In cell G2 I have a formula that adds the values in column C that are labelled in column B as either 'Apple' or 'Grape'. This is accomplished in the formula using {'Apple', Grape"}. Is it possible to change the formula so that the {'Apple', Grape"} can be replaced with a reference to a range in which the names to be used in the formula will be listed (for example in J1:J3 in the attached file)?
Book6.xlsx‎
I have an email hyperlink setup on my excel sheet and I would like to automatically (not manually) add a sentence that is another cell (that changes from time to time) to the subject line or the body of the email.
View 1 Replies View Relatedas per the attached, need to insert those grey rows subject to the following condition :
if current row date <> next row date, .and. current row latitude / longitude <> next row latitude / longitude , insert grey row with date = current row date, else insert grey row next row date
note that the coordinates in the repeated grey rows, for the "Home" location, are the same through the sheet, should be entered by the user, at the beginning of the process, since there will be a spreasheet per user.
date is in column K
latitude / longitude are in columns B / C
this will be of tremendous assistance in automating mileage claim review.
I am doing a financial analysis for a hospital. I want to know how to add something to a number based on conditions. Base pay is $300 for the first 10 patients. If more then ten patients >11-20 add 40 dollars per visit if greater than >21 add 50 dollars per patient
View 3 Replies View RelatedI need to add a condition to a statement that adds a "If TRUE" reference to another cell.
The other cell can be either a TEXT value "RM1" OR "TE2". If neither condition is true than the value is blank or zero.
So right now I have in the destination cell =IF(AB7="CONT",V7,"") That works lovely, but really isn't countable unless cell "Z7" ALSO has Either "RM1" OR "TE2".
If cell "Z7" has the text "DEA" or "SP" then the value of "V7" will be placed in a different column. I will use a different destination column (for this modified "DEA" or "SP" condition)
I'm trying to write a formula where I can add the values found in non-sequential cells in a row based on if the value in the previous cell in the same row meets certain criteria.
View 14 Replies View RelatedI work in Local Government and I am recording the contact that we receive for each transaction that are avoidable or unavoidable. This is broken down into service areas.
The data is imported into excel from a database and therefore is constantly growing.
What I want to do it a very basic summary page so that I can group those that are and those that aren't avoidable for each service.
Because the data is ever expanding I would like this on a separate sheet from the actual data.
I attach a sample of the worksheet and would be grateful if someone could advise what formula to use on sheet 2 in cells c4, c5, d4 and d5 to make it do it automatically.
I want to find the first topper student in each subject but the formula is not giving correct output.
View 14 Replies View RelatedI have a column of names. Most of these data show multiple times. Another column has values. I'd like to find the maximum value for each name.
This solution might correspond to "=MAX" the way that "=SUMIF" corresponds to "=SUM".
Note: the table has over sixteen thousand rows; some solutions may work technically but not be practical.
How can I create a macro for excel to delete rows that have the SAME subject? (delete all duplicates - the price etc on that row may differ but as long as the subject is the same, I was to delete it off)
View 4 Replies View RelatedI am using the following code to automatically send an attachment to a specific email with a specific subject line.
ActiveWorkbook.SendMail Recipients:="johndoe@yahoo.com", Subject:="General subject"
ActiveWorkbook.Close SaveChanges:=False
Is there a way to reference a specific field in the active workbook as the subject line?
I've been asked to write a multiple if statement for someone here at work but I've been trying all day with no success. Basically, the OS liabilty in column C cannot exceed £2500. Here is an example inc the expected results............
So in row 1 the expected result is 500, as even though there is a 1000 reserve, 2000 of it has already been paid In row 2 nothing has been paid in column A so the OS liabilty in column C is the reserve up to a max of 2500 In row 3, there is 5000 in reserve, but 100 has been paid so the OS liability in col C must be 2000
In row 4 nothing has been paid in column A so the OS liability is the reserve in column B In row 5 150 has been paid, 150 is in reserve, so 150 is the OS liability
In row 6, 2500 has been paid, but even though there is an amount of 300 in reserve (col B), nothing is expected in OS liability as the 2500 max liability amount has been reached.
