The cells A2:A25 are merged in my excel sheet and I would like to create subsequent merged cells below the A2:A25 set; however, I would like the user to determine the number of merged cell boxes.
The code I have written is as follows:
Dim lr As Long
lr = Application.InputBox("How many days was the monitor deployed?", Type:=2)
If lr = 0 Then Exit Sub Else lr = lr
Range("A2:A25").Select
Selection.AutoFill Destination:=Range("A2:A" & lr * 24), Type:=xlFillDefault
Range("A2:A" & lr * 24).Select
End Sub
So I am creating a macro where the user opens a message box and types in a value representing the number of days. That value is then calculated into an autofill equation but I keep getting an error.
I have the following code that was achieved using the macro recorder. The only problem I am running into is that during the autofill command, there are never the same amount of rows to autofill. It could be as few as 5 rows and as many as there are rows on the spreadsheet. When I recorded the macro there were 953 lines, and unfortunately I cannot figure out how to change the specific destination of 953 to a variable destination determined by when data ends. Here is the code I currently have:
I have worksheets that refernce values in one column off columns in others and do this on daily basis. each day there are blank amounts in random fields which I inturn use a macro to delete rows with blank amounts
I then want to autofill the numbers from 0001 to the bottem line of the sheet where the word "END" always is, as the position of the end word is random each time and autofill always needs a definite range how do I get my macro to autofill down to the word "end" ?
here is the code that doesnt work for me and I've been trying to fix
Sub Macro1() For counter = 1 To 30 Set curCell = Worksheets("Sheet1").Cells(counter, 6) If curCell.Text = "END" Then Range(Cells(1, 6), Cells(counter-1, 6)). _ Selection.DataSeries Rowcol:=xlColumns, Type:=xlAutoFill, Date:=xlDay, _ Trend:=False Next counter End Sub
I am creating a loop that will autofill 16 cells down. It copies the formula from one cell (Z230), pastes that 16 cells down (cell Z246), then changes the lock properties of the cell (Z246) before autofilling down 16 (to cell Z261). At which point the loop starts over again. (copies cell Z246,pastes it to Z262, fills down 16 , etc)
Because the cell I am copying from changes in each loop, I set a variable to grab the address of the starting cell and last cell of the copy.
I then put this into a String so it would return something like this
Range("Z245:Z259")
Problem is I get extra quotes around Range("Z245:Z259") - it comes out as string "Range("Z245:Z259")" This gives me a problem when I try to replace
What I need to be able to achieve is a function in my macro that will
a: Count the number of rows in the active sheet b: Allow me to use this info in other functions, such as subtotals, autofills
After searching many sites I'm pretty certain the function I need to use is "rowcount".
I've managed to incorporate a loop using this function, which is fine when running the macro but not so good when you are stepping through 5000+ rows
RowCount = ActiveSheet.UsedRange.Rows.Count For x = 2 To RowCount Cells(x, 42).Select ActiveSheet.Paste Next x
So for me now it seems as though "x" should represent the number of row that has been counted in the above code. But when I try to use "x" in functions the macro falls over
need to autofill collum C with a formula related do collum B. If I do this by hand I just type the formula in C 1, and click on the right-down corner of the cell selection, and the formula goes until the last line (last value on collum B). But I want to create a macro to this function, and the problem is that the files that I will apply the macro have different lengths. I want to modify the macro to be able to run from C1 until the end of the values on collum B. I don't want to freeze the last value.
In other files C4819 will not be the last value, could be 5345 for example, but its impossible to do this, my macro should do: "autofill collum C with a formula until the last value on collum B"
Just a niggling problem, I've got lstRow as a Long and it contains the value of the last row offset by (1, 0). The problem is i'm trying to add it into a range
Like that.. Except i've tried a million different combinations of " and & in different places to try and get it to compile. It refuses too. It always gives the error "Expected list seperator or )" I know I could just do it individually from C to K but I'd like to learn how to do it this way as well.
I'll do what I can to explain this mess I want to clear up...I have a series of excel reports I have to download and work thru daily and I need to see if there is a code to autofill down thru a column, based on multiple statements throughout the column..here goes:
Regardless of the actual f cell, I always will need to fill the Blank ** cell w/ the values from the previous cell....Hope this makes sense...& thanks in advance.... have_a_cup@cox.net
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
Due DateInvDocument numberDebitCreditBalance 17/09/08L01607610714211201825.44 13/10/08L01637010284345841020 13/10/08L01637131713874501020 13/10/08L016373852202473461020 13/10/08L0163748.5222E+111020 15/10/08L01641811103746832316
The above is a part of a w/sheet. Rather than determining the last row in the debit column and credit column (to know which is greater) and use a loop to put a formula in each of the cells in the balance column (adding the debit and credit), I know I can use the with ... statement to input the formula at a go , but cannot figure it out.
