("F2:F49") < 0 Then
MsgBox "Please verify column F."
Exit Sub
[Code] ....
View 2 Replies
View Related
Jul 3, 2014
I have macros that often pause for the user to take some action -- for instance, to confirm that the correct cells are selected, or to delete something. Usually I use the "Stop" command, which opens the VBA editor; when I finish doing the manual action, I just resume the macro.
When writing macros for actual users, I'd like to do the same thing without their having to deal with the VBA window. Is there a way to pause and resume action and remain in the Excel window?
View 3 Replies
View Related
Sep 25, 2008
I have the following macro to recalculate the time every second on opening a spreadsheet
Sub Auto_Open()
Calculate
Application.OnTime Now + TimeValue("00:00:01"), "Auto_open"
End Sub
Looking for the code I need to add that will stop the macro when the file is closed.
View 7 Replies
View Related
Dec 16, 2008
how to stop macros running on a particular worksheet within a workbook. I have a workbook monitoring vehicle faults with a control sheet. The control sheet displays the reg no and a "traffic light" indicator highlighting faults next to the reg no. Traffic light is turned red and green by If blank control. Each vehicle has a worksheet where faults can be recorded and a menu bar at the bottom of the screen operates numerous macros to "email worksheet"-"clear and copy to history" etc etc. The menu bar though can also be viewed and operated while in the control sheet. If a macro is activated within the control sheet it destroys it as it was not designed the same as the worksheets. Can I programme the menu to be inactive when in the control sheet OR that the menu will only appear when in every other sheet.
View 3 Replies
View Related
Aug 20, 2009
Example: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.
My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2
View 4 Replies
View Related
Jan 20, 2010
I've got a series of macros in place which, essentially, download several CSV files into a temp directory, then opens each and copies the data into a single workbook (one sheet).
What happens is that the some number of the sheets don't actually open until the macro stops. I've tried using the wait (Application.Wait Now + TimeValue("00:00:10")) and sleep functions, but it's not quite doing what I want.
What I'd LIKE to do is have the macro actually STOP processing for 10 seconds, then proceed (or start a new macro).
I've also tried putting the wait behind a button in a userform, which is non modal... the csv files open until the user clicks the button.
View 9 Replies
View Related
May 11, 2012
I have the following macro
Code:
Sub del()
Dim myRange As Range
Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row)
For i = 1 To myRange.Rows.Count
If myRange(i, 1) >= myRange(i, 2) Then
myRange(i, 1) = ""
myRange(i, 2) = ""
End If
Next i
End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
View 1 Replies
View Related
Jun 7, 2013
On a worksheet I have a command button that displays a ConfigureCatalog form.
Code:
Public StopRequested as Boolean
'Worksheet Command Button will display the Configure Catalog Form
Private Sub CmdConfigure_Click()
CatalogConfigForm.Show vbModeless
End Sub
The ConfigureCatalog userform has two Command Buttons: cmdRebuildCatalog, and cmdStop. RebuildDSWCatalog is a macro that reads and analyzes just over 35,000 records and updates other worksheets. As it runs, it repaints the CatalogConfigForm with a progress message every 100 records. It can run for about 3 minutes. I want to provide a "STOP" button that will allow the user to interrupt the RebuildDSWCatalog macro and return control to the user.
Code:
Private Sub cmdRebuildCatalog_Click()
StopRequested = False
Call RebuildDSWCatalog
End Sub
Private Sub cmdStop_Click()
StopRequested = True
End Sub
While processing the 35,000 records, I want the RebuildDSWCatalog macro to check whether StopRequested has been set to TRUE prior to processing the record. If StopRequested = TRUE, I want to drop out of the macro.
Code:
Public Sub RebuildDSWCatalog()
StopRequested = FALSE
For DSWRecord = DSWStart To DSWCount
If StopRequested = True Then
[Code] ....
Problem is that once the RebuildDSWCatalog macro starts running, the STOP command button never seems to get the focus back. All other input is inhibited until the macro ends.
It just ignores that I'm hitting that STOP button. In fact, the button doesn't visibly respond at all until RebuildDSWCatalog finishes processing all 35,000 records.
View 4 Replies
View Related
Oct 12, 2007
I am trying to speed up this macro, ive already tried turning screenupdating and calculation off, but it still takes forever, and I dont understand why.
The code is basically searching for a given string in column E. There are about 9000 lines to my sheet, which shouldnt take more than a 30 seconds to a minute to complete.
Private Sub CommandButton1_Click()
Application.Calculation = xlCalculationManual
For MY_ROWS = Range("E12000").End(xlUp).Row To 1 Step -1
If Range("E" & MY_ROWS).Value UserForm1.ComboBox1.Value Then
Range("A" & MY_ROWS & ":E" & MY_ROWS).Delete (xlUp)
End If
Next MY_ROWS
Also anyone know how to add another condition to make the macro stop the delete process at lets say Range("a1:e8")?
View 9 Replies
View Related
