I am working on a worksheet where users are asked by a userform combo box to select a product. When they select the product a picture of that product appears in the top left corner of the worksheet.
I have managed to get the picture to appear however delete any pictures that were in that cell before pasting a new one, cause when changes the product a picture is pasted over on top of the previous one however if the pictures are not the same size you may see the previous under the current.
delete any previous pictures. Here is the code I have so far.
Sub GetPicture()
Set Rng = Sheets("Products").Range("A2", Sheets("Products").Range("A2").End(xlDown)) '.Resize(, 10))
I have a worksheet into which have been imported a number of pictures, The pictures have all been imported and sized to appear to fit into cells. I have a program which deletes all of the pictures in one go but I would like to be able to just delete all those in one row. I'm not sure how to address the row as I believe pictures are objects sitting on top of the sheet and not actually in the cells What I have tried is:
I have an workbook with pictures that are linked to external picture files, and they are placed in the workbook via macro. When I email the file to another computer and open it, the pics do not display and show an error:
The linked image cannot be displayed. The file may have been moved, renamed, or deleted, Verify that the link points to the correct file and location.
I would like to be able to save the workbook with the pictures in them (without having to archive them) so that I can open it and see them on another machine.
I have a spreadsheet with multiple similar entries I would like to add up. What would work well for me is to be able to input a column like a and a target column like e.
So in this case it would search throughout column a and wherever it finds a duplicate entry add column e and then delete one of the rows. I could then run it again under different column criteria if needed.
So if I had the below sheet:
I could search by column a and add up column h to read like this:
I am trying to create two macros. The first macro will add a button, and the second macro will delete the button. I am noticing that when I add the button in the first macro, Excel is automatically naming the button (i.e. Button 26), and then when I try to delete the button with the second macro, this button name is not recognized. How can I name or set the button as a variable so that I can successfully run these two macros?
I am using several formulas to conditionally format and fill in rows from column A to column BS. These are the formulas and application areas:
=$BS4<>"" Applied to =$A$3:BS$350 =$G3<>"" Applied to =$A$3:BS$350 =OR($J3="Regional Manager",$J3="Assistant Manager",$J3="Manager") Applied to =$A$3:BS$350 =OR($J3="Recruiting Manager",$J3="Owner",$J3="District Manager",$J3="Office Manager") Applied to =$A$3:BS$350
If I do not add or delete any rows, everything works just fine. The problem I am running into is that this list is constantly updated and rows are being added and deleted. When I do this, it duplicates my rules and changes my applied to ranges. Here are some examples of the changes:
=$N$3:$BS$3 =$A$3:$M$63 =$N$4:$BS$64
This creates much excess work, when I have to go back and change everything back to the way it should be. how I can either modify my formulas or application areas to correct this situation?
I have a spreadsheet with 20 or so columns but that number can change at any time. I need my code to by dynamic so if a column is deleted (or added) my code will still work.
Each column has a name in row 2 and I'm trying to use that in order to make everything dynamic. For example, my code counts the number of blue cells in colums D4:G68, but now if someone adds a column before column D, everything gets messed up and it will still count the cells in D4:G68 but I want to use E4:H64 now. Does that make sense? I have made code that searches the column names and returns the column number to correspond to the name. How would I change this?
Range ("C8") = "= CountBlue(E4:G68)"
the code doesn't look exactly like this, I believe it is actually in R1C1 format
I have a Productivity Report that contains very basic formulas that provide totals for 4 columns (B6:E6) and an average for one column (F). I have included two command buttons, one to add a new row and the other to delete a row.
I need to be able to add or delete rows depending on how many employees' productivity I will be tracking on any given week; each row represents a separate employee. I need the following functionality out of my form:
1) formula in column F needs to copy and paste with each new line 2) when a new line is copied and pasted I need the contents to be cleared 3) I need the user to be blocked from deleting the first row (3 on this form) in the table
The code I'm using for my "Add" button is:
[Code].....
The code I'm using for my "Delete" button is:
[Code] ..... The buttons add and delete rows as I'd like them to but content is not clearing, with each row added the contents provide a sub total. I've tried various lines of code (some more complicated and some less) before I recorded my own macro (see above).
