Below is my function.
="Profit $"&SUM(IF(Sold!D15:D8998<>"",IF(MONTH(Sold!D15:D8998)=A4,Sold!H15:H8998)))
I would like to edit this function to also count profit only if Cell A15:A8998 in my Sold sheet has the words "Shipped". The text value Shipped is not a text value I entered, it is automatically written based on a Vlookup formula I created.
There is a function sumif() that is used for do sum() under condition
Nevertheless, if I want to do max() under condition, how can I do?
There isn't a function maxif().
I have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:
View 2 Replies View RelatedHi, looking for help desperately in fine tuning a formula. I have a formula at the moment (which works) for searching through a list on a separate file and totalling up all values which relate to it, see below:
=sumif([filename.xls]1’!$B:$B,D10,’[filename.xls]1’!$H:$H)
The tab ‘1’ in the formula relates to the first of the month so this month there are 28 different tabs with similar information.
With C10 containing the date in this instance, does anybody know a way of making ‘1’ a variable so that entering ‘04/02/10’ would change it automatically into a 4? (Unfortunately for me changing the 1 to =c10 didn’t work).
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI'm trying create a Sum(If formula with 2 conditions, but whatever I try doesn't seem to want to cooperate. I want to add up the sum of all invoices according to the country they deal with and the month that they were created in. I've attached a sample file showing what I'm trying to accomplish. Here is how far I've gotten so far: =SUM(IF(Main!$L:$L;B21*Main!$Z:$Z;C20);Main!$H:$H)
I've tried other forms as well but even though this only returns #Value!, at least the formula is accepted.
Is there any way to use sumif with or , in other words to put more than one condition to execute the sum process
like this way :
+ sumif(search range;condition1;condition2;sumrange)
I tried but I had an error.
When you filter a spreadsheet, you can find results that are similar to a condition. I have families of products that share a common 3 digits, but the rest of the model number is different. The 3 similar digits could be the first 3 digits, or it could be 3 digits starting with the 2nd digit. This spreadsheet has each complete model number on its own row. In that row is a number that represents a volume. I want to be able to sum the volume column if the model number contains the 3 digits.Model Number
Volume
A hat
5
B hat
1
A glove
4
hat
8
In the above example, the total for "hat" = 5 + 1 + 8 = 14
I would type in a condition (family name) into another cell (D1) and the formula in D2.
I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.
However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.
Is there a way to have a sumif formula dependent on two conditions?
View 9 Replies View RelatedI have a problem with a SUMIF statement. I think it is =SUMIF(AND(...
I have attached I want to sum in column E lines 255-316 if in cell D 34 and if cell B25 equals GL and cell C255 equals 0001.
Maybe this would be handled better with a sumproduct formula...
As a starter in VBA i have a lot of doubts... one of them is, how can i sum in a column the cells that are bold? i've thought that sumif was the trick, but i don't find the way to be able to adapt code.
View 2 Replies View RelatedI currently have a Row with this value
row1 lh lh lh
row2 8 12 8 5 2
First I will need to check if the column has an "lh" if true then sum row2, however i will need a second condition that will check that if >8 it will use the value 8 instead of 12.
However if value is<=8 get that value from the cell.
In this case the correct answer is
8 + 8 + 5 = 21
8 (because it is <=8 get the value from the cell) + 8 (because 12 is>8 use the value "8") + 5 (because <=8)
I want use the formula sumif...something like that! =SUMIF(I77:I176;AND(>F1092;<F1091);Q77:Q176). I want sum the values between q77:Q176 if the value in i77:i176 is >F1092 and <F1091 But the multiple criteriun don´t work in the sumif.
View 8 Replies View RelatedI have numbers in cell K1 to K59 with the following formula =SUMIF (A1:A59,"nm",K1:K59). The formula only adds up the numbers from K1:K48.
View 2 Replies View RelatedI am performing a sumif to look to see if a number starts with #, then another to see if the the class is text, both are fine and both return values of 1 if it meets the criteria. My problem is i then need to add a sumif (or something im not quite sure wot) to add the cost if the number begins with a # and the class is text (so baically if both the other sumifs = 1).
