I have the regular headers in the first row, followed by rows containing my data. And at x number of rows, a new row containing headers appear again, followed by rows containing data. This goes on for the rest of report. What I need to do is remove the rest of the headers and lines because I only need to have one header in the first row.
Note that the header takes up two rows (one for the actual headers and one for the ====== lines. So removing the repeated headers is removing 2 rows.
For eg, part of the report looks like this:
PRODUCT PRODUCT NAME ==============================================12342EXAMPLE PRODUCT 122525EXAMPLE PRODUCT 2 35476EXAMPLE PRODUCT 3 53467EXAMPLE PRODUCT 4
PRODUCT PRODUCT NAME ==============================================135892EXAMPLE PRODUCT 5
I have a userform with two listboxes in them, i have set the columns in the listbox to 9 and would like to populate the column headers in the listboxes with the column header of one of the sheets.
I have two sheets, where I am trying to look up the value from one sheet and post it to the other.
On sheet 1 I have the Names of the Individuals, On sheet 2 I have the Names of the individuals in a different order and then in the next column i have the amount of dollars they spent on a product.
The reason I don't think I can do a simple vlookup here is that sometimes the names are listed Multiple times each because they made seperate purchases.
So for example
Sheet 1 SHeet 2 John Doe Jane Doe $1,000 John Doe Michael Jordan $2,000 Jane Doe John Doe $3,000 Michael Jordan Michael Jackson $4,000 Michael Jackson John Doe $5,000
If I did a vlookup, I assume that John Doe would return $3,000 for both. I would like to return $3,000 for one and $5,000 for another.
I am trying to solve a column total where rows that have a repeated column A value only have their column B value totaled once.
For example the table:
A B item1 20 item1 20 item2 50 item3 30
The total I am looking for column B is 100 (20+50+30) and not 120, as item1 should only be added once.
I made a few forum searches I made and did not find my answer, though I suspect this is a repeat question. I am guessing there may be a sumif(frequency solution out there that I'm just not hip to yet.
I have some textboxes named value1 through to value10, and have got consistent, sequential coding in the change event of each box to perform some actions (enable some other textboxes.)
I was wondering if there was a way to tidy my coding so that I do not have 10 change events that are essentiallly the same except for their sequential numbering. This may be impossible, as I think I have to have a macro for each change event, but thought I ask just in case there is a way.
Private Sub value1_change() If value1 "" Then markup1.Enabled = True Quote1.Enabled = True Else markup1.Value = "" Quote1.Value = "" markup1.Enabled = False Quote1.Enabled = False End If.......................
In the attached file column A has ID's. In the attached example i have used 2 ID's 141020061 & 151020062. I need to find the last entry of each ID and sum the value from the column F. that is the last entry for the ID 141020061 is 40500 and for 151020062 is 0 so the total should be 40500.
I have a table with some reapeated words in, I wondered if anyone had any methods of counting words and displaying the total in number format. for example if I had in cell A1-Hello and A2-Hello and A3-Bye how can I get Hello = 2 and Bye =1
I have a list of products more than 5000 positions (rows) Some positions are repeated (It could be 1000 rows with "Pen" position)
Based on this I need to create new short list which will contain the list of ONLY UNIQUE positions.
The same function is: DATA - FILTER - ADVANCED FILTER - UNIQUE RECORD ONLY It is only filter, but i need the same functionality for new short unique list
I have 1-d array that gets populated from a number of sheets. This array may contain duplicate entries... for example, let's say this array contains animals.. cows, chickens, horses, pigs... etc. What I would like to do is take this info from this array and create another where it would contain all the different types of animals but without all the repeats.
I have a sheet "Pattern" with a series of statements in column A, starting at row 12. These contain a lot of common words like 'a', 'and', 'that' etc which I would like to automatically remove. On a separate sheet 'Library' in column D I have a list of these common words which I would like to look through one by one and remove from the statements on the 'Pattern' sheet.
The code I have at the moment looks like,
Sub CommonWords()
For i = 3 To 65536 Dim w3 As String w3 = Sheets("Library").Cells(i, 4).Value Sheets("Pattern").Range("A12:A65536").Select Selection.Replace What:=w3, Replacement:="", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False Next i
End Sub
But this only achieves to remove the contents of the 'Pattern' sheet, column A..?? Where am I going wrong? Also, with this method if I find and replace 'a' with the 'LookAt:=xlPart' option, is this going to remove all 'a' 's, even if they are in the middle of a word?
I have a spreadsheet (>10,000 rows) with data referring to a grid cell map. Each grid cell on the map has an ID and associated data. About 10% of the grid cells have duplicate records, but with different data. I need to produce a spreadsheet with a single record for each grid cell that contains the data from each of the duplicate grid cells. Some occurrences may be >2. Example below.
What I’ve done is mix up set of results to give me every combination of 8 sets of 3 (6500 combinations), when I summed every row (combination), and sorted then numerically it looks like I have some combinations that are exactly the same.
I just joined this message board after having very little success in altering my VBA code. I have a data file and when I run the VBA code, it only works partly. Currently when I run the code, it will create new month headers, but only for a 12 month period and it is based off the current date on the computer. I need this to go to whatever specified date range I choose and I especially need it to go for more than 12 months. I am also having some issues because when my code runs, it is not running back far enough and there are gaps in the analysis that it does. For instance, after changing the time on my computer to 2009, project A and B's data stops in June 2009, even though the define phase is occuring before that. I have attached the code.
I am having an issue with Headers across a workbook. I have a workbook that I have set all of the headers so they are consistant across all sheets however when I move a sheet from another workbook I am unble to apply the header to this new sheet. I have tried selecting all the tabs and the going into Page Layout- Page Setup-Headers and selecting OK to apply to all the sheets but this does not work. I am having to delete the headers and redo them each time.
function where in if i pass header name and row number to the function it should search for the header name and return a boolean value back to the main function which returns 1 on finding a header and 0 if it dose not find a header.
In the attached file is it possible to use cell/ array formula in cells P3 to R6 to lookup names (Column O) within the data range (Columns A - M) and return the values shown in the yellow shaded area?
I am trying to write some code that will look in an excel cell find if it contains the word that I am looking for and make it bold. I have written the following code so far
VB: With Worksheets("Label Print").Cells(i, J) .Characters(Start:=InStr(.Value, "Name"), Length:=Len("Name")).Font.Bold = True End With [COLOR=#3E3E3E][B][/B][/COLOR]
The issue is that if "Name" occurs twice (or more) in a cell it will highlight only the first.
I have a number and i wanted to convert it to a number or character.
Ex.
if i have value of 7, should be converted to a character of "*", the output will be 7 times of "*" (*******) if value is 10, so it will be 10 times "*". (**********)
I create a monthly excel sheet regarding customer & their payment like this.. Suppose..
Month January 2007 Customer A 2000 Customer B 2000 Cust C 3000
Feb
Cust D 3000 Cust E 4000 Cust A 2000
Mar
Cust B 2000 Cust A 2000 Cust G 4000
Now, I want to do somthing like that If a customers Name repeat in another month, I mean Cust. A name has been already entered in Month January & if it comes again in february then it should be automatically replaced or highlight with red line Or something like that.
how do i copy one column to another one (with formula) that not repeat any number?
i have a list of prices and i need that list in other column with any price repeated.... and theses prices are imported data, so they change, thats way need to be formula =/
"A" is item number: "B" is sales Date: "C" is sales price.
What I would like to do is search column A and when there are two of the same item numbers know what date they sold and for what price. I would prefer to build another table that has only this data.
