I have a spreadsheet with multiple sheets, which can vary from project to
project, and they all have the same center sections of the headers. Is there
any way to automate the filling in of all these headers based on the first
sheet?
I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies View RelatedI have a list of cities, counties, and schools with dates for each account. I want to put these into a workbook with tabs along the bottom for each one, then I want to be able to select all of the accounts that have a Jan 1st effective date and show them on a list in the first worksheet.
View 9 Replies View RelatedFrom a master (data entry) spreadsheet of work projects, I'd like to automatically create a tab for each individual contributor that lists all projects they are involved with. The thing is that being a contributor can mean being the lead, assisting with, or being the technician on the project (all columns in the master). To make the individual tabs easier to read, it'd be great to have that tab's contributor name in red, wherever it happens to fall in the various columns.
I've created an example that's a little simpler than reality - in real life there would be 20 tabs for the individual contributors and instead of 3 "Assist" columns there would be 20 columns.
Can you passwrod protect a tab or a range of cells within a spreadsheet
View 9 Replies View RelatedI am interested in printing an entire workbook in one shot with multiple tabs, where each tab is one page. I would like to print the tabs such that the first tab has the number '1' in the footer, the second tab has '2' etc. And I don't want to go into each tab and type the number in the footer.
Does anyone know how to easily make this happen?
I have attached an extract from a Conveyor drum design document.
Cell E7 contains a relatively simple formula to extract data from the supplied table. I have tried time and again to make this work, but the best i can come up with is the formula shown, which returns an incorrect value.
I would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies View RelatedI need to create multiple workbooks from a template, but the header on the sheets need to change based on a list of numbers. I know you can generate multiple sheets from a template within the same workbook. Can you export all the sheets once they are generated to separate workbooks/files? Also I need to change the text in lets say cell A1 on every sheet based on a list from the main sheet. So the main sheet has a list in column A: 1, 2, 3, 4 etc. Once the sheets are generated from the template cell A1 on each generated sheet needs to have a different number from the list i.e. 1, 2, 3, 4 etc. It would be nice if i can set the format of cell A1 on the generated sheets so when then number is inserted it large text and bold.
View 4 Replies View RelatedI'm currently faced with a spreadsheet that has data formatted like this:
A
1 RandomRowofData1
2 RandomRowofData2
3 RandomRowofData3
4 RandomRowofData4
5 RandomRowofData5
6 RandomRowofData6
7 RandomRowofData7
8 RandomRowofData8
9 RandomRowofData9
Every 9 rows, a new "set" of data repeats itself (wow, this is so hard to put into words)....
I need to figure out a way to get the data in column "A", every 9 rows, to transpose itself into 9 separate columns.
I am trying to go through each worksheet and if the worksheet name is Hematology then the header columns will be put into the listbox (ListBox1). The first row of the header is the parameter and the second is the units. Ideally I'd like column 1 to have the first headr row and column 2 to have the second header row. Once the listbox is completed, the user can select multiple columns by the header and those columns will be deleted. I have the ListStyle set to 1-fmListStyleOption and MultiSelect set to 1-fmMultiSelectMulti
The only thing I get when I run the rubroutine is a userform (Hematology), an empty listbox (ListBox1) and my two command buttons (Nothing to Delete and Remove Parameters).
Private Sub Hematology_initialize()
Dim Wrkst As Worksheet
Dim Header1 As Range
HeaderRange1 As String
For Each Wrkst In Worksheets
If Wrkst.Name = "Hematology" Then
For i = 1 To Wrkst.ColumnCount
Set Header1 = Wrkst.Cells(5, i)
HeaderRange1 = Header1.Address & ":" & Header1.Offset(1, LastColumn).Address
With Hematology.ListBox1
'Clear old ListBox RowSource
.RowSource = vbNullString
'Parse new one
.RowSource = HeaderRange
End With
Next i
End If
Next Wrkst
End Sub
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
View 5 Replies View RelatedIs it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies View RelatedExcel 2007
My workbook contains 13 tabs - 1,2,3,...12, and Summary
My data starts on line 4 of every sheet but varies in length - so far the longest goes to line 30.
