Advanced Filter - Extract List Of All Items But Only With Latest Date Of Each
Jan 20, 2012What criteria can I use to filter a list on and item and the latest date?
I need to extract a list of all items but only with the latest date of each ...
ADVERTISEMENT
Extract Latest Date To Particular Date From Different Date List
Mar 9, 2014i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
VBA - Advanced Filter / Find Row Items To Remove Based On Multiple Criteria
Jun 28, 2014I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
Advanced Filter To Extract Records That Meet The Criteria
Nov 2, 2008I am trying to use an advanced filter to extract records that meet the criteria in the blue input cells. I can't get the criteria correct to allow me to meet the 3 conditions. There are duplicate names in the list so I will need to use unique records only option....
View 9 Replies View RelatedAdvanced Filter To Filter A List Of Data
Jan 14, 2010How do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
Filter For Latest Date
Nov 26, 2009I have a data field of about 2000 rows & 30 columns.
These contain records on accidents for 56 offices.
One of the columns contains the date an individual had the accident.
There can be a number of records for each office as there are a number of employees in each office who have had accidents over the last few years.
I need to be able to run a macro or set up filters or formulae to show the row containing the most recent accidentin each office, by office. I also need to display the total number of days since the last accident occurred at the end of each row.
The offices are listed in Column B & the date of the last accident is listed in Column V.
Extract Latest Date From Wall Of Text?
Mar 27, 2014Lets say I have a wall of text that looks like this, all of it in 1 cell.
[Code] .....
What formula do I use to extract the latest date from this string? In this example, the ideal result will be 02/05/2014 .
Advanced Filter List Criteria
Oct 25, 2011I'm trying to use an advanced filter to filter a large data set using several parameters. I had this worked out before but there have been some parameters added that have thrown my filter off balance and I'm struggling getting it back.
Here's the criteria I need to filter
Column 1:
85
Column 2:
3
Column 3:
BU 1
BU 2
BU 3
BU 4
Column 4:
BA 1
BA 2
BA 3
BA 4
BA 5
BA 6
BA 7
Since I have an uneven list of criteria, I'm struggling to figure out the layout with the 'AND' condition. I know I can copy the 85 and 3 figures to each line but when I have 4 figures in column 3 and 7 figures in column 4, how can I create the 'AND' condition for all these criteria?
Unique List Without Vba Or Advanced Filter
Apr 20, 2009I have a list of item numbers that will be repeated numerous times. I would like to extract a list of unique values that would update when a new number is added. I would really like to do this with formulas. Both of the list will be on the same sheet. I have racked my brain trying to figure out a way to do this. I thought I could use LOOKUP and MAX for the first cell, and then subtract one from the number above for the following LOOKUP formulas. That did not work. Probably because my list is not sorted.
View 9 Replies View RelatedAdvanced Filter Using A Dynamic Date
Dec 2, 2008I need to filter data which is 3 months from todays date or older. I'm going to use it in a macro which downloads the information from our accounts system.
I have set up the filter and it works fine when I manually put the Date in, but when I use the date 'formula' for todays date -3 months and reference the cell its in, it does not work. Here's what I have so far :
The filter from the macro :
Range("A:I").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Range("J1:J2"), Unique:=False
The way I work out the date 3 months from now (in cell K2) :
=DATE(YEAR(TODAY()),MONTH(TODAY())-3,DAY(TODAY()))
Cell J1 has the relevent Column Header
Cell J2 has the following formula :
=" < K2 " (there are no spaces I had to put them in so the post appeared correctly!)
Macro To Automatically Add Totals To The Bottom Of A List Created With Advanced Filter
Mar 5, 2008if it is possible to write/record a macro that will automatically add a summary/total row immediately below the data that is created from an advanced filter. (XL00)
View 12 Replies View RelatedExtract List Of Items From Listbox
Mar 4, 2014I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
Removing Duplicates From List Based On Latest Date?
Jan 6, 2014I am working on a large data file (leasing file), that has many duplicates. The names on the file are duplicated due to the various variable costs associated with leasing. I need to remove the duplicates names based on the latest contract end date.
View 4 Replies View RelatedList Box To Select Multiple Items In Report Filter Of Pivot Table?
Jun 19, 2013I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
Excel 2013 :: Missing Items From Pivot Table Filter List?
Apr 1, 2014Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
Advanced Filter Code - Criteria Range More Than 1 Row Breaks Filter
May 1, 2014I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
Pivot Table - Grouping Items (Date) In Report Filter?
Nov 11, 2013I have a pivot table with the following items;
Report Filter = Project Names & Dates (filtered on 2 fields)
then the pivot table of data shows
Dept, Sum of Hours, Sum of Total ($), Sum of Days
When you click on the drop down to adjust the filter for the Date it gives you the whole list of dates, day by day as it is in the source data.
Is there a way to make it in the filter by month and year, the way it would in an ordinary filter. So if I wanted to have the pivot table show only the values with an October date I can, rather than having to deselect all and then individually check the boxes for the 1st through to the 31st of October.?
Filter>Advanced Filter>Unique Failure
Jun 14, 2009Can anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View RelatedAdvanced Filter :: Filter Data Between Two Dates
Mar 15, 20071- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
Filter With Formula: FILTER A Range And Display The Unique Items, One Below The Other, WITHOUT Blank Cells
Feb 10, 2008How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedFinding Items In A List With Blank Cells Separated By Date
Dec 15, 2011This might be pretty tricky. I'm trying to create formulae that can find non-empty cells in a list, and separate by date.
Example:
The following are given:
DateItem
1/23AAA
1/24
1/25BBB
1/26
1/27
1/28
[Code]....
I would like:
List 1 (Jan) List 2(Feb)
AAA BBB
BBB CCC
The original equation was for finding non-blank items without separating by date was given to me below Hopefully it's much easier with it: [URL]...
Advanced Filter On Name Selection
Apr 8, 2014I have a large Excel with details of 1,000 staff
Column J1 is called: Resource Name which has 1,000+ staff other columns have corresponding Hours, Project names etc
I want an advanced filter where I select COLUMN J:J and filter this whole sheet based on say 25 names (in the format they're in) e.g
Frank, James
Wilkonson, Paul,
etc
In the Advanced Filter, Ive selected J:J as LIST RANGE, but how do I input an OR statement in the Criteria, as above i.e where name is Frank, James OR Wilksonson, Paul OR
Alternatively, I have the list of the 25 names in Sheet 2, can the Advanced Filter do a VLOOKUP then filter entire Sheet based on the names provided?
Using INDIRECT In Advanced Filter
Aug 5, 2014I have a condition in advanced filtering as >90%. However, I would like the "90%" to be calculated via a formula in another cell and this condition to reference it. Is it possible?
View 8 Replies View RelatedAdvanced Filter Using Calculaions
Jul 25, 2006I have a file that has a column of dates. I would like to use advanced
filter to filter anything with a date that is <today()-1 but I can't seem to
make the fomula work. I can make it filter on =today()-1 but when I use the
< it doesn't calculate today's date and gives me nothing.
Automate Advanced Filter
Sep 8, 2009Basically I have set up a list on sheet1, this is now on a drop down in sheet2 and my raw data in sheet3.
I want the table in sheet2 to just display the product items I select in the dropdown but it is displaying all the raw data (although is updating when I update the raw data)
Granted I copied the code whilst researching but I'm just not quite there.
Could someone possibly look at the attached and let me know where I am going wrong. Also as you can tell I am very new to teh VB application in Excel, could anyone reccommend a good place to start learning the very basics?
Advanced Filter Not Filtering In UDF?
Dec 17, 2012why the Advanced Filter works in the macro but not in the UDF?
Code:
Public Function strUniqueVal(rng As Range) 'rng variable must include sheet name
Dim c As Range
rng.AdvancedFilter Action:=xlFilterInPlace, Unique:=True
[Code]....
Advanced Filter - Macro
Mar 24, 2007Having big problems getting an advanced filter macro to work on-going (meaning again and again and again once I update the table it filters from).
Macro is as follows:
Range("A1:O1").Select
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"H1:H2"), CopyToRange:=Range("T1:AH65536"), Unique:=False
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"G1:G2"), CopyToRange:=Range("AM1:BA65536"), Unique:=False
Do I need to specify the sheet that this filter should occur on? If so could someone indicate how I would get that into the macro?
Advanced Filter With Wildcards
Oct 28, 2008I have a worksheet that conatins multiple columns that are populated from a sql query.One column is a parts list.This has 1705 rows.
I have another worksheet that contains a list of parts in one column.This list is varying in row length.
I want to be able to produce a list that only contains matching data , including () around parts and if not too difficult an indication of data that is not in first list but is in second list.
When I do an advanced filter using the second list as the criteria i am not recieving all of the data from the filter , ie in the first list there is parts in (1234XYZ ) but in the second list the part is 1234XYZ , this part is not being resulted in the advanced filter unless I put brackets around the part in the second list . There is no way of knowing which part is in brackets in the first list.
Advanced Filter For Text
Aug 23, 2009I have a huge list (over 900,000 rows) of text codes (e.g. ABC-12345) on Column A Spreadsheet 1 and would like to remove the ones that are not included in Column A Spreadsheet 2.
I changed all of the text on Column A Spreadsheet 2 to have the in front of it (e.g. ABC-1234) and tried to run the advanced filter but it does nothing.
Advanced Filter Cut Instead Of Copy
Feb 9, 2010This code works, but I would like to cut (remove) the records from the original record list.
Range("A:F").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range _
("H1:H3"), CopyToRange:=Range("J1:O1"), Unique:=True
