I was given a spread sheet with a number of payments on it, I was asked to take the "four" potential payments and only show one total payment. There are 2900 lines in my file and as you can see from the example the scenario repeats it self with the "four" payments all the way to the bottom. I would like to be able to add H2 to H5, total that number in J2 and delete row 3,4 and 5. This then has to be continued all the way down to line 2878 where I could then run a macro I have to delete blank rows cleaning my spreadsheet up. I would take a looping or user controlled macro (ctrl +) so I don't have to do this manually.
I am having difficulty expressing a formula so that if a cell is greater than zero, it adds the value of that cell to a String figure. I have got as far as the following, the 'problem' area is in red.
Sub Share_Sales3() Dim Prompt As String Dim Caption As String
I need capture a cumulative estimate as it moves from left to right across the page with each passing month. The estimate is pre-filled in for all the months. My task is to select from October to the current month and sum. Is there a way to do that in VBA?
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following: Within a workbook the 1st sheet is the data entry. In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example: Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry. G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I need a formula to know the total specially for each of the numbers in column A. Like for e.g when you see 1 in column A I need to to know the total by adding all the numbers just for 1 in column B. So the total for 1 in this sheet would be 10+85+5=100. So automatically the answer should come as 100.
I have a spreadsheet where I need to take the subtotal from D13, D21 and D 25 and make a total on D26. the same for E & F. I know this has to be very easy but I just can't figure it out.
I want to do a basic formula for a poker account to work out my P/L.
I have two sheets. The first sheet will record my P/L and the second sheet records deposits and withdrawals.
When I input a figure into Sheet 1, Cell A1, I want it to then be able to add to this figure the total that is in Sheet 2, Cell A1. Is this possible? This way the figure that I input into Sheet1, Cell A1 will give me the profit/loss after taking into account any deposits/withdrawals.
ie If in Sheet2, Cell A1 I have a deposit of -500. When I type into Sheet1, Cell A1, a figure of 800, it will then change to 300. It will add 800 less 500 = 300.
[URL] .... If you take a look at the picture, what I'm trying to do is add the list of Prices up so that I can differentiate the amount received in $ and in £.
I need to add up all the numbers that don't have a $ in front into the 1 cell, and all the ones with the $ in front into another cell.
Basically the first worksheet (equipment list) is set out for parts used for each individual unit which can be printed out for each unit.
The second worksheet is an equipment list, where each part number and quantity required is displayed which can be sent to suppliers for ordering.
At the moment I
-> copy the equipment list to a new worksheet -> do an advanced filter for "Unique records only" -> =SUMIF('Equipment List'!B:B,'Parts List'!A16,'Equipment List'!D:D)
which is much faster than the way we used to do it.
The problem is, when I add a part to the equipment list that is new, I need to go through the process again.
Is there a way to automate so any parts I add to the equipment list, if it is the first time the part number has been entered, it will copy to the parts list worksheet and update the qty column or if it is an existing part number it just updates the qty column?
The equipment list may potentially have up to 100 different drives, but using mainly the same equipment.
I created this sample on an old desktop using excel 2003 but I use 2010 on my laptop.
I need to remove numbers from a string of text and put them into new cells in Excel Starter 2010. There are two different values which need moving. The first is in parentheses and the second follows the parentheses.
Here's a few examples of what I mean:
Original text RED008 - Wickaman and Hoodlum bandwidth (0.06Gb @ 2.00) 0.12 MFR005EP - Various Artists bandwidth (0.19Gb @ 2.00) 0.38 RAZORS010 Future Cut bandwidth (0.01Gb @ 2.00) 0.01
would like to split into...
Cell 1 RED008 - Wickaman and Hoodlum bandwidth MFR005EP - Various Artists bandwidth RAZORS010 Future Cut bandwidth
I have an issue with two columns in Excel 2007. The first one has a bunch of numbers that run from top to bottom and I would like to move all of the negative numbers from the first column to the second one. I understand that this can be done with the IF command
i had a subtotal sheet with more than 5000 rows of data.i applied subtotals for my data.i just want to serial numbers for each of the subtotal.what is the easy way for numbering my rows with sub total.
My subtotals are in column A.i inserted a column before it and want to show the row numbers which contain the subtotals.
Keeping track of racing point scores and I am trying to figure out a formula that will allow me to take the top 6 out of 8 values and total them. We compete in 8 races but the total points standings at the end of the season takes the best 6 out of 8.
For example
Racer 1 100 200 150 90 300 250 210 95
I am looking for a formula that will give me a total of the HIGHEST 6 scores. I tried the =max but that will only allow you to get the HIGHEST value.
