I've done this before but can't remember how I did it:
1BCDEFGH21234533red92701131096601005096604green20070582305250044940472805
blue0355203912033930389706bpink51059230632205352061280789-In column H,
I want to sum only rows that are less than or equal to cell H2.....
Please refer to attached Sinking Fund worksheet. have managed to solve most of it. Just need to figure out how to match the periods out. My requirements are on the worksheet.
1. To get the schedule on sheet 1 to stop calculating further once it has reached the actual number of payment periods as shown in H12.
2. To get the interest calculation in sheet2 to stop once the actual number of payment periods as shown in sheet1 H12 is reached.
I want to group data (rows) using month and year in date column using macro.
For example.
Date ID Amount
01/01/2013 12345 $100
02/01/2013 13452 $73
03/01/2013 12232 $50
04/01/2013 34232 $125
01/02/2013 12322 $67
02/02/2013 12345 $100
03/02/2013 13452 $73
04/02/2013 12232 $50
05/02/2013 34232 $125
01/03/2013 12345 $100
02/03/2013 13452 $73
03/03/2013 12232 $50
04/03/2013 34232 $125
I want to group rows by mm/yyyy in date column. Also I want sum amount column by month.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I have rows of data in excel that update automatically and i want to check in column B how many times there are simultaneous occurrences of a cell value and then if those occurences have been there for a time specified time duration using column C which has a time and date stamp. The time and date stamp is when the price is saved down.
A Simplified Example:
Item
Action
Date & Time
Red
Buy
09/05/2014 09:00
[Code] .....
What I would like the formula to is to count the occurrences of cell B that have been avilable for longer than say 30 minutes.
Formula that worked out the occurrences of cell B with this formula
=SUM(IF(FREQUENCY(IF($B$2:$B$7="Buy",ROW(B2:B7)-ROW(B2)+1),IF($B$2:$B$7<>"Buy",ROW(B2:B7)-ROW(B2)+1)),1))
So if i wanted to count the simultaneous occurrences of "Buy" then the formula would result 1 and the same for sell if i changed the formula would be 2.
Now i want to try and get a way of using the time those occurrences were available for by using Column C
The simultaneous "Buy" was available from 09/05/2014 09:00 to 09/05/2014 11:01 which is longer than 30 minutes so i want to count that as a occurrence.
Then both the "Sell" were only available for 14 minutes the first time and then only for 20 minutes the second time so none of those would count.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedColumnA in my data base contains dates. How can I delete the entire row if the date is before today's date and add a new date at the end of the range to replace the deleted row.
i have the following table of information
Year DOB
7 01.09.96 -31.08.97
8 01.09.95 -31.08.96
9 01.09.94 -31.08.95
10 01.09.93 -31.08.94
11 01.09.92 -31.08.93
and a list of dates i need to look up the date to see which year it falls in and return the year
DATE function won't return TODAY()'s year in the "year" slot.
Is there a way convert, for example, 2/8/1963 to 2/8/2009 without using Concatenate?
i have a dataset which is like a timeseries with 3 columns
first is year second month third values
so lets say like this
year month day value
2004 12 29 100
2004 12 30 200
2004 12 31 300
2005 01 01 50
2005 01 02 60
.....
I need to calculate the quartiles with the condition of the year or the month or even both... I suppose i need something like an array but i couldnt make it work untill now.
I have a formula =if(AA2="","",edate(AA2,12)) which is working well for the Year
This is a delivery run thats requires that the pick up will aways be on a Monday.
I would like the exact day for the following years.
e.g.
Monday 2009 is the 9th March
Monday 2010 is the 8th March
Monday 2011 is the 8th March
Monday 2012 is the 6th March
Monday 2013 is the 4th March
I would appreciate it if it is possible or a alternative way of doing it.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedI have a sheet in my workbook with at least 180 small tables, there may be more.
I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.
For example:
If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.
There are two columns in an excel sheet, one is date of birth and other is date of reteirment
looks somewhat like this:
D_O_B D_O_R
5-Mar-53 31-Mar-11
30-Jun-57 30-Jun-15
20-Jun-51 30-Jun-09
2-Feb-55 28-Feb-13
2-Jul-51
13-Oct-55
1-Sep-51
7-Jul-54
14-Mar-53
3-Aug-50 3 0-Sep-13
Some of the dates in D_O_R are missing. I need to fill in up all the dates in D_O_R column.