Sub sumtotal() With Sheets(1) With .Range("G14", Range("G" & Rows.Count).End(xlUp)) .Clear .Formula = "=sum(E14+F14)" On Error Resume Next
I have few range of data that may range from 0 to 24 and the return to "0 " after 24 and the 2nd set of value keep repeating 0 to 24, but I would like to keep adding 24 when the value return to 0 and if the number less than 5 will be adding 24 and the number from 6 to 8 will be equal to 11 and also the number from 9 to 23 will not change. I have attached an example that Colum A needed to be converted to column B (which I done it manually).
I'm trying to create a sum that gives the output with the currency format but also change column D from from D2 to the Total the currency format. (it changes based on how many customers). Here is the code
Code:
Windows("Test1.xls").Activate Dim rng As Range Set rng = Sheets("Sheet1").Range("D65536").End(xlUp).Offset(1, 0) Range("D" & lastrow + 4).Select lastrow = Cells(Rows.Count, 1).End(xlUp).Row Cells(lastrow + 1, 4).Formula = "=sum(D2:D" & lastrow & ")" rng.Select ("D" & lastrow) Selection.NumberFormat = "$#,##0.00"
I know it has to do with the rng.select statement but I'm just not sure how to make it work for all of Column D from D2 to the Total/Sum.
I have data from 100 trials. Each trial has a variable number of data points (rows), but each row is labeled in the first column with the trial number. I would like a macro to identify the first row of each trial, calculate the difference of the value of the cell in column G of that row from a constant (718), and then add that difference to that cell and all other cells in that column of that trial.
So based on the attached sample, I would like all values in column G for trial 2 to be +1, for trial 3 to be -5, and for trial 4 to be +2.
In the file, I've cleared all the data from the impertinent columns. Eventually, I will also want to perform a similar process on column H but with a different constant.
Hi, looking for help desperately in fine tuning a formula. I have a formula at the moment (which works) for searching through a list on a separate file and totalling up all values which relate to it, see below:
The tab ‘1’ in the formula relates to the first of the month so this month there are 28 different tabs with similar information.
With C10 containing the date in this instance, does anybody know a way of making ‘1’ a variable so that entering ‘04/02/10’ would change it automatically into a 4? (Unfortunately for me changing the 1 to =c10 didn’t work).
I've got a problem involving several Dim'd Variables needing to be added up, they're all Dim'd as Variants though as they can be either strings or numbers at any time.
I need a formula (VBA) to add them up (to add their actual numeric values - not just a "1" if they contain a number) and ignore them all together if they contain string values.
I have a userform that I'm using to add data to a worksheet, with the following
Private Sub CommandButton1_Click() Dim OutSH As Worksheet Set OutSH = Sheets("Sheet1")
OutSH.Cells(nextrow2, 1).Value = Surname.Value OutSH.cells(nextrow2,2).value = ID.value OutSH.cells(nextrow2,3).value = Date.value ...... I need to ensure that duplicate entries are not made for the same person on the same date. The ID is unique to each person.
IF statement that can check for a duplicate and then come up with a dialouge box with some custom text, and then exiting the sub?
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test() Dim StartRng As Range Dim Buffer As Range
I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?
The range column is "E4:E" Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro. But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile. Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile. The next target file in the folder is opened and the actions are repeated in this second target file. For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook. The error message i get is: "Run-time error 91:Object variable or with block variable not set." When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V 13019090W Part A1 68705500 Part B1 64202900 Part C-11 59634600 Part D1 26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code: Sub dataintoonesheet()
Dim i As Integer Dim jk As Integer Dim j As Integer
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select Selection.AutoFilter Field:=1, Criteria1:="1" 'SET RANGE Dim sFormula1 As String Dim sFormula2 As String Dim sCell1 As String Dim sCell2 As String Dim sSheet1 As String Dim sSheet2 As String Dim r As Range Dim MyRange As Range 'for testing
With Sheets("Points") sFormula1 = .Range("CY1").Formula sFormula2 = .Range("CY2").Formula End With
'FORMULA IN R1C1 STYLE strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))" 'ENTER FORMULA IN ALL CELL RANGES r.FormulaR1C1 = strFormula 'REDUCE TO VALUES Dim ar As Range 'an area is a range For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells ar.Value = ar.Value Next ar
I need my program to: - find the cell containing the string "Datum/Tid" - record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range Dim lRow As Long Dim lCol As Long
'Find method of VBA Set rFoundCell = Range("A1") Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String Dim stopDate As String Dim startRow As Integer Dim stopRow As Integer startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)") If startDate = "" Then End stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)") If stopDate = "" Then End startDate = Format(startDate, "dd/mm/yyyy") stopDate = Format(stopDate, "dd/mm/yyyy") startRow = Worksheets("sheet1").Columns("A").Find(startDate, _ LookIn:=xlValues, lookat:=xlWhole).Row stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _ LookIn:=xlValues, lookat:=xlWhole).Row Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
