After Click On Button Move To Specified Column In The Active Row.
I try find function or create macro witch makes move in to the specified column after clicking on button. But this move will be in the same row, where i was last active.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Click The Master Button, That Would Click Another Button On A Different Worksheet
Running into this issue of "transworksheet macros" I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively. What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet. I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
View Replies!
View Related
Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen: That active cell's row is hightlighted. Any cell in that column that has the same value as active cell is also highlighted. Plus, any cell in another sheet that has that value it's row is highlighted too. Example: I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Replies!
View Related
To Highlight Active Row And Column
I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10. Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range) Dim i As Long Cells.Interior.ColorIndex = xlColorIndexNone If Application. CountA(Target.EntireRow) 0 Then i = Target.Row Else For i = Me.UsedRange.Rows.Count To 1 Step -1 If Application.CountA(Me.Rows(i)) 0 Then i = i + 1 Exit For End If Next i End If Rows(i).Interior.ColorIndex = 6 End Sub Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
View Replies!
View Related
First Row (for Column Titles) Not Move
I have been given an Excel file. Upon opening it, I see that the top four rows do not move even if I scroll down. What I'd prefer is that only the first row (for column titles) not move. If I can learn the name of this feature, I'm sure I can figure out how to change the file.
View Replies!
View Related
Paste Formula To Specific Row In Active Column
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View Replies!
View Related
Set Variable To Row & Active Cell Column
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub But I receive this error: Run-time error '91': Object variable or With block variable not set
View Replies!
View Related
Move Column Data To Row Then Delete Those Rows
We have a client that provided us with a text file that we imported into Excel. Rather than have the entire record in one row, they have the record in 4 rows. What I need a macro or something to do is move award 2 award 3 and award 4 into the same row and after doing this delete the other rows. Below is an idea how this looks. 1JohnSmithstreetcitystateZIPaward 1 2JohnSmithstreetcitystateZIPaward 2 3JohnSmithstreetcitystateZIPaward 3 4JohnSmithstreetcitystateZIPaward 4 5BillJonesstreet2city2state2ZIP2award 1 6BillJonesstreet2city2state2ZIP2award 2 7BillJonesstreet2city2state2ZIP2award 3 8BillJonesstreet2city2state2ZIP2award 4 What we need for our data to work is: 1JohnSmithstreetcitystateZIPaward 1award 2award 3award 4 2BillJonesstreet2city2state2ZIP2award 1award 2award 3award 4
View Replies!
View Related
Move Text Data To Next Empty Row In Column
I am importing a 20 character text string (from a barcode scanner) to H2. I need to send that data to the next unused row in Column A (after insuring that no matching text currently exists in Column A-no action taken if matching data is found). I can provide a copy of the sheet, along with a description of the project.
View Replies!
View Related
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Cut & Paste Macro: Move Address From Column To Row
I have an excel worksheet with contact info in columns rather than rows. For example, C1R1 is company name, C1R2 is address, C1R3 is City/St/ Zip, C1R5 is phone. I recorded a macro to cut and paste address to C2R2, C/S/Zip to C3R1 and phone to C4R1. That works but I cannot repeat it as I move down the list. Just re-runs macros over same cells all the time. How do I get it to start and run wherever I want it too? Also, how would I get it to delete the now vacant rows?
View Replies!
View Related
Disable Right Click When A Sheet Is Active
I need to display Excel Sheet in a Browser and I want to disable the Right Click and Menu of Excel(File, Edit). So in the method Workbook_Open i coded following Private Sub Workbook_Open() Application. CommandBars("Worksheet Menu Bar").Enabled = False Application.CommandBars(" Cell").Enabled = False Application.CommandBars("Sheet").Enabled = False Application.CommandBars("Ply").Enabled = False Application.CommandBars("Row").Enabled = False Application.CommandBars("Column").Enabled = False End Sub Private Sub Workbook_BeforeClose(Cancel As Boolean) Application.CommandBars("Worksheet Menu Bar").Enabled = True Application.CommandBars("Cell").Enabled = True Application.CommandBars("Sheet").Enabled = True Application.CommandBars("Ply").Enabled = True Application.CommandBars("Row").Enabled = True Application.CommandBars("Column").Enabled = True End Sub It works fine, but if I open Excel application before viewing this HTML page(which contains XLS) and then the option are also disabled in Stand alone Excel application. I want to disable option when for this Sheet which is opened.