ColumnA in my data base contains dates. How can I delete the entire row if the date is before today's date and add a new date at the end of the range to replace the deleted row.
I currently have the following Macro for one of my many checkboxes in 2007 Excel:
[Code] .....
It works perfectly until additional rows are added/deleted before the indicated rows in the code (It changes the number sequence in the workbook). The number sequence stays the same in the code which means I am now hiding rows either before (delete rows) or after (insert rows) the intended rows I want to be hidden. Is there a way to change the above code to remain with the assigned rows regardless of the adding/deleting of rows before it?
I'm using Conditional Formatting for an entire column to check the value of each cell and compare it to the value of a cell in the same row but a different column. (Cell Value equals =$D2) It works great until I insert or delete a cell in the formatted column. The reference does not change as one would expect. I've played around with formulae such as =$D2<>$P2 but the reference only changes for the P2, not the D2. I've also tried using =CELL("contents", ADDRESS(Row(),4)) but this causes excel to complain.
1. I added pictures(print screen-->mspaint-->cut existing part of the image-->paste into excel. In excel they are called "Pictures 01 thru Picture X" with the pull points all around. 2. I located them in specific cells of the grouped type with the (-) sign appears so the group of cells are in use 3. When I close the Group(+) of cells all the pictures are jumbled above the closed cells.
Question: Is there away to keep these pictures within those cells when closing the group, so they will not been see as well?
is you had two ratings, one bad, one good, could you make a differant picture show up for the differant ratings using an IF function or simmiler fuctions (So like if a 'dance rating' is bad if it is under 13 and is good over 13 then have a picture of John Travolta for good and a picture of a hippo for bad as a bit of a joke on a identinty card sort of thing)?
I know quite alot about exel and have tried to make my formular but as it is saved on the school server i can not acsess it until tomorrow but i will try and make that work and post it if it dose
I have imported and deleted several pictures into my worksheet. I want to re- name or re-order my pictures. Right now, a new pictures is name "picture 4" when there might only be two pictures in the sheet. I want to rename to say "picture 2" as I have a macro that calls for "picture 2" I know this should be simple, but I don't know how to do this.
since my pc has updated to ie7 all pictures that I open via hyperlinks from excel now open in and internet explorer window instead of windows picture & fax viewer as JPEG's are set to.
If I open the JPEG files directly they open with the correct program.
I'm sure it must be a setting somewhere but I cant find it.
I am absolutely new to visual basic thing but have a good idea of what I am doing in excel. I have seen some code to delete pics but can't figure out what it is that I am suppose to do. What I am doing is coping and pasting something from the internet. I do not need any of the pics that are pasted into the worksheet and am tired of deleting them individualy.
My macro suppose to loop on every charts in the workbook and change them to pictures , I'm using the Pastespecial method to do it but sometimes I'm getting a 1004 error in the line that do the paste command. Is there is a better way to do it? ..........
I am having some trouble with the vba code I'm using to reference pictures. Now please bear with me, I'm don't know vba whatsoever and am copy/pasting what I found on the internet.
The spreadsheet in question is attached....
The issue:
I am trying to show a picture based on the inputs in the cells above. Basically the picture in cell A28 is referenced by the information in cell AI7. The picture in cell D28 should be referenced by the information in cell AI8 and so on.
The problem is that when I enter the code to insert multiple pictures, it comes up with errors.
I'm hoping this is just my lack of programming knowledge and this is an easy fix. Please tell me where I am going wrong.
Also, will there be an issue if I reference the same picture multiple times?
I discovered this sample database sheet (attached) on the forum I wanted to ask if a picture can be linked included? i.e. when entering a new record a picture (stored in a directory) can be added and linked to that record. Then when reviewing the records the picture is then displayed.
I'm trying to create a geography project for my upcoming primary class but my Excel expertise is limited. I am trying to import small jpg's from a folder and then make them appear in a userform or Msgbox. Is it possible?
So far I've created a very simple way to display the text in a message box but I would also like to be able to display the flag. Macros 2 & 3 are initiated by clicking on images while macro1 displays the information:
