I currently have this formula to deal with this:
=SUM(J5:INDEX(J:J,ROW()-1))
However, whenever I delete the top row...I get a reference error and have to re-adjust...
I currently have this formula to deal with this:
=SUM(J5:INDEX(J:J,ROW()-1))
However, whenever I delete the top row...I get a reference error and have to re-adjust...
I have this spreadsheet that I am creating schedules for my employees since our scheduling software at work is horrible to work with. It calculates total hours for each employee at the far right of the rows, and calculates total hours for each day in the columns. The formulas that calculate the hours for each day is set up to automatically deduct 30 minutes from a shift, for lunch, if they're scheduled for more than 5 hours (the gray shaded employee rows are for managers and that only deducts 30 mins if they're shift exceeds 8 hours).
I'm familiar enough to put somewhat complex formulas together, but I don't understand it enough to always make them work correctly. What I'm wanting to be able to do is add or subtract entire rows (add new employees or remove old), and have my formulas for calculating the total hours to still work. Right now if I delete a row the cell with the formula in it says #REF!. I can fix this by going through the formula and manually deleting everything in that contains those other cells, but the formula is huge, and it's pretty tedious going through the whole thing when it feels like there should be a simpler way of doing it.
TLDR: I want to be able to add/remove a row and have my cells currently on row 36 update the formula correctly.
I have a spreadsheet with multiple similar entries I would like to add up. What would work well for me is to be able to input a column like a and a target column like e.
So in this case it would search throughout column a and wherever it finds a duplicate entry add column e and then delete one of the rows. I could then run it again under different column criteria if needed.
So if I had the below sheet:
I could search by column a and add up column h to read like this:
I am using several formulas to conditionally format and fill in rows from column A to column BS. These are the formulas and application areas:
=$BS4<>"" Applied to =$A$3:BS$350
=$G3<>"" Applied to =$A$3:BS$350
=OR($J3="Regional Manager",$J3="Assistant Manager",$J3="Manager") Applied to =$A$3:BS$350
=OR($J3="Recruiting Manager",$J3="Owner",$J3="District Manager",$J3="Office Manager") Applied to =$A$3:BS$350
If I do not add or delete any rows, everything works just fine. The problem I am running into is that this list is constantly updated and rows are being added and deleted. When I do this, it duplicates my rules and changes my applied to ranges. Here are some examples of the changes:
=$N$3:$BS$3
=$A$3:$M$63
=$N$4:$BS$64
This creates much excess work, when I have to go back and change everything back to the way it should be. how I can either modify my formulas or application areas to correct this situation?
I want to delete rows in whole list and numbers of rows to be deleted I have in for example C column. How to do it?
View 9 Replies View RelatedI have a Productivity Report that contains very basic formulas that provide totals for 4 columns (B6:E6) and an average for one column (F). I have included two command buttons, one to add a new row and the other to delete a row.
I need to be able to add or delete rows depending on how many employees' productivity I will be tracking on any given week; each row represents a separate employee. I need the following functionality out of my form:
1) formula in column F needs to copy and paste with each new line
2) when a new line is copied and pasted I need the contents to be cleared
3) I need the user to be blocked from deleting the first row (3 on this form) in the table
The code I'm using for my "Add" button is:
[Code].....
The code I'm using for my "Delete" button is:
[Code] .....
The buttons add and delete rows as I'd like them to but content is not clearing, with each row added the contents provide a sub total. I've tried various lines of code (some more complicated and some less) before I recorded my own macro (see above).
Attached File : Productivity Report (HH).xlsm
ColumnA in my data base contains dates. How can I delete the entire row if the date is before today's date and add a new date at the end of the range to replace the deleted row.
Will excel allow text to be permanently be positioned in a specific cell even if rows or columns are added?
View 6 Replies View RelatedI currently have the following Macro for one of my many checkboxes in 2007 Excel:
[Code] .....
It works perfectly until additional rows are added/deleted before the indicated rows in the code (It changes the number sequence in the workbook). The number sequence stays the same in the code which means I am now hiding rows either before (delete rows) or after (insert rows) the intended rows I want to be hidden. Is there a way to change the above code to remain with the assigned rows regardless of the adding/deleting of rows before it?
I'm using Conditional Formatting for an entire column to check the value of each cell and compare it to the value of a cell in the same row but a different column. (Cell Value equals =$D2) It works great until I insert or delete a cell in the formatted column. The reference does not change as one would expect. I've played around with formulae such as =$D2<>$P2 but the reference only changes for the P2, not the D2. I've also tried using =CELL("contents", ADDRESS(Row(),4)) but this causes excel to complain.
View 3 Replies View RelatedI have a table upon which I wish to perform vlookups, however I need to be able to adjust the range that the vlookup searches to include any data that may be added in the future without having to go into the sheets and change the vlookup.
Example
Name DOB
Tom 01/01/81
Dick 02/02/82
Harry 03/03/83
if someone then adds
Fred 04/04/84
I would like the vlookup to automatically accommodate the extra entry without needing any changes.
I've seen this done on data validation with the following formula:
=OFFSET($a$1,0,0,MATCH(REPT("z",255),$A:$A))
It only needs to do new rows, not columns.
I am using the =today() function to places todays date in a cell...how can I get the next to cells to automatically display dates that are 2 months and 4 months later without having to change them manually every day. FWIW, this is for an certification expiration chart.
View 4 Replies View RelatedI have a spreadsheet where I will input details for "incidents" under different headings on one row per entry (I will have a separate tab for each "incident", and each row will relate to each customer affected by this incident)
For every row that is completed I have a "Summary", which is just a section of the same worksheet, that will list all the basic details of the above entries in a format that will be printed and passed to a different department.
As I will be unable to determine whether a particular incident will have 5 entries or 50, I need a way to add a new row to my "Summary" section if and when a row is completed.
I have a formula to populate the data in the "Summary" section automatically, so all I need now is for it to add new rows as and when they are needed, copying the formulas from the original row, so each new "incident" entry is copied each time.
I have created a dummy spreadsheet but I'm not sure how to attach it to this post.
This is for a call centre and sales office. there are 3 tabs. Tab 1 represents the values that we update at the end of each week which then gives a running total over an 8 week period and then an average below. there is a seperate table for each staff member. Tab two is for one team of people and tab two is for the other team. Namely LG team and Sales Team. the tab 2 and 3 are to show league tables that both collect data from tab 1, but then create a league table showing who is top dog over the 8 week period. But this also has to self adjust to be in order.
on tab 2 and 3, the tables on the left will be hidden once complete, but are there to work out the league. the table on the right is then there to put and show the league in the right order. I HOPE THAT MAKES SENSE, COS EVEN I'M LOST NOW. I've followed previous advice on this and inputted what I think are the right formulas, but for some reason it's coming up with the wrong answers and several names are being repeated which are wrong. For example even when ben perhaps is number 2, it will show rahim as number 2 and number 3. why is this?
also, how do I get by the problem of on the odd occassion when perhaps ben and rahim have the same stats and are joint second, but it will only show ben as 2 and ben as 2 again, leaving rahim out of it. WOW. I'm glad I've got that out of my system. I was doing the washing up yesterday donig Excel formulas in my head. But the washing up got done at least.
I have a data set of 300 points and i want to increase my data range by a factor of 10 .
For example if i have Column A with master points A1=10 A2 = 20 A3 = 30 .
I would like to be able to automatically enter in the same about of new rows between each point . Then calculate there difference between the master points and populate the new rows in sequence . For example The difference between A1 and A2 = 10. So the new A2 would be 11
I would like to have A1=10 A2=11 A3= 12 A3=14 Etc as the new cells.
I'm using a workbook that has one sheet that pulls data from all the others, displaying a series of rows that summarizes data from each worksheet, each of which is full of data. Its a worksheet that a lot of people use so its kind of tedious to use as of now, because whenever you add a new worksheet of data you have to manually create a row and then manually change all the worksheet references. Is there a way to make rows automatically add and update when a new worksheet is added? I know it would probably have involve some sort of Macro or VBA.
View 1 Replies View RelatedMoving Colored Text within a automatically adjusting table containing More Than 3 Colors, from Coloum to Coloum. i have managed to put this little chart together to use on our gaming wedsite but i would like to go one step further with it. may table automatically moves the colums up and down the table as i enter the infomation in to it,, "but" I the colours in the text do not stay the same as they move up and down the coloums. how to make the coloured text keep its colour in the table as it alters its position in the table
View 9 Replies View RelatedI tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.
The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.
I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.
I am hoping there is either an easier button system or way to make buttons adjust somehow.
I am not the most advanced VBA user
I have a user form with combo boxes. The user selects items from the combo box and when they click the command button the selection is written to the spreadsheet. Each time the button is clicked it adds an item to the sheet making a list of items. I am trying to assign a number to each item when the command button is clicked so I have numbered list. Here is my code so far:
Private Sub cmdbtnAdd_Click()
Dim RowCount As String
'Writes user inputs to Active Worksheet when Add Item Button is clicked.