View Replies!
View Related
Active Input Box (Click Tab)
This code works perfectly, assuming I hand enter in the Input Box the sheet name in the correct format 10-08-08 ... etc. I would like to simply be able to click a sheet tab with my mouse instead. However, the hour glass anywhere outside of the input box prevents any mouse action. It has something to do with string, range or variant. I've tried to set all "ShtName" variables to that and it generates errors. How can I change this code so it sill accomplishes the same thing, but the input box allows the user to choose the sheet name with their mouse instead of having to hand type it in? This will prevent human error.
View Replies!
View Related
Right Click On Tab, Move Or Copy: Disable
Is it possible to disable the ability to right click on a tab and select "move or copy"? I've already disabled the Edit->Move or Copy Sheet... feature on the menu. I'm sending a file to users that I don't want them to print. The workbook itself has the print function password protected and copy/paste disabled. Any help would be appreciated. To clarify I already have the printing part solved, but I don't want them to be able to move or copy the tab or tabs to a new workbook and print from there.
View Replies!
View Related
Move Active Cell One To The Right - 2000
What is the command to move the active cell? For example, suppose C15 is the active cell, and I want a macro to move the active cell one to the right. Or maybe 3 to the right, and one down. The deal is, I'd like to be able to make the active cell move in a fixed pattern relative to the cell that is already active (before the macro is run), rather than moving to a final fixed destination (which would be something that even I could figure out). In other words, if I select R20, and run the macro (or whatever other mechanism you guys come up with), then R21 will be selected; likewise, I can click G12, run the macro, and G13 will be selected.
View Replies!
View Related
Button With Macro Do Nothing When Click On It
On a spreadsheet I have a button which has a macro assigned to it, for some reason when I protect the worksheet then then click the button, nothing happens (or though I do get egg timer for a second). but when I unprotect the shet its fine. ive used this type of method many tiems, and cant see what the problem is, have tried all combination of locking and unlocking cells in and around etc, but nothign changes it.
View Replies!
View Related
Click A Button On A Webpage
I am using VBA to pull a web query to get sone info from an intranet site. Unfortunately, the data it pulls is usually old. I've found the only solution is to open a browser manually and to click the Reload button on the web page then navigate back to my workbook and run it again. Then it will pull the most up to date info. I've tried several ways of forcing a refresh of the data, but have not figured it out yet. I have been trying the past couple of hours to use the send keys button to tab down to the button on the page I need and to hit enter, thus forcing a refresh, but I can't seem to get that to work either.
View Replies!
View Related
Macro With A Button Click
I have many workbooks that I receive from clients I run various Excel VBA macros on depending on which workbook it is, and I need to automate all of this so that anyone can run an simple .exe user interface designed in VB 2005 Express Edition where when that interface is run, a window opens on the destop with a collection of buttons, when the user clicks one of the buttons, Excel launches, loads the appropriate file and runs an already-existing appropriate Excel macro, then some file maintenance is done, like moving a group of files from one subdirectory to another.
View Replies!
View Related
Click On Wrong Button
I have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do: I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
View Replies!
View Related
Getting The Name Of The Active Button
how can i get the name of the button thats been pressed? i know it will probably involve Application.Caller but i just have no idea how to get it to work Dim BtNm As String BtNm = Application.Caller MsgBox BtNm this doesnt work but that would prob be obvios to you guys.
View Replies!
View Related
Search And Inputbox When Click On Button
once the command button on sheet 1 is clicked, a input box appears which asks "has this number been entered" and has a place to enter a number within the input box. Once the info is entered in the input box, it searches through sheet 2 for the number. If the number is found, I would like for a box to pop up with the number found and the name that is next to the number from sheet 2. If the number is not found, I would like for a box to pop up and say "number not found"
View Replies!
View Related
UserForm-trying To Open With A Button Click
I have a User Form that I am trying to open with a button click. I made a copy of one workbook with a new name. The Buttons and Macros were all copied as well. I modified the old Userform so that I can release Version 2 of the Userform, and now when I click on the button in Excel, I get the following error : Object doesn't support this property or method. Run-Time error '438'. The code assigned to that button is as follows: Sub Button121_Click() ' ' Button121_Click Macro ' Macro recorded 8/11/2002 by Kale Mayfield ' UserForm1.Show End Sub What am I doing wrong? HELP! Once you have the Userform populated with ComboBoxes,Textboxes, etc., is there now way of making changes to that Userform? If you make changes and rearrange the locations of the buttons and boxes and labels... does that mess up the button in Excel that opens the form to begin with?