Rows used on all 13 sheet are as follows:
A - contains facility names
B - contains a two or three letter code
C - contains hours
D - contains dollars
E - contains adjusted rate
On the Summary tab I have listed all the facilites and two or three letter codes. I need to sum column "C" on tabs 1-12 when they match columns A & B on the summary tab. I have tried the following but can't get them to work:
=IF($A5=""," ",SUMPRODUCT(--('1:[12]12'!A$4:$A$50=$A5),--('1:[12]12'!B$4:$B$50=$B5),'1:12'!D$4:$D$50))
I did not put the [12] excel added that automatically I had 1:12
=SUMPRODUCT(--(THREED('1:12'!$A$4:$A$50)=A10)*(THREED('1:12'!$B$4:$B$50)=B10),(THREED('1:12'!C4:C50)))
I just seen the THREED for the first time today and am not sure if this was the correct place to try but it didn't work anyway
I have 3 sheets in the same workbook that I want to print in 1 PDF report, is there a way that I can do this?
View 2 Replies View RelatedI have an Excel file with 70+ tabs and was wondering if there was some way to group them together, short of just making separate worksheets.
View 6 Replies View RelatedI am looking for a macro or a formula that can give me multiple tabs, what i need is jan 01 to april 30,the next 2 books i could do by copying of course i have looked at the macros on here and no nothing about them ....
View 14 Replies View RelatedI would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub
How can I sumif over multiple tabs?? Without using sumif(a:a,sheet1!a1,c:c)+sumif(a:a,sheet2!a1,c:c)
Like sumif(sheet1:sheet2!a:a,a1,sheet1:sheet2!c:c) I do not want to use a macro. I have about 80 sheets.
Sheet1
Apples 93
Pears 49
Oranges 20
Bananas 35
Sheet2
Apples 100
Pears 13
Oranges 2
Bananas 350
How can I do
=AVERAGEIF(AZ6:AZ1721,">0",AZ6:AZ1721)
But across 18 tabs all with the same ranges???
I trying to use the formula below to add values across multiple tabs but I am getting a value error. I think it is just a small punctuation thing.
=SUM(INDIRECT("'"&REF!$A$2:$A$3&"'!&$F$62"))
REF is the name of my references tab and has a list of the tab names
I have one tab for every month of the year plus a pivot table and summary page. Each month has 100+ products produced. In any given month the products could change, so a product could be on multiple sheets. I have used the pivot table to eliminate duplicates and create my summary sheet. Now I am trying to lookup the product description across the tabs using and if(isna(vlookup, but this does not seem to be able to handle more than a few tabs at once.
The second problem is I need to add the the production from each month for all the products produced in a year to the summary tab. I do not think the sumif function works here (or I am doing it wrong). I thought about an if(isna(vlookup +if(isna(vlookup and so on but do not think that will work either.
Could you help with an onerous task that I must complete every Quarter.
I have a spreadsheet with multiple tabs.
The first 3 Tabs are Calculation sheets and do not need to be re-named.
All the preceeding sheets each need to be renamed to the days of the month (British Format), skiping Sundays.
i.e Tab 4 should be renamed 010409, Tab 5 should be renamed 020409, Tab 6 should be renamed 030409, Tab 7 should be renamed 040409, Tab 8 should be renamed 060409 and Tab 9 should be renamed 070409 etc etc ...
Extra - Also if possible on each sheet could the Tab date be placed into Cell A4 (eg. 010409) and also the Day number (eg. 01) (Starting from 01 on 010409, 02 on 020409, 03 on 030409, 04 on 040409, 05 on 060409, 06 on 070409 etc etc ...) into Cell A6.
I am using this for my sheet =VLOOKUP(B1,master!$A$1:$C$45870,2,0)
I have added a tab "masterA" with 47K lines and a tab "masterB" with 38k lines.
How do I get excell to start with master--if it does not find it there - go to masterA --and if needed go to masterB? ( checking in that order )
I have imported a table from my access database. sadly, it has over 65536 rows. I am going to have to break table down into mulitiple sheets on excel. Using a VLOOKUP formula normaly like this. =VLOOKUP(E5,MHIFUPK,5,0)
where E5 is my target,MHIFUPK is the sheet with the table array, and 5 is the price of E5. Now I will have multipe sheets, and I need to be able to refreance all of them in order to find E5. Anyway to do this besides upgrading to 2007, (wish I could get the company to upgrade)
get the code for sending multiple emails as per the spreadsheet list. Assume the spreadsheet has 100 line items and each columns specifies the name of the person, value, recipient email address ("To" and "CC") and sender name.
And the Body of text is :
Hi "Name of the person" Please find the value of "Value" to be paid for the moth of xxx and kindly let me know for further clarification.
I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False
We have these worksheets that have 100 tabs each
each tab is named joel_1400, joel_1401...Joel_1499 insert data in each tab template as needed for RFI's. then we have to make another worksheet with 100 tabs for 1500 to 1599
what we are doing is copying the whole worksheet and then erasing all of the user fields and changing all of the names manually for each tab
I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
View 6 Replies View Related