I have a spreadsheet where in the past we have used a turnover period (always 12 yrs) as our constant to calculate our average factors. For example we use formulas to calculate up to 12 years and the we just restart at year 13- providing that one of the formulas does not return a 0 value. I need to be able to choose our turnover period- say 8 years and have the values start then but in the next prokect I may need a 10 year turnover.
View 3 Replies View RelatedI would like to select File/Send to/Main Recipient (As Attachment) within my Excel Spreadsheet. Within the email, I would like the subject line to be automatically filled in with an entered value of a cell block from within the spreadsheet.
For Example, If cell block A1 had Thursday entered in the cell. Then once I chose send to/Mail Recipient, The subject line would read Thursday.
A1: John Black B1: Jane Black C1: John Black D1: John Black
A2: 24 B2: 32 C2: 23 D2: 12
If I choose "John Black", I would like a list generated that lists 24, 23, and 12 in row 3, in separate columns, but no empty columns between the numbers.
Please check this sample file. Say for example; I am sending this file via mail to different agencies. See in this file sheet named base & column title Agency , filters concerned agency wise and send via outlook to the concerned agencies mail id from mailinfo sheet. What my concern is since these are different agencies, I wanted to bring the agency name in the mail subject.
Link below:- [URL] ............
I currently have the below in my VBA which adds the text to the subject of an email:
Application.Text(today - 1, "MM-DD-YY")
today = Int(Now()) is part of the macro. How do i format this to display workdays only.
For instance if today is 07/21 (monday) i need this to display 07/18 vs 07/20.
In excel that function would be =WORKDAY(A1,-1) where A1 is =Today(), just not sure how to translate this to VBA.
I have a simple sheet with a list of costs (small version attacheds as there are 430 items on full list) when i enter "Y" in the move to invoice column I would like the description, multiple and cost details copied to invoice sheet. The added complication for me is that if for example when there is a requirement for multiples of that cost to be added to the invoice.
View 9 Replies View Related cannot seem to get a function that works.
I have a sheet named "Master" with student reference numbers (A2), student names (B2/C2) and their four subjects (D2, E2, F2, G2).
I need a separate sheet for each subject, so potentially 30 additional sheets, and i would like for where a subject is mentioned in one of the four columns of the master, the students reference and names would then be copied and pasted into a row on that subject specific sheet. Leaving the subject sheets with a list of names and numbers of the students studying.
So you would have a student on the master sheet and then they would appear on four additional subject sheets.
Ideally it would also update subject sheets as new students are added. And additional information is being added to the subjects sheets so they cannot be cleared.
I would like to create a list covering multiple columns.
I would like to have 5 columns which will contain the same value/ (word).
If I select,that value from the list, I would like to have each row the word is
found be displayed regardless of which row it is found.
I am trying to send out an e-mail from excel with all kinds of combined info. Here is what I have so far, which works to send out an e-mail to a certain address with a compiled subject. No luck with inserting the BODY of the e-mail yet from a certain cell.
=HYPERLINK(CONCATENATE("mailto:",E32,"?subject=",F32))
Also, How do I make the text in each of these cells read "send e-mail" rather than the whole jumbled mess that is currently in there from the combination of the cells?
editing a datafile. I have a spreadsheet (Sheet2) that looks like this (Start Date is entered in J2 in Sheet 1 and End Date in J3 in Sheet1):
Date & TimePatient IDResultLevel
13/02/2014 14:1818.5>=4 AND <=15
13/02/2014 14:1027.8>=4 AND <=15
13/02/2014 02:231122.5>20
13/02/2014 06:191116>15 AND <=20
13/02/2014 10:081110.2>=4 AND <=15
13/02/2014 14:111113.4>=4 AND <=15
13/02/2014 17:541112.9>=4 AND <=15
[code]....
I need to find the maximum and minimum value for each subject. If the min>4 and max<10 and the subject does not have a value on either the last date (J3 in Sheet 1) or the date before that (J2 in Sheet 1 - 1), I need all of their data removed from the spreadsheet.
I have tried a number of things, but have not been able to figure it out. It may not be available with this particular code, but I am not sure what limitations this code has. Does anyone know how to include the contents of a particular cell in the subject line? Currently the subject line says "Notification." What I am looking for is for the subject to say "Notification - John Doe" where John Doe would be the contents of cell D13.
