I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)

Someone will enter their financial year end in the worksheet e.g. 31/03/2014 and I then have 12 cells below it called Month 1, Month 2 etc up to Month 12. I need the cell next to Month 1 to calculate what it would be... so for a Year End of 31/03/2014 month 1 would be April and this needs to apply to the 12 months.

formula off here i use all the time relating to finding and sumproducts for specific months and years i.e.

Jan 2008, Dec 2007.. depending on these dates excel searched through a specified range and returned me any values i wanted like No. of occurences, totals, sums etc etc it was a sumproduct formula...

is there any way i could specifiy a date i.e. Jan 2009, which would search column a and return the date /and/or an account number in column b, only if the date was during jan 2009?

The reason i want this is to use a lookup on the account numbers to return specific items of info, but i only need the account numbers if they occurred in specific months which i want to choose.

I have a sheet in my workbook with at least 180 small tables, there may be more. I woulds like to be able to change total formulas for all tables at once to show either year-to- date or total year.

For example: If we have only progressed through the second period of the year, I would like to choose something to indicate period 2. At other time I may want to know the total year whether the periods are completed or not.

I am working with a fiscal year that starts in December and ends in November. I want to make a user defined function that will return the fiscal year of a date. I've created the below code, but it returns a zero.

Function FiscalYear(DateFY)

If Month(DateFY) = 12 Then Year (DateFY) + 1 Else Year (DateFY) End If End Function

I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.

'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen

ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here

Looking for a formula to compare current year values to previous year values. For example, if the current year has values for the month of January through March (100, 100 and 150), current year value will be 350 and the previous year value will be 975 (i.e. 300+275+400). The aim here is to make the previous year months summation equal to the present (or current) values. As new values are entered for the current year, the previous year's values will have to change to reflect the new month's value entered for the current year.

Month 2012 2013 Jan 300 100 Feb 275 100 Mar 400 150 April 650 May 454 June 800 July 500 Aug 375 Sep 525 Oct. 300 Nov 410 Dec 510

Sample file is attached : Comparison_Years.2011.xlsâ€Ž

I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.

The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.

Is it possible to format cells to convert a date format of month/day/year to = year/week #/day of week? For example, 04/05/07 (April 5, 2007) would read as 7145, (7=last digit of year/ 14 = week number / 5 = day of week....Sunday being the first day of week)

I am trying to do an IF statement, if the activecell's value is equal to this current year, do nothing and if its not the current year, to offset one column to the right and insert a blank column, then copy the whole column to the left and replace it with the new blank column.

I know that in order to draw a chart where a data line for a certain period is compared with the same period the previous year, one should have the 2 sets of data of different year side by side columnwise. However, is there a way where I could still churn out the same line chart when the data is all on a single column?

I'd like to know a formula which can calculate the moving annual total, that is the sum of the last 4 quarters. Now every time the sales from a quarter is known, i have to recalculate the MAT mannually.

In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?

The '085' is the 85th day of the year. I would like a formula that reads that part of the data, and return the month that day is in, in the "jan", "feb", "mar", etc. format.

I have a financial model that returns ratios for various years. I would like to highlight in the summary part of the model those years where the ratio is over a set threshold.

For example:

A B C D ...

1 2013 2014 2015 2016 ...

2 31% 29% 41% 28% ...

3 Max: 30%

4 2 years over Max: 2013, 2015

In the above example, the threshold (Max) is 30% (cell B3), so the value in A4 would be "2 years over Max: 2013, 2015"

I have been able to do it manually by putting together a COUNTIF function along with various IF statements as follows: =COUNTIF(A2:D2,">="&B3)&" years over Max: "&IF(A$2>$B$3,A$1&", ,"")&IF(B$2>$B$3,B$1&", ","")&IF(C$2>$B$3,C$1&", ","")&IF(D$2>$B$3,D$1&", ","")...

I even managed to get rid of the final "," by adding a second "," at the end and replacing the expression ", ," using the SUBSTITUTE function (yes, I am a bit **** when it comes to details).

My problem is that I currently have 16 years of projections and, although the above formula works, it requires manual changes every time I add / remove years.

I know that I can do it easily in VBA but the Excel file is to be shared with others via email and I know that their systems are setup to deactivate macros by default (and I don't want to rely on the user having to manually activate macros).

In cell b2 I have a formula =text(today(),"yyyy") which daisplays todays date as a year, in cell b3 I have =text(today(),"mmmm") which displays todays date current month.

I have a column of Months and Years

January 2014 February 2014 etc

I need todays (current) month and year to indicate in a helper column next to the relevent month and year as a number 1 to use as a reference to return date from the row where the 1 is displayed, I have tried =if(and(b2=a10,b3=b10),1,"")) and it dosent like the fact that the year in the colmuns is entered as standard text, is there any whay to do this?

I want to use a COUNTIF to return the sum of all the dates that fall within a given month/year. For example: E1 Contains the date July-2009

Column A has date entries such as July 3, 2009, July 18, 2009, August 4 2009. In F1 I want to return the sum of all dates that fall within the month of E1.

I have a workbook with two spreadsheets in it. On the second sheet there is a large table, which column headings are months and years (e.g. Jun-07 Jul-07, Aug-07, Sep-07....). I was trying to write an excel vba code that would search the first row (column headings) to find the current month and year, and copy the corresponding column along with two previous columns (months) to the first sheet. I would like to have a code that will be able to do this in Jan-08, Feb-08, or Jan-09 as well.

Financial Year ended on 31st March. If date is 18th August 2008, Then last date for financial year is 31st March 2009. IF date is 15th March 2009, Then also last date for financial year is 31st March 2009. I want formula / function to get last date of financial yera.