View Replies!
View Related
Hide Columns With A Click On A Button
I want to be able to have a set of buttons or a dropdown menu where i can put all the titles of my columns in. After clicking on one of the titles the column must hide or show itself, is there a way to do this? It's for an automated sheet wich contains a lot of information and this will be used by a lot of people, i want to make it easy for people to simply generate a sheet with just the info they need.
View Replies!
View Related
Command Button Click Event
I have a UserForm with 2 command buttons. The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time. I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'. I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.
View Replies!
View Related
Check Against Last Click On Command Button
I'm working with 2 different sheets, sheet1 and sheet2. I'll type in entry 1 to 4. 2 comboboxes, 2 cell values. then click on the command button1. i'll pass over the values to sheet2 like this: array(comboBox1.value, range("a2").value, comboBox2.value, range("a4").value I was asked to check against the last time the user click on the command button. if combobox1.value, range("a2").value, comBoBox2.value, range("a4").value MATCHES exactly the last entry in sheet2, it'll give a popup Box before it continues.
View Replies!
View Related
Radio Button: Just Click To Select The Value
I am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View Replies!
View Related
Button Click Log File
I have a spreadsheet with 6 buttons on it. Ive been using the code from Daves Download Page to log users of the spreadsheet, however im now want to log which button is being clicked the most. Is this possible? Ive tried to do it myself, by adding a hidden sheet, and adding code to each button to add a line to the new sheet each time the button was clicked etc, but faield miserably.
View Replies!
View Related
Change/Move Pivot Table Row Field To Column Field
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View Replies!
View Related
Enter Date In Next Available Cell On Button Click
I have two sheets - Data and Mail. I am using a userform to collate the information in the "data" sheet and have a unique ref number in column A. Data populates columns A - AC. In sheet "Mail" I enter the Ref number and it pulls through the info using vlookups into a template which I then e-mail as the body of the text on the click of a macro button. I wish to capture the date each time the button is clicked in the same data row starting in column AD then AE etc. I have cobbled all of this together by searching around this forum - I have not expertise so please be gentle with me!
View Replies!
View Related
Click Button That Changes Cell Background Colour
The problem is that the cells which need to change are locked and have a object group ontop of them and are not all in one row or column.. The cells which need to change are A4,A5,A6,B6,C6,D6,E6,F6,G6,H2,H3,H4,H5,H6,I6,J6,K2,K3,K4,K5,K6. It sort of a theme changer for my spreadsheet incase people want a change and can do all of it with one click of a button or maybe click on a cell with the colour on it and have that colour copy itself to the range.
View Replies!
View Related
Randomize The Data With One Created Button Click
Suppose in a work book I have a list for data in 5 rows. 1 2 3 4 5 Is there a way to randomize the data with one created button click (like hyperlink button used for linking) so that it may show any random output like 2,1,4,3,5 etc. Next time another click on randomize button creates another set of totaly random order of the 5 data sets.
View Replies!
View Related
Display Message When Click On Command Button
I am a very beginner in VBA Excel 2007 I have a textbox named textbox1, How should i write my command button code so that my textbox will display below message when button was clicked Updates. 1 Dec Monday 10am @ abc swimming complex Alibaba 12345678 Paid100. Please arrange first lesson meet up with student. -Microsoft
View Replies!
View Related
SolverOk Function To Automate Upon The Click Of A Button
I'm using the SolverOk function to automate upon the click of a button. The arguement ValueOf takes the value (58.6) that was keyed into the Solver Parameter menu when I was recording the macro. I'd like the the solver to pick up the figure for ValueOf:= from cell $D$32 instead so that I can just key in any value in $D$32 and then click on the button to get solver to solve for this. I've tried modifying ValueOf:= "$D$32" but the solver still could not pick up the figure from that cell. Private Sub CommandButton1_Click() Range("C32").Select SolverOk SetCell:="$C$32", MaxMinVal:=3, ValueOf:=58.6, ByChange:="$C$33" SolverSolve End Sub End Sub
View Replies!
View Related
|
TRACKER