View 2 Replies View RelatedI use gmail, and have an excel sheet with hundreds of rows. I need to send each recepient an e-mail using their e-mail address (row D), and their name in the body and subject (row A). The rest of the body of the email will all be the same.
View 6 Replies View RelatedI receive around 40 emails per day, all in the following format:
Subject: "Team x.x - date"
Body text: "x files sent"
where x represents a number.
What I'm hoping to be able to do is drop all these emails into a folder (in .msg format), and use excel to look through them and extract the team number from the subject, and the number of files sent from the body text for each message.
Unfortunately, while I class myself as reasonably competent with excel vba, working with emails or .msg files is new to me, so I genuinely haven't a clue how to do this, or if it's even possible.
I have a form which is going to be used as an aid to staff, I have created Macro's that when clicked enter information in to fields in the worksheet, I would also like the macro to generate an email with a specified Subject and body filled out. At the moment all I have achieved is to generate an email through File - Send to - Mail recipient.
I have also tried to have an email created through Outlook using MAPI, but once again have been unable to create an email with or without a subject and message body. Below is how far I have got in creating an email using MAPI.
This is part of Macro to insert information Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet1").Select
Range("E12").Select
ActiveSheet.Paste
Call SendAMessage
End Sub......................
Is there anyway this can be done using a button in the spreadsheet?
For Example.
I send numerous almost identical forms to a colleague and to eliminate subject line typo's (Reference numbers) i would like the Subject line to match a cell in the document itself.
I have experience in working with Excel, but none on using code/macros
I did this 10 years ago so I admit I am rusty at this but here are what I had in my notes that worked with Excel XP. I am currently using Excel 2010
With ThisWorkbook
.HasRoutingSlip = True
With .RoutingSlip
[Code]....
The last line will send the workbook but I need a Subject and Message to go with it.
When I delete a worksheet, via code, a warning pops up telling the user that a data is subject to deletion.
View 9 Replies View RelatedI need to take contents of cells (which are results of formulas and references to other cells) and use the contents to compose an email.
Here are some cells to illustrate. NOTE: the information in brackets is the formula that's contained in the cell, while the text is the result of the formula.
B3 = This is the link used to compose an email.
C19 = abc@domain.com (an email address)
C22 = Login expired on node citrix08. [=concatenate("Login expired on node ",C7,".")]
C25 = Dear Company A, [=concatenate("Dear ",C6,",")]
C27 = The login for citrix08 has expired. [=concatenate("The login for ",C7," has expired.")
C29 = Contact us within 15 days to continue. [=concatenate("Contact us within ",C9," days ...]
C31 = Ticket 444 has been created to track the issue. [=concatenate("Ticket ",C10," has...]
C33 = Lots of other text
D33 = More text
E33 = More text
C48 = Sincerely,
B3 (Named "SEND MAIL") contains the formula used to compose the email from the cells above, however, I cannot add all the cells to the formula without an error. At some point, there is too much data (contained in the referenced cells) and B3 returns #VALUE error.
=HYPERLINK("mailto:" & C19 &"?subject=" & C22 & "&body=" & C25 & "%0D%0A" & "%0D%0A" & C27 & "%0D%0A" & "%0D%0A" & "%0D%0A", "SEND MAIL")
The above formula works now, because it doesn't contain all of the body (of email) I need.
When I click on B3, it properly launches the email client, puts in an address, subject, and two lines of text in the body.
My workaround to this problem is to manually highlight cells C29 through E48, select copy, then go to the partially formed email and paste the rest of the body.
Is there a way to include all the body into an email? I think this can be accomplished with a VBA code, but have no idea how to do it.
I dont want to send the mail, just compose it using cells that have calculated what is needed in the body. I can then read the email, confirm it's content, and click send in the email client manually.
Does anyone have any suggestions? Is there a better (but simple) approach?
I know this could be done via javascript on an html page, but I dont know how to code this at all.
I do know excell quite well and have many cells to calculate what is needed in the body of the email, but, alas,
still can't compose the ENTIRE email from the formula in B3.