RowCount = Worksheets("Sheet1").Range
("A1").CurrentRegion.Rows.Count
With Worksheets("Sheet1").Range("A1")
.Offset(RowCount, 0).Value = ' This is where I have been trying to code in the numbering
.Offset(RowCount, 1).Value = Me.Combobox1
.Offset(RowCount, 2).Value = Me.ComboBox2
End With
End Sub
Need code for adding up rows of cells of text mixed with numbers, each row would look like
b1230 10 7/8 Gables 3/4 Pref Birch
b2230 10 7/8 Gables 3/4 Pref Birch
b3230 10 7/8 Gables 3/4 Pref Birch
b4230 10 7/8 Gables 3/4 Pref Birch
b1138 1/2 10 7/8 Base 3/4 Pref Birch
b2138 1/2 10 7/8 Base 3/4 Pref Birch
b3138 1/2 10 7/8 Base 3/4 Pref Birch
b4128 1/2 10 7/8 Base 3/4 Pref Birch
and i would like to make them add up to look like this
b1, b2, b3, b4 8 30 10 7/8 Gables 3/4 Pref Birch
b1, b2, b3 3 38 1/2 10 7/8 Base 3/4 Pref Birch
b4 1 38 1/2 10 7/8 Base 3/4 Pref Birch
I'm writing a code to adjust the height of the row based on the wraped lines. I want it to be "16.5 * (number of lines)".
First I counted the number of lines in each cell. I wrote at D1 the formula to calculate the lines at A1:
=LEN(A1)-LEN(SUBSTITUTE(A1;CHAR(10);""))+1
Then I wrote this vba code to adjust the height:
Sub AdjustHeight()
Dim x As Double
x = 1
For Each Cell In Range("A1: A11")
Cell.RowHeight = 16.5 * CELL(D"x")
x = x + 1
Next Cell
End Sub
How do I do that multiplication? How can I tell it to multiply 16,5 with the value of the cell D"x"? Is this the best way?
I am working on a worksheet where users are asked by a userform combo box to select a product. When they select the product a picture of that product appears in the top left corner of the worksheet.
I have managed to get the picture to appear however delete any pictures that were in that cell before pasting a new one, cause when changes the product a picture is pasted over on top of the previous one however if the pictures are not the same size you may see the previous under the current.
delete any previous pictures. Here is the code I have so far.
Sub GetPicture()
Set Rng = Sheets("Products").Range("A2", Sheets("Products").Range("A2").End(xlDown)) '.Resize(, 10))
[Code].....
I am trying to create two macros. The first macro will add a button, and the second macro will delete the button. I am noticing that when I add the button in the first macro, Excel is automatically naming the button (i.e. Button 26), and then when I try to delete the button with the second macro, this button name is not recognized. How can I name or set the button as a variable so that I can successfully run these two macros?
View 6 Replies View RelatedI have a spreadsheet with 20 or so columns but that number can change at any time. I need my code to by dynamic so if a column is deleted (or added) my code will still work.
Each column has a name in row 2 and I'm trying to use that in order to make everything dynamic. For example, my code counts the number of blue cells in colums D4:G68, but now if someone adds a column before column D, everything gets messed up and it will still count the cells in D4:G68 but I want to use E4:H64 now. Does that make sense? I have made code that searches the column names and returns the column number to correspond to the name. How would I change this?
Range ("C8") = "= CountBlue(E4:G68)"
the code doesn't look exactly like this, I believe it is actually in R1C1 format
I need to stop users from adding and deleting sheets in a workbook
My idea was obviously to disable the command bars to add or delete sheets in open event and then put back in before close.
But then i thought...whats stopping them from right clicking the sheet tab and inserting a sheet, can i remove that menu to...?
I also wasnt sure if there were short cut keys to add or delete sheets.?
Some of my users use excel alot so i want to account for an tips they know that i might not.
I have two seperate lists. One on Sheet 1 and One on sheet 2. What I need to do is take the list on sheet 2 and compare it to the list on sheet 1. If any of the items appear on sheet one, I need to delete those items form sheet 2.
So in the end the only items left on sheet 2 will be items that dont match any items on sheet 1
I have a customer data base going across each row about payments/address/DOB etc. When i go to alter some information in certain cells the rows become uneven and the information for customer B1 will be for C1 instead. I'm not familiar with excel but what i did notice when scrolling down i saw an outline of uneven rows.
View 1 Replies View RelatedThis is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
[URL] .... If you take a look at the picture, what I'm trying to do is add the list of Prices up so that I can differentiate the amount received in $ and in £.
I need to add up all the numbers that don't have a $ in front into the 1 cell, and all the ones with the $ in front into another cell.
FEdLkuj.jpg