View 9 Replies View RelatedI have the following which works just fine
=SUMPRODUCT(--(Table_owssvr[Migration Slot]>= (ActualMigrations!D$3-6)),--(Table_owssvr[Migration Slot]<= ActualMigrations!D$3),
--(Table_owssvr[Department]= $A6))
If I then add a condition ie
=SUMPRODUCT(--(Table_owssvr[Migration Slot]>= (ActualMigrations!D$3-6)),--(Table_owssvr[Migration Slot]<= ActualMigrations!D$3),
--(Table_owssvr[Department]= $A6), --(Table_owssvr[Is_Migrated]="TRUE"))
It returns nothing even though the Is_Migrated is TRUE
I'm currently using the following function: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000") which works perfectly. However I'd like to add another condition "between 1000 and 2000".
I've tried this but I'm not getting any luck: =COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],AND("<1000",">2000")).
I have a code that searches in a column for a certain value, if it finds it, it copies this value to a range adjacent to it.
[Code] ..........
However, if the cell where the code is supposed to find a new value is blank it makes the range blank. But in that case, I wan't it to leave the range cells with their original value.
I have this formula in my spreadsheet =IF(ISBLANK(B2), "", C1+1). I need to add a "dash T" to this formula so it shows up in every cell. How and where do i write that into a formula?
View 2 Replies View RelatedI have a Excel 2007 spreadsheet of part numbers and quantities sold. In the spreadsheet we have similar part numbers, but my sumif command is adding these together. the parts are :
0124225031
R124225031
My column of part numbers is formatted as text
My formula is this =SUMIF(Sheet1!H:H,A16,Sheet1!Q:Q) where H is the part number and Q is the quanity
I tried adding a format command in the sumif command, but it returned a 0. =SUMIF(Sheet1!H:H,format(A16,"0"),Sheet1!Q:Q)
better formula and why is excel adding different part numbers together?
Title: How do I add a condition to an IF and Vlookup Formula:
I need to edit a formula to include a condition. I attached an excel file for ease of explaining the problem. I want to say if $E$5 has “A to B” then F5 will automatically have BOR, but if E5 has anything else then the Vlookup formula applies.
I was thinking something along this formula:
=IF(AND($E$5<>”A to B”,ISBLANK($B5),"",VLOOKUP($B5,'Drop Down'!$D$1:$E$500,2,FALSE)))
I know I need to add “BOR” in the formula above somewhere
Where am I going wrong?
=IF(SUM(Q4)=0,"",MAX(0,G4-MAX(F4,Q4))/7) - to calculate number of days for year
=IF(SUM(TODAY()>G4),(G4-MAX(F4,Q4))/7,SUM(TODAY()-MAX(F4,Q4))/7) - to calculate number of days year to date
I am using this condition to calculate the length of a service which falls with in a specific review period, eg
Service starts 1 Feb 09 and finishes 30 April 09
The review period is 1 Mar 09 and finishes 31 May 09.
I would need to measure the number of days that fall within the review period, which would be 1 Mar 09 - 30 April 09
At the moment I am missing a condition which identifies whether to subtract from 'service end date' or 'review end date'.
I'm preparing Quarterly Evaluations, and am having an issue because an Analyst has superseded an overall percentage goal. In the attached example, it is the overall evaluation with the 'problem data' in red D19 and highlighted.
I'd like to add a condition that limits the points in D19 for 'responsibility 3' to 150.
=IF(ISERROR(C19/B19)*(B10),"-",(C19/B19)*(B10))
*just a note for clarification, the other two responsibilities are a 'per hour' weekly goal, whereas the 3rd is an overall personal effort divided from the overall team effort.
Adding condition to SUMPRODUCT causes result to go up? (2007). I have the following formula:
View 5 Replies View RelatedI have a spread sheet I use to track tools. One tool may be checked out / returned several times a week. When I do custom sorting I end up with the Tools listed neatly by date and number. EX: ...
View 10 Replies View RelatedI am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
SUMPRODUCT(COUNTIF(N3,"*"&References!$F$2:$F$34&"*"))
I've done this before but can't remember how I did it:
1BCDEFGH21234533red92701131096601005096604green20070582305250044940472805
blue0355203912033930389706bpink51059230632205352061280789-In column H,
I want to sum only rows that are less than or equal to cell H2.....
The issue is the I want to put the condition here in my the code that only copies the desired cells if the sheet is named specifically such as "Jan", if not named as this the worksheet should not be used. The current code I am using was posted on this site in 2009: VBA to copy specified cells from all the files in a folder
My modified code is:
Option Explicit
Public strSourceFldr As String
Public EachFile As Object
Public objFSO As Object
Public objFolder As Object
Public objFile As Object
Public strSheetName As String
[Code] .........