I’m creating a spreadsheet (attached) that needs to divide up aisles in a warehouse into sections, so that each section has an equal (or as close as possible) amount of work. The “To, From” columns are aisle ranges and the “Moves” column is the amount of work in that range. I need a macro/formula to add up numbers under “Moves”, but only up to the point where the sum is as close as possible to the number in K2 (variable). It also needs to look at the number under “sections required” (I2) (variable) and then split the aisle ranges into that many sections.
I'm working on an excel for work. It lists the days on the column farthest left, and with some variables calculates the total number of tons we have for the day on another column. For part of it I'm wanting the program to calculate how many tons we process for each day. The problem is that each days will have a different number of entries. For example:
June first has 6 entries June second has 3 entries June third has 4 entries
So I'm wanting to make another column seperate from the original data that calculates total number of tons from the entries for the day without saying cell=sum(the 6 entries from the first), cell=sum(3 entries from the second).
I'm not sure how to go about this, I thought if I could get a recurring if statement that would test all of the entries for the date, and if it matches sum them up. I'm just not sure how to go about it.
I do a lot of work in excel to do with accounts and this often needs checking against sage. When the invoices/petty cash sheets are put into sage the total amount is put in, but in my spreadsheets I need to split the reciepts. So I was wondering if there was a formula/VBA code, that if I only knew the total of the invoice would find which cells added up to this total?
In Cell A1 I have a name (John Doe). In cell A2 I want the formula which will be a number total. In Cells A4:A20 I have a list of names with John being in several of them. In Cells J4:J20 I have numbers. There is data in between the name and numbers that I don't need.
So, I want A2 to search A4:A20 and everytime it sees John Doe to add the numbers that are 9 cells over (J4:J20). This is basically to show how many mistakes John has made (total). I tried =Sumproduct((A4:A20=A1), (J4:J20,1,0)). I know I am missing something or not on the right track.
I am attempting to create a chart from data generated outside of Excel 2003 SP2, that has been Copied and Pasted into Excel. There is no metadata associated with this data. I have created a list with the data once it has been pasted into Excel 2003 SP2.
The Workbook has five (5) worksheets, all with the default names (Sheet1, Sheet2, etc.). I paste the data into Sheet1 and reference this from the other worksheets. Sheet2 shows the charts for all the data. Sheet3, Sheet4, and Sheet5 are each for different regions, North, South and West respectively. I would like to enter the formula into Cell: Sheet5!M5 so it auto populates with the appropriate and correct information. Sheet1 information is as follows;
Column B has a header of "CreateDate" and is in the format of; 4-Jun-07 Column O has a header of "Business Unit" and has three (3) possible answers, North, South or West. **I have attached a screen shot of the two colums used named, "Columns.Used.png". I have hidden the columns in between as they contain confidential information.**
I would like a formula that gives a total of one if both criteria are met. The criteria is as follows;
IF Column B on Sheet1 equals Cell L5 on Sheet5 AND Column O on Sheet1 equals West THEN the total should appear. **I have created and attached a sample spreadsheet "Sample.Data.zip"that contains only basic data on Sheet1 and Sheet5 as those are the only sheets relevant.**
If a red number to the right shows up anywhere on the left black numbers then I want a total in column G. I want it to automatically total the matching numbers. How can I do this?
Column C contains zip codes. Column D contains # of adults in the household. Column E contains # of children in the household.
How might I create a formula that calculates a total # of adults AND children in Columns D and E based upon a series of specific zip codes (but not all the zip codes) in Column C?
If you have a single column of random numbers, is there a way to give Excel a total amount you are looking for, and have it choose which numbers in that column total to that amount?
I have a UPC list. Some are more than 12 digits, and some with less than 12 digits. I need to make sure there are 12 digits in each UPC. I know how to count using LEN, strip leading zeros of those UPCs that are >12 digits using RIGHT.
What I need now is any number with less than 12 digits, such as 000123, add a 4 to the beginning (4000123) and fill in '0's in between the 4 and the short UPC number to make 12 digits, 400000000123. They vary from 1 to 13 digits.
I want to make a crosstable (7 columns X 6rows) but the thing is that I only have the total number for each row and for each column, how do I do to get the whole numbers of the crosstable?
I am working to develop a spreadsheet that takes user input (from a barcode scanner, that issues a hard return, limiting my information to a single column) in the following order. User ID, this is an Alphanumeric unique ID (AA1AAA) or user id. Followed by a pick ticket ID the value of the pick ticket ID will always be above 100000 (ie 123123) followed lastly by the number of lines on the pick ticket id (this number never exceeds 15)
So an example data set would be: AA1AAA - User ID 123123 - pick Ticket ID 7 - Number of lines on the ticket 123124 - pick Ticket ID 10 - Number of lines on the ticket 123125 - pick Ticket ID 6 - Number of lines on the ticket AA1BBB - User ID..........................