D_O_R is = 58years+D_O_B(NOTE the dates should come as last date of the month)
I have the following which works just fine
=SUMPRODUCT(--(Table_owssvr[Migration Slot]>= (ActualMigrations!D$3-6)),--(Table_owssvr[Migration Slot]<= ActualMigrations!D$3),
--(Table_owssvr[Department]= $A6))
If I then add a condition ie
=SUMPRODUCT(--(Table_owssvr[Migration Slot]>= (ActualMigrations!D$3-6)),--(Table_owssvr[Migration Slot]<= ActualMigrations!D$3),
--(Table_owssvr[Department]= $A6), --(Table_owssvr[Is_Migrated]="TRUE"))
It returns nothing even though the Is_Migrated is TRUE
I'm currently using the following function: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000") which works perfectly. However I'd like to add another condition "between 1000 and 2000".
I've tried this but I'm not getting any luck: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],AND("<1000",">2000")).
I have a code that searches in a column for a certain value, if it finds it, it copies this value to a range adjacent to it.
[Code] ..........
However, if the cell where the code is supposed to find a new value is blank it makes the range blank. But in that case, I wan't it to leave the range cells with their original value.
I have this formula in my spreadsheet =IF(ISBLANK(B2), "", C1+1). I need to add a "dash T" to this formula so it shows up in every cell. How and where do i write that into a formula?
View 2 Replies View RelatedSerial No Search E220060926320061125420060612520070824620061026720061226820061127920061226 Excel tables to the web >> Excel Jeanie HTML 4
E - Year Month Date
I need F column as Month Date Year Format
Below is my function.
="Profit $"&SUM(IF(Sold!D15:D8998<>"",IF(MONTH(Sold!D15:D8998)=A4,Sold!H15:H8998)))
I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.
Title: How do I add a condition to an IF and Vlookup Formula:
I need to edit a formula to include a condition. I attached an excel file for ease of explaining the problem. I want to say if $E$5 has “A to B” then F5 will automatically have BOR, but if E5 has anything else then the Vlookup formula applies.
I was thinking something along this formula:
=IF(AND($E$5<>”A to B”,ISBLANK($B5),"",VLOOKUP($B5,'Drop Down'!$D$1:$E$500,2,FALSE)))
I know I need to add “BOR” in the formula above somewhere
Where am I going wrong?
=IF(SUM(Q4)=0,"",MAX(0,G4-MAX(F4,Q4))/7) - to calculate number of days for year
=IF(SUM(TODAY()>G4),(G4-MAX(F4,Q4))/7,SUM(TODAY()-MAX(F4,Q4))/7) - to calculate number of days year to date
I am using this condition to calculate the length of a service which falls with in a specific review period, eg
Service starts 1 Feb 09 and finishes 30 April 09
The review period is 1 Mar 09 and finishes 31 May 09.
I would need to measure the number of days that fall within the review period, which would be 1 Mar 09 - 30 April 09
At the moment I am missing a condition which identifies whether to subtract from 'service end date' or 'review end date'.
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
Adding condition to SUMPRODUCT causes result to go up? (2007). I have the following formula:
View 5 Replies View RelatedI have a spread sheet I use to track tools. One tool may be checked out / returned several times a week. When I do custom sorting I end up with the Tools listed neatly by date and number. EX: ...
View 10 Replies View RelatedI am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
SUMPRODUCT(COUNTIF(N3,"*"&References!$F$2:$F$34&"*"))
I have a forecast monthly trial balance sheet and an Income Statement Analysis sheet. I am analyzing the Year to Date performance for Dec-2013. I need a formula that will match the income statement line i.e revenues, accounting expenses etc. and then sum horizontally from Jan-2013 to Dec 2013 ( if YTD month' Dec-2013' is greater than or equal to date range then sum horizontally the corresponding income statement lines up to the reporting month).
View 2 Replies View RelatedI have a document that I downloaded some data from the Internet "Kronos" and within this data there is a column for date. This column is formatted as Date (01/08/13), but it only displays the date as Sun 1/01. It's missing the year, which it should be 01/01/12. I have tried to use TEXT function to convert it to month name and day name using TEXT(N4, "mmm") and Text(N4,"ddd"), but I still getting Sun 1/01. I have also tried to use Text to columns to split this date but, it does not work. Is there any other way I can convert this date into m/d/yy?
View 2 Replies View Relatedwhat formula could I use when I type in a date another cell rounds up to Jan 1st of the next year? ie 2/1/07 & in another cell it returns 1/1/08.
View 3 Replies View RelatedI am having a problem which I imagine will be fairly simple to resolve but I can't figure it out!
Cell A1 contains a Date eg (01/01/07)
In Cell A2 I want to write a formula that says: Insert 'Warranty' if the system date is within 365 days of the date in Cell A1.